全息散斑条纹的提取及图像处理

介绍了一种新的全息散斑条纹的提取方法.理论和实验表明:对全息散斑底片逐点再现时,两伴生亮斑条纹是全息散斑底片一级衍射光的杨氏干涉条纹,与中央的杨氏条纹是一致的,有较高的条纹对比度且没有背景光晕的影响.利用计算机数字图像处理技术对伴生散斑条纹进行处理,定量测试了受静载物体的面内位移.     

成像光谱技术中机上实时数据压缩方法研究

根据成像光谱仪的特点用一系列串行的一维压缩实现二维图像压缩.提出了在机上对原始数据从光谱方向进行实时压缩的“二真值线性预测方法”.该法可做到压缩/复原后光谱特征信息不丢失.实验表明,对大多数光谱数据在1%的重建精度下,至少可获得2:1的压缩比.从总体而言,压缩后原始数据率可降低3～4倍.文中还对压缩数据的编码和误差进行了讨论.     

热活化延迟荧光聚合物及其电致发光器件

热活化延迟荧光(TADF)聚合物,不仅具有小分子TADF材料高的激子利用效率特性,而且还具备分子多样性好、可溶液加工、低成本、以及易实现大面积柔性器件等诸多优势,在近几年受到广泛的关注并展现了良好的应用前景。本文从TADF聚合物分子设计原理、器件结构及发光机理出发,依据TADF聚合物的构筑方法不同,概括了其结构设计策略,详述了各种类型TADF聚合物的分子结构和光电性能及其在有机电致发光器件领域应用的研究进展,最后探讨了TADF聚合物存在的问题,并展望了其发展前景。     

傅里叶变换技术在紫外可见光谱区的应用

本文评述了傅里叶变换在紫外可见光谱区的应用，探讨了傅里叶变换在紫外可见光谱学以及信号处理两方面的内容。详细介绍了傅里叶变换在紫外可见区遇到的问题、主要优点和发展前景。     

无相移滤波技术用于分析化学信号处理

把无相移滤波技术引入了分析化学信号处理领域。其方法为：先将输入序列按顺序滤波，然后将所得结果逆转后反向通过滤波器，再将所得结果逆转后输出。通过对色谱信号的实验研究表明，与普通的数字滤波方法相比较，无相移滤波不但具有普通数字滤波的优点，而且不会产生滤波前后的相位偏移，具有良好的应用前景，尤其对于需要准确计算保留时间的场合，用此预处理方法非常适合。     

Multivariate calibration of near infrared spectra by orthogonal WAVElet correction using a genetic algorithm

Orthogonal WAVElet correction (OWAVEC) is a pre-processing method aimed at simultaneously accomplishing two essential needs in multivariate calibration, signal correction and data compression, by combining the application of an orthogonal signal correction algorithm to remove information unrelated to a certain response with the great potential that wavelet analysis has shown for signal processing. In the previous version of the OWAVEC method, once the wavelet coefficients matrix had been computed from NIR spectra and deflated from irrelevant information in the orthogonalization step, effective data compression was achieved by selecting those largest correlation/variance wavelet coefficients serving as the basis for the development of a reliable regression model. This paper presents an evolution of the OWAVEC method, maintaining the first two stages in its application procedure (wavelet signal decomposition and direct orthogonalization) intact but incorporating genetic algorithms as a wavelet coefficients selection method to perform data compression and to improve the quality of the regression models developed later. Several specific applications dealing with diverse NIR regression problems are analyzed to evaluate the actual performance of the new OWAVEC method. Results provided by OWAVEC are also compared with those obtained with original data and with other orthogonal signal correction methods.     

The Effect of Preparation Method and Calcination Temperature on the Crystallite Size and Surface Area of Perovskite-Type SrFeO x

We have investigated the synthesis of perovskite-type SrFeO_x (2.5 x 3.0) using three preparative methods: sol-gel, mechanochemical processing and solid state reactions at high temperature of the corresponding oxides. The sample obtained after calcination of the gel from sol-gel method, contained the least amount of strontium carbonate impurity. The amount of strontium carbonate impurity decreased with the increase in calcination temperature. Perovskites obtained have been characterized by X-ray diffraction (XRD) and nitrogen adsorption isotherms. Samples obtained from three methods have been compared with respect to calcination temperature, crystallite size and specific surface area.Issued as NRCC No. 46479.     

Surface Modification of Fine Particles with a SnO<Subscript>2</Subscript> Film by Using a Polyhedral-Barrel Sputtering System

Fine particles were modified with a thin film of SnO₂ by using a barrel sputtering system that is a dry process. The conditions for the preparation of SnO₂ were studied by reactive sputtering onto a glass plate substrate. The optimal conditions for the preparation of tetragonal SnO₂ were identified as 60% partial oxygen pressure and 1.0 Pa total gas pressure with the substrate at room temperature. Under the optimized conditions, the surfaces of Al flake particles were modified with a thin film of SnO₂. XRD and SEM/EDS analysis of the prepared samples showed that the Al particle surfaces were uniformly modified by a thin film of SnO₂ in all cases. The film thicknesses were 80, 130, and 180 nm at RF outputs of 195, 350, and 490 W. These measured thicknesses coincided with the values estimated from the interference colors of the samples.     

Sol-Gel Processing of PbZrO3 Thin Films

PbZrO₃ (PZ) thin films have been prepared by 2-methoxyethanol route from lead oxide or lead acetate and zirconium n-butoxide. The use of lead oxide as lead source and the seeding layer of TiO₂ on Pt/TiO₂/SiO₂/Si substrate facilitate the formation of the perovskite phase.     

Synthesis and characterization of 3-phenylethynyl endcapped matrix resins

The synthesis of 3-phenylethynylphenol, and its applicability as a high temperature cross-linking endcap for high T_g polyarylene ethers is described. It was synthesized in high yields and purity using the palladium catalyzed coupling reaction between the protected 3-bromo or iodo phenol and phenylacetylene. The yield of the reaction was found to be highly dependent on the structure of the halide used, the reaction temperature, and the concentration of phenylacetylene. The use of the protected phenol in the palladium catalyzed reaction was also extended to the high yield synthesis of 3-ethynylphenol and protected 4-ethynylphenols. The complete synthesis of 3-phenylethynylphenol, 3-ethynylphenol, and protected 4-ethynylphenol in high yields has been demonstrated and is discussed herein. Three new phenylethynyl functionalized arylene ether matrix resins have been synthesized in high yields and purity by reacting 3-phenylethynylphenol with 4,4′-dichlorodiphenyl sulfone, 4,4′-difluorobenzophenone, and bis(4-fluorophenyl)phenyl phosphine oxide, via nucleophilic poly(arylene ether) synthesis conditions. These low molecular weight materials undergo thermally induced chain extension/branching to yield an insoluble three-dimensional network at reaction temperatures of around 380°C. The low molecular weight arylene ethers endcapped with the phenylethynyl group demonstrate excellent flow characteristics and a wide processing window of about 250°C. Crosslinking of the 4,4′-bis(3-phenylethynyl phenoxy)diphenyl sulfone system for 30 min at 350°C in air afforded a T_g value of 265°C by differential scanning calorimetry measurements. Trace metal analysis for palladium and copper showed absence of these metals that would otherwise detract from the excellent thermal stability. The synthesis and characterization of these phenylethynyl endcapped arylene ether matrix resins is discussed. © 1995 John Wiley & Sons, Inc.