Production ofL-glutamate oxidase andin situ monitoring of oxygen uptake in solid state fermentation ofstreptomyces sp. Nl

Effects of water content and carbon and nitrogen sources on the production ofL-glutamate oxidase (GOD) by solid state fermentation (SSF) ofStreptomyces sp. N₁ were investigated in a 250-mL shake flask. The results show that in the solid medium containing wheat bran 98% (w/w), KCl 0.2% (w/w), and MgCl₂ 0.2% (w/w), addition of 2.0-mL water per gram solid medium and 0.4% (w/w) (NH₄)₂SO₄ was the best for GOD production. In this work, we also developed a simple technique forin situ measuring oxygen uptake rate (OUR) and carbon dioxide evolution rate (CER) in SSF in a shake flask based on the principle of Warburg manometer. The method was successfully applied to determine OUR and CER values in SSF ofStreptomyces sp. N₁. The results indicate that the largest OUR value was detected about one or two days ahead of the highest GOD activity reached depending on the fermentation conditions, and the OUR may be used as anin situ indicator of GOD production in the SSF process.     

Production of exocellular polysaccharide by azotobacter chroococcwn

Environmental conditions affect the production of extracellular polysaccharide by Azotobacter chroococcum ATCC 4412. Production of exocellular polymer from a variety of carbon sources depended on the air flow rate. A high sucrose concentration in medium (8%) markedly favored expopolysaccharide production, which reached 14 g/L in about 72 h. In cell suspensions incubated in the presence of 8% sucrose in a nitrogen-free medium, biopolymer final concentration of 9 g/L corresponds to 68 g/g biomass. Maximum efficiency of sucrose conversion into exopolysaccharide peaked at 70% for initial disaccharide concentration of 6%. High performance liquid chromatography and gas liquid chromatography of acid hydrolysates of the exopolymer revealed the presence of mannuronosyl, guluronosyl, and acetyl residues, but not neutral sugars. The infrared spectrum corroborated the presence of carboxylate anions and O-acetyl groups in the exopolymer. Though the presence of more than one kind of polysaccharide cannot be ruled out, these data suggest that, under the experimental conditions used in this work, only a type of alginate-like exopolysaccharide is produced by A. chroococcum ATCC 4412.     

A unified set of proposals for control and design of high speed data networks

In this paper we articulate our philosophy and approach to the design and control of high speed data networks. The object is to put into perspective and to explain the coordination of various isolated pieces of detailed technical analyses that have been reported in several recent papers. In the process we summarize what we have learnt in our recent work and, also, we give indications of the direction of our future work. Our scheme integrates feedback and open loop control. The feedback control is exercised by sliding windows; access controllers regulate bursty sources. All our design proposals are rooted in asymptotic analyses; the justification for asymptotics comes from the largeness of the parameters, such as propagation delay, speed, window size, buffer size, and the number of virtual circuits. This analysis makes a strong case for operating in a specific moderate usage regime, and adaptive dynamic windowing algorithms are given that make this happen; moreover, when in this regime, buffers may be sized aggressively small without jeopardizing performance and the simplicity of the retransmission protocol. The topics in the paper are: model of communication, results on the steady-state behavior of the basic model, access control, small buffers and retransmission protocols, dynamic adaptive windows, bursty sources, and contrast with previous work.I. Mitrani's work was done while AT&T Bell Laboratories.     

A RELATION BETWEEN THE APPARENT VELOCITY AND THE SPECTRAL POWER OF SUPERLUMINAL RADIO SOURCES

It is proved that the apparent transverse velocities β_(app) and the spectral powers at 10GHz P_(10) of the cores of known superluminal sources are correlated. An interpretation ofthis result within the framework of the relativistic jet model shows that the jet Lorentzfactor γ depends on the intrinsic luminosity of the sources. The probable existence of twosubpopulations of the superluminal sources is shown by a linear regression analysis. "Small"sources f i.e. the sources without extended emission or with a distance from the core tothe outer edge of the lobe<20 kpc, show lower β_(app) than the "large" objects; this can beinterpreted as an orientation effect. Since all BL Lac objects belong to the "small" class,this result sheds new light on such a question as why these sources have lower apparent ve-locities than the "classical" superluminal quasars.     

