2-(8-羟基喹啉-5-磺酸-7-偶氮)-1,8-二羟基-3,6-萘二磺酸与牛血清白蛋白的相互作用

用平衡透析法和分光光度法研究了 2 (8 羟基喹啉 5 磺酸 7 偶氮 ) 1,8 二羟基 3,6 萘二磺酸与牛血清白蛋白 (BSA)在酸性溶液中的结合反应 ,认为 8Q5SAC与BSA之间的结合力是以静电引力为主的非共键作用力 ,并探讨了其结合模型。在 2 98K下 ,测得这一反应的最大结合数为 35～ 40 ,结合常数为 6 .1× 10 5L mol。还研究了溶液基本条件如酸度和离子强度等对 8Q5SAC与牛血清白蛋白分子复合物形成的影响 ,在pH =3.34条件下 ,标准工作曲线的线性范围为 0 .2 0～ 46 .90mg L。     

K-Mo基催化剂的表面酸性与其合成醇选择性

对500℃和800℃焙烧制得的氧化态K－MoO3／γ－AlO3，K－MoO3／SiO2及非负载K－Mo催化剂进行硫化后，测试其合成醇活性．结果表明500℃焙烧制得的负载型催化剂显示较高的合成低碳烃活性和较低的合成低磷醇选择性，经800℃焙烧后，合成低磷醇的选择性大幅度提高．500℃焙烧的非负载K－Mo催化剂显示较高的合成醇选择性，经800℃焙烧后，促碳醇的选择性保持不变．用氨的吸附及TPD方法测定了各样品的酸性，并与催化剂活性对照，发现催化剂酸性越强，酸量越大，则其合成醇选择性越低．催化剂上的乙醇分解实验证实，催化剂的酸量大小与它的醇分解活性成正变关系，这些结果说明催化剂酸性对其合成醇性能有直接的影响．     

CexTi1-xO2复合氧化物的结构及负载CuO对NO还原性能研究

采用共沉淀法制备了不同摩尔比(x=0,0.1,0.2～0.9,1.0)的CexTi1-xO2复合氧化物,考察了CuO/CexTi1-xO2对NO+CO反应的活性,并用BET,TPR和XRD等技术对各试样进行了表征。结果表明,试样的结构和还原特性随焙烧温度变化而变化。XRD检测表明,x值从0.1增加到0.5时,650℃焙烧的试样已形成了CeTi2O6物相,且主要以无定形状态存在;试样经800℃焙烧后晶化完全;x>0.6时,一些TiO2已经进入了CeO2晶格,形成了Ce Ti固溶体。催化剂活性评价表明CuO/CexTi1-xO2(650℃)对NO+CO反应具有较好的活性,其活性随x值变化而变化。TPR及XRD结果表明CuO与CeTi2O6之间存在很强的相互作用,CeTi2O6物相的形成使CuO的还原峰温由380℃提前到200℃,而CuO的存在又促进CeTi2O6的还原峰温从600℃提前至200～300℃。     

流通池光度滴定法应用—络合反应中的质子释放数测定

用具有流通池的分光光度计作测定装置,建立了由平衡移动法测定络合反应中质子释放数的新方法。方法简单、快速,仅用一个标准溶液,适于在变更pH值范围内金属离子不发生水解和没有其他副反应的体系。     

Excess enthalpies of solution of some primary and secondary alcohols in sodium dodecylsulfate micellar solutions

The exces enthalpies of solution of some primary and secondary alcohols in aqueous sodium dodecylsulfate micellar solutions were measured and the results were explained by considering the distribution of alcohols between aqueous and micellar phases. The distribution constant and the enthalpy of transfer (and the standard free energy and entropy of transfer) were obtained. The thermodynamic parameters for the transfer of secondary alcohols from the aqueous to the sodium dodecylsulfate (NaDS) micellar phase differ slightly from those of the corresponding primary alcohols. For both series of alcohols the additivity rule holds for free energies of transfer whereas enthalpies and entropies display convex curves. The present data are compared to those for the transfer of the same solutes from the aqueous to the dodecyldimethylamine oxide (DDAO) and dodecyltrimethylammonium bromide (DTAB) micellar phases. The role of the hydrophilic interactions between the OH group and the micelles' head groups is formulated. The thermodynamics of the branched methyl group were determined. Furthermore, the thermodynamics of solvation of primary alcohols in water, in NaDS micelles, and in octane have been calculated using reference states based on the assumption that the empty space around alcohols in the initial and final states is the same. It is shown that the solvation of alcohols in NaDS micellar phase is enthalpy driven and that the thermodynamic properties of solvation vs. the length of the alcohol tail is the same for water and NaDS micelles whereas it is different for octane. A possible explanation for this difference is that the alkyl chain of alcohols folds in octane.     

