Elastic mechanical grain interactions in polycrystalline materials; analysis by diffraction-line broadening

Abstract

Experimental investigations have revealed that the Neerfeld–Hill and Eshelby–Kröner models, for grain interactions in massive, bulk (in particular, macroscopically isotropic) polycrystals, and a recently proposed effective grain-interaction model for macroscopically anisotropic polycrystals, as thin films, provide good estimates for the macroscopic (mechanical and) X-ray elastic constants and stress factors of such polycrystalline aggregates. These models can also be used to calculate the strain variation among the diffracting crystallites, i.e. the diffraction-line broadening induced by elastic grain interactions can thus be predicted. This work provides an assessment of diffraction-line broadening induced by elastic loading of polycrystalline specimens according to the various grain-interaction models. It is shown that the variety of environment, and thus the heterogeneity of the stress–strain states experienced by each of the individual grains exhibiting the same crystallographic orientation in a real polycrystal, cannot be accounted for by traditional grain-interaction models, where all grains of the same crystallographic orientation in the specimen frame of reference are considered to experience the same stress–strain state. A significant degree of broadening which is induced by the heterogeneity of the environments of the individual crystallites is calculated on the basis of a finite element algorithm. The obtained results have vast implication for diffraction-line broadening analysis and modelling of the elastic behaviour of massive polycrystals.     

TEM investigation of the formation mechanism of deformation twins in Fe–Mn–Si–Al TWIP steels

The microstructure of a Fe–Mn–Si–Al twinning-induced plasticity (TWIP) steel exhibiting remarkable work hardening rate under uniaxial tensile deformation was investigated using transmission electron microscopy to uncover the mechanism(s) controlling the nucleation and growth of the mechanically induced twins. The results show that the stair-rod cross-slip deviation mechanism is necessary for the formation of the twins, while large extrinsic stacking faults homogenously distributed within the grains could act as preferential sources for the activation of the deviation process. The influence of such features on the thickness and strength of the twins and the resulting mechanical behaviour is discussed and compared to similar works recently performed on Fe–Mn–C TWIP steels.     

Contrast analysis of Shockley partial dislocations in 4H-SiC observed by synchrotron Berg–Barrett X-ray topography

Shockley partial dislocations in 4H-SiC were observed using monochromatic synchrotron X-ray topography with a grazing-incidence Bragg-case geometry, that is, Berg–Barrett topography. The contrast of partial dislocations at the edges of Shockley-type stacking faults is discussed in terms of whether they have C- or Si-core edge components, or screw components. The dissociated state of basal-plane dislocation is discussed on a basis of the stacking sequence for basal-planes in the 4H-SiC crystal structure. It is expected that the results obtained in this study will be useful for characterizing Shockley-type stacking faults in Berg–Barrett topography.     

Nanoscratch-induced deformation behaviour in B4C particle reinforced ultrafine grained Al alloy composites: a novel diagnostic approach

We report on the novel application of nanoscratch characterization to provide insight into the plasticity mechanisms responsible for the behaviour of composites. Accordingly, we conduct deformation characterization with nanoscratch testing (DCNT) to study the deformation behaviour of two B₄C reinforced ultrafine grained Al alloy tri-modal composites with average B₄C particle sizes of ~1–6?μm and ~500?nm, respectively. To highlight the type of mechanistic information revealed in a DCNT study of composites, we concentrate on the influence of B₄C particle size on deformation mechanisms.     

Long-range chemical interactions in solid-state reactions: effect of an inert Ag interlayer on the formation of L10-FePd in epitaxial Pd(0 0 1)/Ag(0 0 1)/Fe(0 0 1) and Fe(0 0 1)/Ag(0 0 1)/Pd(0 0 1) trilayers