Determination of polycyclic aromatic hydrocarbons (PAHs) in particulate matter collected with low volume samplers

The determination of polycyclic aromatic hydrocarbons (PAHs) contained in samples of particulate matter (PM), collected with low volume pumps, were carried out with an high sensitivity method that comes from several revisions of a previous method. The present work describes how, by using programmable temperature vaporization (PTV) and a mass selective detector with inert ionic source for the GC-MS analysis and the modifications of microwave-assisted extraction (MAE), the sensitivity of the method can be increased.The PAHs chosen for testing the method are: benzo[a]anthracene (BaA), benzo[b]fluoranthene (BbF), benzo[k]fluoranthene (BkF), benzo[a]pyrene (BaP), indeno[1,2,3-cd]pyrene (Ip) and dibenzo[a,h]anthracene (DbA). They, in fact, belong to that group of substances that are the most harmful for human health for their carcinogenicity.PAHs recoveries for spiked standard solutions at different concentrations were between 95 and 100% with relative standard deviation ranging from 1 to 3%. The revised method was validated using a 1649a urban dust standard reference material (SRM). The results obtained were in good agreement with certified values. The high sensitivity of the method allows to carry out analyses using only a half of the sampled filter (usually 47 mm diameter membranes). In this way, the other half can be used for the characterization of the other components of PM (heavy metals, organic carbon, ions, etc). The last step has been constituted by application of the optimized method on real samples collected in two cities located in Southern Italy (Bari and Taranto).     

Combustibles,fuels and their combustion products: A view through carbon isotopes

Stable (i.e. non-radioactive) carbon-isotope composition (δ¹³C) in fuels has been extensively used as an indicator of the processes leading to the generation of their parent crude-oil. With the example of those used in Paris (France), this preliminary study isotopically characterizes fuels and combustibles, as well as the isotopic relations existing with their combustion by-products, i.e. gases (CO₂) and particles (bulk carbon). Results show that δ¹³C in fuels is clearly related to their physical state, with natural gas being strongly depleted in ¹³C while coal yields the highest δ¹³C, and liquid fuels display intermediate values. This relation is also valid for combustion gases, although δ¹³C values of combustion particles form a homogeneous range within which no clear distinction is observed. Combustion processes are accompanied by carbon-isotope fractionation (noted Δ¹³C) resulting from the combustion being incomplete. Carbon-isotope fractionation is strictly negative (Δ¹³C = ?1.3‰) during the formation of combustion gases, but generally positive in particle formation even if values close to zero are observed. Using simple mixing equations for describing the closed system formed by fuel, CO₂ and carbonaceous particles, we discuss the carbon budget for spark-ignition (unleaded gasoline) and diesel engines. Stable carbon isotopes corroborate the already-proved superior efficiency of diesel combustion mode compared with spark ignition, as carbon is preferentially transformed into CO₂.     

Sources and Time-Variations of Reactive Hydrocarbon Immissions in the Atmosphere of Different Industrial and Rural Areas

Abstract

The problem of determining the concentration changes of reactive hydrocarbon immissions as a function of time was solved by means of an automatic gas chromatograph which, without enrichment, could record ethylene and acetylene in ppb concentrations. At the same time various other pollutants were covered, so that by a mutual allocation of the individual components it was possible to identify certain emitter groups. The results clearly show that ethylene and acetylene primarily originate from the combustion processes of the automobiles, while the handling and storage of petroleum products and their processing do not exert any influence on the immission of the two components. By way of time series measurements during a summer week in 1976 with very intensive solar radiation it was possible to show indirect secondary photochemical reactions.     

The MAP/PH/N retrial queue in a random environment

We consider the MAP/PH/N retrial queue with a finite number of sources operating in a finite state Markovian random environment. Two different types of multi-dimensional Markov chains are investigated describing the behavior of the system based on state space arrangements. The special features of the two formulations are discussed. The algorithms for calculating the stationary state probabilities are elaborated, based on which the main performance measures are obtained, and numerical examples are presented as well.     

Sealed Sources. Some Aspects of Development and Production in the German Democratic Republic

Industrially advanced countries and inereasingly also agricultural countries today use radioisotopes as labelled compounds or scaled sources in order to solve their scientific and technological problems.     

Zur Ermittlung der günstigsten Integrationszeitkonstanten bei der Durchstrahlungsprüfung

Bei der kontinuierlichen Durchstrahlungsprüfung von Werkstücken werden überwiegend Meßeinrichtungen, bestehend aus ⁶⁰Co-Strahlungsquelle, Szintillationsdetektor und schreibendem Meßgerät, verwendet 1.