Algebraic Shifting of Finite Graphs

In the present article, for bipartite graphs and chordal graphs, their exterior algebraic shifted graph and their symmetric algebraic shifted graph are studied. First, we will determine the symmetric algebraic shifted graph of complete bipartite graphs. It turns out that for a ≥ 3 and b ≥ 3, the exterior algebraic shifted graph of the complete bipartite graph K _a,b of size a, b is different from the symmetric algebraic shifted graph of K _a,b . Second, we will show that the exterior algebraic shifted graph of any chordal graph G coincides with the symmetric algebraic shifted graph of G. In addition, it will be shown that the exterior algebraic shifted graph of any chordal graph G is equal to some combinatorial shifted graph of G.     

超高速光纤耦合声光调制器的设计及其应用

为实现小于10 ns光脉冲上升时间的超高速声光调制,该文提出一种光纤耦合声光调制器光脉冲时域响应的理论设计仿真方法。利用该方法对1064 nm和1550 nm工作波长光纤耦合声光调制器进行了仿真,结果预测器件的光脉冲上升时间分别为9.4 ns和9.1 ns;通过器件制作和测试验证,两个波长的器件实测光脉冲上升时间分别为9.74 ns和9.22 ns,实测与理论仿真结果偏差较小。文章最后对器件在超快光纤激光器种子源光脉冲选单、光纤水听阵列时分复用及潜在的宽带移频应用进行了介绍。     

基于振动弛豫理论提高光抽运太赫兹激光器输出功率的研究

以半经典密度矩阵理论和分子振动弛豫理论为基础,研究添加适当比例缓冲气体与适当减小波导芯径对光抽运太赫兹激光器输出光强的影响.计算结果表明,加入适当比例缓冲气体或适当减小波导的芯径均能提高太赫兹激光的输出光强;同时优化两个参数能进一步提高抽运激光能量转化为太赫兹激光能量的效率,延长工作腔中的有效激活区,延缓抽运饱和效应的出现,提高太赫兹激光输出光强.该研究对提高光抽运太赫兹激光器的能量转化效率、提高光抽运太赫兹激光器的输出功率及实现光抽运太赫兹激光器的小型化有重要的指导意义.     

Experimental line broadening and line shift coefficients of the acetylene ν1 + ν3 band pressurized by hydrogen and deuterium and comparison with calculations

Theoretical and experimental values have been determined for the pressure broadening of the ν₁ + ν₃ band of acetylene by hydrogen and deuterium at 195 K, and experimental values of the pressure shifts have been determined. Theoretical values have been calculated on the basis of a recent potential energy surface using the close coupling scheme. We discuss the detailed contribution of the various rotational angular momenta of the perturbing gas and the ortho and para contribution to the total pressure broadening cross-sections. We give routes to circumvent the computational cost of such calculations. Experimental values have been measured using a tunable diode laser spectrometer assuming a Voigt line shape. These pressure broadening parameters are compared with measurements performed recently at room temperature and with present measurements performed at 195 K in the ν₁ + ν₃ band of acetylene. A satisfactory agreement is obtained with the present results and available ones at 295 K.     

New type of spherical pore Al alloy foam with low porosity and high strength

The Ultra Light Metal Structure with variouskinds of pores (open, close) realizes the lightness andmultifunction of structural material. The functionsinclude lightness (ρ < 1), high specific strength, highenergy absorption, sound insulation, heat insulationand electromagnetism shield. It is one of the hotspotsin material research nowadays[1— . The requirements 6]of high speed movement and high technology make Alalloy foam, which has higher specific st…     

Searching for optimal setting conditions in technological processes using parametric estimation models and neural network mapping approach: A tutorial

Engineering optimization is an actual goal in manufacturing and service industries. In the tutorial we represented the concept of traditional parametric estimation models (Factorial Design (FD) and Central Composite Design (CCD)) for searching optimal setting parameters of technological processes. Then the 2D mapping method based on Auto Associative Neural Networks (ANN) (particularly, the Feed Forward Bottle Neck Neural Network (FFBN NN)) was described in comparison with traditional methods.     

Aligning retention time shifts in HPLC three‐dimensional spectra by icoshift approach combined with data arrangement methods and the release of a graphical user interface

High‐performance liquid chromatography coupled with photodiode array detection has been extensively applied in many fields and the peaks among the analyzed samples can be shifted due to the variations of instrumental and experimental conditions. In multivariate analysis, retention time alignment is an important pretreatment step. Hence, the shifted peaks in high‐performance liquid chromatography coupled with photodiode array detection three‐dimensional spectra should be aligned for further analysis. Being motivated by this purpose, the interval correlated shifting method combined with the proposed data arrangement methods are recommended and employed on high‐performance liquid chromatography coupled with photodiode array detection data as a demonstration. We validate the alignment performance of the proposed method through comparison the consistency of the retention time before and after alignment. The obtained results demonstrated that the proposed method is capable of successful aligning the employed data. Additionally, the interval correlated shifting method combined with the data arrangement modes is implemented in an easy‐to‐use graphical user interface environment and so can be operated easily by users not familiar with programming languages.     

无相移滤波技术用于分析化学信号处理

把无相移滤波技术引入了分析化学信号处理领域。其方法为：先将输入序列按顺序滤波，然后将所得结果逆转后反向通过滤波器，再将所得结果逆转后输出。通过对色谱信号的实验研究表明，与普通的数字滤波方法相比较，无相移滤波不但具有普通数字滤波的优点，而且不会产生滤波前后的相位偏移，具有良好的应用前景，尤其对于需要准确计算保留时间的场合，用此预处理方法非常适合。     

Structural evolution of poly(lactic acid) upon uniaxial stretching investigated by in situ infrared spectroscopy

Structural evolution of poly(lactic acid) (PLA) upon uniaxial stretching was studied with in-situ polarized infrared spectroscopy measurements, and its structural change affected by annealing was also investigated. Band shifting was used to reflect the structural ordering process. It was found that the band at 1302 cm⁻¹ always moves to low wavenumbers before crystallization, indicating the occurrence of intermolecular packing ordering. However, the band at 869 cm⁻¹ shifts to high wavenumbers, which is related to the transition from the amorphous phase to the ordered phase. Interestingly, during stretching, the shifting for the band at 1302 cm⁻¹ always occurs before that for the lower wavenumber band, whereas these two band shifts take place simultaneously under annealing. Based on the different characteristics of the structural evolution under stretching and annealing processes, a critical temperature was found at around 63 °C, which influences the effect weight of kinetic and thermodynamic factors to the crystallization behavior. The effect of the drawing temperature on crystallization and mechanical property of PLA films was also analyzed.