The effect of 0, 0.5, and 1?μm-thick Ag interlayers on the chemical interaction between Pd and Fe in epitaxial Pd(0?0?1)/Ag(0?0?1)/Fe(0?0?1)/MgO(0?0?1) and Fe(0?0?1)/Ag(0?0?1)/Pd(0?0?1)/MgO(0?0?1) trilayers has been studied using X-ray diffraction, ⁵⁷Fe Mössbauer spectroscopy, X-ray photoelectron spectroscopy, and magnetic structural measurements. No mixing of Pd and Fe occurs via the chemically inert Ag layer at annealing temperatures up to 400?°C. As the annealing temperature is increased above 400?°C, a solid-state synthesis of an ordered L1₀-FePd phase begins in the Pd(0?0?1)/Ag(0?0?1)/Fe(0?0?1) and Fe(0?0?1)/Ag(0?0?1)/Pd(0?0?1) film trilayers regardless of the thickness of the buffer Ag layer. In all samples, annealing above 500?°C leads to the formation of a disordered Fe_xPd_1?x(0?0?1) phase; however, in samples lacking the Ag layer, the synthesis of Fe_xPd_1?x is preceded by the formation of an ordered L1₂-FePd₃ phase. An analysis of the X-ray photoelectron spectroscopy results shows that Pd is the dominant moving species in the reaction between Pd and Fe. According to the preliminary results, the 2.2?μm-thick Ag film does not prevent the synthesis of the L1₀-FePd phase and only slightly increases the phase’s initiation temperature. Data showing the ultra-fast transport of Pd atoms via thick inert Ag layers are interpreted as direct evidence of the long-range character of the chemical interaction between Pd and Fe. Thus, in the reaction state, Pd and Fe interact chemically even though the distance between them is about 10⁴ times greater than an ordinary chemical bond length.     

The feasibility of Al-based oxide precipitation in Fe–10%Cr alloy by ion implantation

This paper reports the feasibility of nano-oxide precipitate formation in Fe–Cr alloy by ion implantation synthesis. High contents of Al⁺ and O⁺ ions were implanted into thin films of high purity Fe–10%Cr alloy at room temperature and were studied by transmission electron microscopy (TEM) and atom probe tomography (APT). In contrast, to the common two-stage implantation/annealing scheme of precipitate ensemble synthesis by ion beams, cluster formation took place at the implantation stage in our study, requiring no subsequent high-temperature annealing. The post-implantation microstructural examination revealed in the as-implanted thin foil an array of precipitates with diameters in the range of 3–30?nm. The precipitate number density distribution was found to depend on the foil thickness. The precipitate enrichment with both Al and O was confirmed by the energy-filtered TEM analysis. Judging from the electron diffraction pattern and high-resolution TEM analysis, the crystal lattice of precipitates corresponds to some cubic modification of aluminium-rich oxide or pure aluminium oxide. The precipitate lattice alignment with the host matrix was revealed for at least a part of precipitates. The analysis of APT data using cluster detection algorithm indicates the presence of local zones enriched in Al and O, even in those areas of as-implanted samples where no clusters were visible by TEM.     

Dislocation-density-based constitutive modelling of tensile flow and work-hardening behaviour of P92 steel

The flow and work-hardening behaviour of tempered martensitic P92 steel have been investigated using phenomenological constitutive model in the temperature range 300–873 K for the strain rates ranging from 3.16 × 10^?5 to 1.26 × 10^?3 s^?1. The analysis indicated that the hybrid model reduced to Estrin–Mecking (E–M) one-internal-variable model at intermediate and high temperatures. Further, the analysis also indicated that dislocation dense martensite lath/cell boundaries and precipitates together act as effective barriers to dislocation glide in P92 steel. The flow behaviour of the steel was adequately described by the E–M approach for the range of temperatures and strain rates examined. Three distinct temperature regimes have been obtained for the variations in work-hardening parameters with respect to temperature and strain rate. Signatures of dynamic strain ageing in terms of the anomalous variations in work-hardening parameters at intermediate temperatures and the dominance of dynamic recovery at high temperatures have been observed. The evaluation of activation energy suggested that deformation is controlled by the dominance of cross-slip of dislocations at room and intermediate temperatures, and climb of dislocations at high temperatures.     

Decomposition model for phonon thermal conductivity of a monatomic lattice

An analytical treatment of decomposition of the phonon thermal conductivity of a crystal with a monatomic unit cell is developed on the basis of a two-stage decay of the heat current autocorrelation function observed in molecular dynamics simulations. It is demonstrated that the contributions from the acoustic short- and long-range phonon modes to the total phonon thermal conductivity can be presented in the form of simple kinetic formulas, consisting of products of the heat capacity and the average relaxation time of the considered phonon modes as well as the square of the average phonon velocity. On the basis of molecular dynamics calculations of the heat current autocorrelation function, this treatment allows for a self-consistent numerical evaluation of the aforementioned variables. In addition, the presented analysis allows, within the Debye approximation, for the identification of the temperature range where classical molecular dynamics simulations can be employed for the prediction of phonon thermal transport properties. As a case example, Cu is considered.