Novel anti-inflammatory and wound healing controlled released LDH-Curcumin nanocomposite via intramuscular implantation,in-vivo study

One of the most common problems in wounds is delayed healing and complications such as infection. Therefore, the need for novel materials accelerates the healing of wounds especially abdominal wounds after surgery besides high efficiency and safety is mandatory. The rate of wound healing, anti-inflammatory and biocompatibility of Zn-Al LDH (Zn-Al layer double hydroxide) alone and loaded with Curcumin (Zn-Al LDH/Curcumin) was screened via in-vivo assays through intramuscular implantation in rat abdominal wall with intact peritoneum cavity. The implanted drugs were formed through Curcumin loaded into LDH of Zn-Al with drug release of 56.78 ± 1.51% within 24 h. The synthesized nanocomposite was characterized by (TGA/DTA) thermal analysis, (XRD) X-ray diffraction, (FESEM) Field emission scanning electron microscopy, (HRTEM) high resolution transmission electron microscope, energy dispersive X-ray (EDX) and low-temperature N₂ adsorption, pore volume and average pore size distribution. The integrity of blood circulation, inflammatory signs, wound healing rate, capacity of tissue integration, antigenicity and composite biocompatibility, auto fluorescence ability of collagen bundles and the tensile strength of the muscle were assessed histopathologically after 7 and 30 days’ post-implantation. Excellent wound healing ability was achieved with shortest length between the wound gap edges and higher tensile strength of the muscle. Besides emit florescence very well followed by good healing and tensile muscles strength in Curcumin while very low strength with scar formation in Zn-Al LDH/Curcumin in both acute and chronic wound. No signs of inflammation in Curcumin & Zn-Al LDH. No vessels obstruction or bleeding observed in both Zn-Al LDH and Curcumin more than Zn-Al LDH/Curcumin and control which examined through candling. Good healing & infiltrated immune cells in same groups through histopathological examination. This work supports the anti-inflammatory, wound healing and biocompatibility of both LDH and Curcumin with living matter, increasing their biomedical applications in this era with safety and increasing efficacy with prolonged drug release.     

Quantitative analysis of delta9-tetrahydrocannabinol in preserved oral fluid by liquid chromatography-tandem mass spectrometry

A rapid and sensitive method for the analysis of delta9-tetrahydrocannabinol (THC) in preserved oral fluid was developed and fully validated. Oral fluid was collected with the Intercept, a Food and Drug Administration (FDA) approved sampling device that is used on a large scale in the U.S. for workplace drug testing. The method comprised a simple liquid-liquid extraction with hexane, followed by liquid chromatography-tandem mass spectrometry (LC-MS-MS) analysis. Chromatographic separation was achieved using a XTerra MS C18 column, eluted isocratically with 1 mM ammonium formate-methanol (10:90, v/v). Selectivity of the method was achieved by a combination of retention time, and two precursor-product ion transitions. The use of the liquid-liquid extraction was demonstrated to be highly effective and led to significant decreases in the interferences present in the matrix. Validation of the method was performed using both 100 and 500 MicroL of oral fluid. The method was linear over the range investigated (0.5-100 ng/mL and 0. 1-10 ng/mL when 100 and 500 microL, respectively, of oral fluid were used) with an excellent intra-assay and inter-assay precision (relative standard deviations, RSD <6%) for quality control samples spiked at a concentration of 2.5 and 25 ng/mL and 0.5 and 2.5 ng/mL, respectively. Limits of quantification were 0.5 and 0.1 ng/mL when using 100 and 500 microL, respectively. In contrast to existing GC-MS methods, no extensive sample clean-up and time-consuming derivatisation steps were needed. The method was subsequently applied to Intercept samples collected at the roadside and collected during a controlled study with cannabis.     

一种非定常N-S方程并行求解设计

为了解决计算流体力学(CFD)中非定常计算与越来越大的计算量,并行计算已成为一种现实有效的选择.论文首先研究了一种并行区域分解策略,该策略简单而高效,但需要算法配合.为此,采用了一种与并行完全兼容的隐式方法DP-LUR方法.通过双时间步长法,将DP-LUR方法延伸应用到非定常计算中而不改变其原有的性质.最后分析了并行编程中的主要难点,提出解决方法,即采用中间数据分离节点下标与处理,并给出了并行程序的总体结构.     

A primitive-variable Riemann method for solution of the shallow water equations with wetting and drying

A Riemann flux that uses primitive variables rather than conserved variables is developed for the shallow water equations with nonuniform bathymetry. This primitive-variable flux is both conservative and well behaved at zero depth. The unstructured finite-volume discretization used is suitable for highly nonuniform grids that provide resolution of complex geometries and localized flow structures. A source-term discretization is derived for nonuniform bottom that balances the discrete flux integral both for still water and in dry regions. This primitive-variable formulation is uniformly valid in wet and dry regions with embedded wetting and drying fronts. A fully nonlinear implicit scheme and both nonlinear and time-linearized explicit schemes are developed for the time integration. The implicit scheme is solved by a parallel Newton-iterative algorithm with numerically computed flux Jacobians. A concise treatment of characteristic-variable boundary conditions with source terms is also given. Computed results obtained for the one-dimensional dam break on wet and dry beds and for normal-mode oscillations in a circular parabolic basin are in very close agreement with the analytical solutions. Other results for a forced breaking wave with friction interacting with a sloped bottom demonstrate a complex wave motion with wetting, drying and multiple interacting wave fronts. Finally, a highly nonuniform, coastline-conforming unstructured grid is used to demonstrate an unsteady simulation that models an artificial coastal flooding due to a forced wave entering the Gulf of Mexico.     

圆形高斯镜平凹腔腔镜倾斜时光场模式分析

运用边界元素法把圆形高斯镜平凹腔的自再现模的衍射积分方程转化为有限阶矩阵方程。计算了谐振腔在理想情况和高斯反射率平面输出镜倾斜情况下基模的场强分布、相位分布和本征值。研究表明,腔镜倾斜使激光场模式分布沿发生倾斜的方向向镜边缘偏移,而且在腔镜倾斜较严重时模式分布发生畸变,不再是对称的拉盖尔-高斯基模分布。基模本征值随倾斜角增大而变小,光束远场分布变差。减小高斯分布反射率的膜斑半径,则能减弱因倾斜引起的模式畸变。     

Newton trajectories for the tilted Frenkel–Kontorova model

ABSTRACT

Newton trajectories are used for the Frenkel–Kontorova model of a finite chain with free-end boundary conditions. We optimise stationary structures, as well as barrier breakdown points for a critical tilting force were depinning of the chain happens. These special points can be obtained straight forwardly by the tool of Newton trajectories. We explain the theory and add examples for a finite-length chain of a fixed number of 2,?3,?4,?5 and 23 particles.