Measurement of edge residual stresses in glass by the phase-shifting method

Control and measurement of residual stress in glass is of great importance in the industrial field. Since glass is a birefringent material, the residual stress analysis is based mainly on the photoelastic method. This paper considers two methods of automated analysis of membrane residual stress in glass sheets, based on the phase-shifting concept in monochromatic light. In particular these methods are the automated versions of goniometric compensation methods of Tardy and Sénarmont. The proposed methods can effectively replace manual methods of compensation (goniometric compensation of Tardy and Sénarmont, Babinet and Babinet-Soleil compensators) provided by current standards on the analysis of residual stresses in glasses.     

轴线平行圆柱体滚动接触时的轴向移动阻力

应用摩擦学中的预位移原理，求解轴线平行的两粗糙圆柱体滚动接触时的轴向移动阻力，分析了轴移速比、法向接触载荷、圆柱体表面粗糙层参数对轴向移动阻力的影响，并给出了计算轴向移动阻力的简化公式．     

基于弱可压与不可压光滑粒子动力学方法的封闭方腔自然对流数值模拟及算法对比

为了对比研究弱可压光滑粒子动力学(WCSPH)方法和不可压光滑粒子动 力学(ISPH)方法在模拟封闭方腔自然对流问题时的特性, 采用粒子位移技术有效地解决了高瑞利数条件下, 拉格朗日型SPH方法模拟封闭方腔自然对流时流体域内的粒子聚集和空穴问题, 将拉格朗日型SPH 方法求解封闭方腔自然对流问题的最高瑞利数提高到了10⁶; 进而通过对比瑞利数分别为10⁴, 10⁵, 10⁶的条件下, 采用拉格朗日型WCSPH、 拉格朗日型ISPH、欧拉型ISPH三种SPH方法模拟得到的封闭方腔速度分布云图、 温度分布云图、壁面努赛尔特数分布曲线和平均努塞尔特数, 分析了三种SPH方法在模拟封闭方腔自然对流时的精度、稳定性和计算效率. 结果表明: 在低瑞利数条件下, 以上三种SPH方法都可以较好地模拟此问题, 在高瑞利数条件下, 欧拉型ISPH方法的模拟结果最为精确; 拉格朗日型WCSPH方法模拟所得结果比拉格朗日型ISPH方法模拟所得结果稍好些. 关键词： 光滑粒子动力学 不可压光滑粒子动力学 粒子位移技术 自然对流     

Drop Size Distribution of O/W Emulsions by Drop Immobilization with Agarose

ABSTRACT

A method for the determination of the drop size distribution of oil-in-water (O/W) emulsions is presented. Water-based coolant emulsions used in rolling mill operations were studied. The emulsions were gelled in agarose so that the oil droplets were immobilized and samples of these gels were measured by confocal laser scanning microscopy (CLSM) and image processing. The influence of the addition of CaCl₂ as an emulsion destabilizer on the size distributions was also studied. The experimental data obtained were compared to those obtained using photon correlation spectroscopy (PCS).     

Measurement of wedge angle of a transparent parallel plate using quasi-monochromatic light source and phase shifting interferometry

A new technique (to our knowledge), for the measurement of residual wedge angle (RWA) of high optical quality transparent nearly parallel plate (PP), using a quasi-monochromatic light source, is presented. Advantages and drawbacks of the technique and the results obtained for a PP, using a filtered white light source, is discussed. A slightly modified optical setup for accurate determination of RWA, using phase shifting interferometry (PSI), has been described. Results obtained, applying PSI, for a validation experiment and for the determination of RWA of a quasi-PP is presented. The PSI based technique does not suffer from any measurement ambiguities due to limitation in effective beam aperture. Hence the technique is suitable for high accuracy measurement of RWA of PP. In both the optical setups, presented in this paper, the respective interfering beams travel the same optical circuit and are thus subject to same perturbation in optical path, due to external mechanical vibration, which finally cancels out. Thus the measurements are much less affected by external vibrations. Since the respective interfering beams undergo identical reflections and transmissions, the visibility or contrast of the interference fringes is very good.     

Phase retrieval in two-wavelength DSSI using a combined filtering method

Phase retrieval in two-wavelength DSSI (digital speckle shearing interferometry) using a combined filtering method is proposed for small deformation derivative measurement. A simultaneous two-wavelength illumination and 3-CCD camera are employed in the experimental setup. The proposed method, which uses a two-wavelength technique does not require the conventional spatial phase unwrapping and has the advantage of good noise suppression for phase retrieval. Experimental results obtained show that using the proposed combined filtering method sensitivity similar to the single wavelength technique can be achieved.     

移相干涉技术中移相器的自校正方法

移相干涉技术（ＰＳＩ）是８０年代兴起的一门干涉图形自动识别技术，移相器作为移相干涉技术的关键部件其移相误差将直接影响到移相干涉技术的干涉图的识别精度。本文提出了一种移相器的自校正方法，即利用移相干涉仪的自身系统，通过快速傅里叶方法，对移相器进行逐步逼近校正。结合移相式红外干涉仪的研制，给出了一组移相器的自动校正的实验，实验表明，校正后的移相器的非线性误差可由原来的５％降低到０．２％。     

用双图全息相移干涉法计算与时间有关的位相分布

提出一种双图全息相移干涉法．该方法可以用来计算与时间有关的位相分布，两幅全息干涉条纹图可以同时得到，并且有固定的９０°位相差．虽然两幅条纹图的位相可以随着时间变化，如环境影响，或载荷变化，但他们之间的位相差恒定．该方法利用二维傅氏变换，结合偏振相移法以及分光技术．     

全光纤激光多普勒测速技术的研究

介绍一种全部采用普通单模光导纤维作为光路的激光多普勒测速系统.在该系统中采用普通单模光纤声光频率偏移装置实现被测流场速度方向的判别;以单模光纤偏振控制器控制光纤中激光偏振态,与常规激光多普勒测速系统相比,该系统结构简单,体积小、调整方便,而且测速探头具有极好的移动灵活性.     

Phase shifting SEM moiré method

A new phase shifting scanning electron microscope (SEM) moiré method is proposed in this paper. The phase shifting technique is realized in four steps from 0 to 2π by shifting electron beam in the y-axis direction controlled by the SEM system. It is successfully applied to determine the residual strain of a deformed holographic grating with a frequency of 1200 lines/mm in an electronic package. As a further application, it is used to measure the virtual strain of a MEMS structure with a 5000-line/mm grating and to determine the phase distribution of a SEM moiré formed with a 6000-line/mm grating fabricated by electron beam lithography. The experiments show the feasibility of this method. It provides a new way for disposal of fringes pattern in sub-micro moiré method.