自紧身管疲劳寿命的可靠性分析

基于概率断裂力学理论和Monte Carlo模拟方法，给出了自紧身管疲劳寿命的可靠性分析方法．自紧残余应力采用了符合身管材料具有强化和包辛格效应性能推导的公式计算，身管工作的应力强度因子通过权函数方法得到．实例分析结果表明，对数正态分布为身管疲劳寿命的最佳分布，同时给出了各种置信度和可靠度下的身管疲劳寿命．另外，还分析了初始裂纹尺寸和材料的断裂韧性对身管疲劳寿命的影响．该研究对保证身管的安全，避免灾难性事故的发生具有重要意义．     

Effect of Boundary-Layer Thickness on the Structure of a Near-Wall Flow with a Two-Dimensional Obstacle

Results of physical and numerical experiments on investigating the effect of the depth of immersion of a two-dimensional obstacle with a square cross section into a developed turbulent boundary layer on the length of the separated flow region are presented. The numerical simulation is based on solving averaged Navier–Stokes equations with the use of the k– model of turbulence. The near-wall flow is visualized in the experiments, and the fields of mean and fluctuating velocities are measured. Flow regions where the results of numerical simulation agree with experimental data are determined. It is shown that the length of the recirculation flow region in the near wake increases with decreasing depth of immersion of the two-dimensional obstacle into the turbulent boundary layer.     

Conjugate natural convection from an array of discrete heat sources: part 2 — a numerical parametric study

Coupled conduction and natural convection transport within a discretely heated cavity have been investigated numerically. One vertical wall of the cavity is composed of discrete, isoflux heat sources mounted in a substrate of finite thermal conductivity. The opposite vertical wall and the horizontal walls are assumed to be isothermal and adiabatic, respectively. The governing steady-state partial differential equations for the fluid and solid region are solved simultaneously using a control volume formulation, coupled with an additive correction multigrid procedure that increases the convergence rate of the solution. The fluid Prandtl number and heater/fluid thermal conductivity ratio are fixed at 25 and 2350, respectively, corresponding to a dielectric fluid (FC-77) and heaters manufactured from silicon. With increasing modified Rayleigh number (10⁴ < Ra_Lz^* < 109), the cavity flow becomes more boundary layer-like along the vertical walls, and multiple fluid cells develop in the central region. Thermal spreading in the substrate increases with decreasing modified Rayleigh number and with increasing values of the substrate/fluid thermal conductivity ratio (10⁻¹ <- R_s ≤ 10³). For large R_s, the discrete heat sources lose their thermal identity, and the streamlines and isotherms resemble those associated with a differentially heated cavity. Thermal spreading in the substrate also has a significant effect on circulation in the cavity and on maximum surface temperatures.     

一种改进的分块隐式数值方法

提出了一种改进的分块隐式数值方法，在贴体坐标和交错网格下以逆变速度分量和压力Ｕ，Ｖ，Ｗ，ｐ为基本求解变量，由此克服了原分块隐式数值方法求解复杂边界流动时的困难．９０°弯管流动数值计算初步表明，本文提出的方法合理、可行     

Effect of the Geometry of the Working Chamber of a Cylindrical-Conical Hydrocyclone on the Non-Newtonian Fluid Dynamics

Numerical simulation is used to study the dynamics of non-Newtonian free-surface flow in a cylindrical-conical hydrocyclone. For different angles of taper of the conical section of the hydrocyclone, the pressure and velocity distributions are calculated, together with the dependence of the fluid film thickness on the axial coordinate. The effect of the rheological properties of the fluid and the controlling similarity parameters on the flow dynamics is studied.__________Translated from Izvestiya Rossiiskoi Academii Nauk, Mekhanika Zhidkosti i Gaza, No. 2, 2005, pp. 102–112.Original Russian Text Copyright © 2005 by Yablonskii.     

连铸结晶器内部流场及熔渣卷入的数值模拟

针对连铸结晶器内部流场及熔渣卷入过程 ,提出了两方程k -ε湍流模型和充填法数值计算模型 ,并采用硅油 /水模拟体系代替熔渣 /钢液体系 ,进行了模拟试验和数值计算。对充气造成的浸入式水口水流脉动的影响进行分析。计算结果与试验结果符合良好 ,表明本文所采用的数值模拟方法是适用的     

Numerical simulation of supersonic reacting mixing layer

In this paper, the supersonic chemically reacting mixing layer is simulated with the third order ENN scheme, based on the Navier-Stokes equations, containing transport equations of all species. The numerical results show that the thickness of mixing layer increases gradually along the flow direction, and that the Kelvin-Helmholtz instabilities may not exist in mixing layer flows. The project supported by the National Natural Science Foundation of China     

京承高速公路新道沟连拱隧道的优化设计

本文以京承高速公路新道沟连拱隧道为实例,应用有限元数值方法对连拱隧道二次衬砌的围岩抗力、应力、变形及其稳定性等问题进行了模拟与分析。首先,基于连拱衬砌的结构型式,作者建立了该隧道的数值模型,并提出用弹性杆单元按作用力等效的原则模拟围岩抗力;根据数值模拟结果对隧道支护结构的承载能力进行了讨论,并基于规范对二次衬砌进行了结构强度校核。该研究结果为新道沟隧道支护结构设计的优化提供了科学依据。     

用ADINA确定热电厂磨煤机打击轮磨损极限

利用ＡＤＩＮＡ程序计算磨损后打击轮的应力分布状态；根据强度理论，得到磨损极限，为打击轮维修提供了依据．实践证明，不超过磨损极限的打击轮修复以后可以满足使用精度要求，其使用期限与新的打击轮相同．磨损极限的确定为国家创造了经济效益     

具有半边裂纹导电薄板放电瞬间的温度场数值模拟

采用数值模拟方法 ,模拟计算了具有半边裂纹的导电薄板在放电瞬间的温度场分布。计算结果表明 :在裂纹尖端附近由于电磁热的集中效应 ,可使材料熔化形成焊口 ,裂纹尖端处的曲率半径显著增大 ,并且焊口的温度分布与形状是不完全对称的。裂纹尖端焊口形状的模拟计算结果与试验结果非常吻合。从温度梯度的分布结果可知 ,裂纹前缘附近在放电过程中将产生很大的压应力 ,可显著减少甚至是消除裂纹前缘处的扩展应力数值 ,抑制了裂纹主干线的形成 ,可达到遏制裂纹扩展的目的