Shape analysis based critical Eotvos numbers for buoyancy induced partial detachment of oil drops from hydrophilic surfaces

Removal of oil drops from solid surfaces immersed in an aqueous medium is of interest in many applications. It has been shown that drop shape analysis can be used to predict conditions at which the stability limit of a lighter than water oil drop on a solid surface immersed in an aqueous bath is reached (Adv. Colloid Interface Sci. 98 (2002) 265). However the above analysis is restricted to cases where the contact angle made by the drop is below 90degrees and when the surface conditions result in a 'pinned' contact line. In this paper, it is shown that drop shape analysis can be used to predict the critical conditions at which drop stability limit is reached for drop contact angles of 90degrees and above, which is encountered with 'hydrophilic' surfaces. This critical condition can predict the occurrence of partial oil drop detachment, before complete removal due to 'roll-up', which occurs when the hydrophilic surface is adequately smooth which prevents 'pinning' of the contact line. The critical conditions at which partial drop detachment occurs can also be approximately predicted from simple force balances. It has been shown (Adv. Colloid Interface Sci. 98 (2002) 265) that for contact angles less than 90degrees, the critical limit based on shape analysis appears to resolve the differences that arise due to alternate expressions for capillary retention force. This paper shows that even for contact angles above 90degrees, the critical conditions predicted from the shape analysis resolves the differences in the predictions from the alternate force balances. Drop shape analysis used in this paper is based on the 'Arc-length' form of Young-Laplace or 'drop shape' equation, which is different from the 'Y vs X' form of the above equation that is used in Adv. Colloid Interface Sci. 98 (2002) 265. The above drop shape equation is solved by a fourth order Runge-Kutta technique and it is shown that for angles less than 90degrees, the two forms of the drop shape equation, predict almost identical values of the critical Eotvos number. This paper highlights the competing effects of interfacial tension lowering induced drop instability and 'roll-up', a term that is used to describe the retraction of the contact line of an oil drop on a surface, in being the primary c ause for drop detachment.     

6元素集合上T0拓扑总数的计算

文中证明了有限预序集与有限偏序集的一些性质,并基于有限集上的拓扑和其上预序的一一对应关系,利用这些性质通过对极小元和极大元个数进行分类讨论,以一种有别于计算机算法而又容易理解的计算方法得出6元素集合上的T₀拓扑总数为130023.     

考虑偏差值的中立型区间交叉效率研究

在不确定性环境下,当决策单元(DMU)的投入产出数据为区间数形式时,为解决决策单元之间既不是合作也不是竞争关系时的交叉评价问题,本文提出一种中立型区间交叉效率模型。从所有被评价者的角度出发解决评价权重的选取问题,以决策单元投入得分的平均偏差与产出得分的平均偏差之和最小化为目标,建立决策单元在最佳和最差两种生产状态下的中立型区间交叉效率模型。在本文提出的中立型模型视角下,DMU的投入得分平均偏差和产出得分平均偏差之和达到最小。算例结果表明该中立型区间交叉效率模型的有效性,解决了不确定性环境下的交叉评价问题,保证评价的客观公正,更加符合现实。     

Low Mach number limit of inviscid Hookean elastodynamics

The low Mach number limit of inviscid Hookean elastodynamic equations is rigorously proved in bounded domain, whole space and periodic domain, respectively. The uniform existence of smooth solutions and convergence results as the Mach number tends to zero are obtained in three different domains.