CDFI鉴别男性乳腺良恶性肿瘤价值及与CXCL1、Gab2、MVD的相关性探究

本研究选取18例男性乳腺恶性肿瘤患者作为研究组,纳入同期41例男性良性乳腺肿瘤及50例健康体检男性分别作为良性对照组和健康对照组,通过对比分析发现,研究组CDFI参数[搏动指数(PI)、阻力指数(RI)、血流速度(PSV)]高于良性对照组和健康对照组(P＜O.05);PI、RI、PSV联合诊断男性乳腺恶性肿瘤的AUC高...     

Predicting ion selectivity in water purification by capacitive deionization: Electric double layer models

Ion-selective water treatment is needed to address emerging problems in an energy- and cost-efficient manner. Capacitive deionization (CDI) is a membraneless water treatment technology, which relies on storing ions in charged electric double layers (EDLs) of micropores. CDI has shown remarkable selectivity, with local density approximations (LDAs) showing some success in guiding selective separations. However, many underlying processes are represented by lumped fitting parameters in LDA models, hindering further progress. Atomistic models help unravel selectivity mechanisms, but are difficult to integrate with cell-level CDI theory. Here, we review and extend LDA models for CDI, highlight a knowledge gap in connecting between LDA and atomistic models for CDI, and emphasize and build upon analogies between micropore EDLs and nanofiltration membranes.     

沉积温度对Cu_2O薄膜生长过程及光电性能的影响(英文)

以硫酸铜为铜源,采用一步化学浴沉积法制备出了晶粒尺寸可调的纳米晶Cu2O薄膜。通过X射线衍射、扫描电镜和紫外可见分光光度法研究了沉积温度对薄膜晶体结构、成核密度、晶粒尺寸、薄膜厚度和光电性能的影响。结果表明,当在60~90℃范围内调节温度时,能够很好地控制晶粒尺寸、薄膜厚度,并将禁带宽度控制在33~51 nm、392~556 nm和2.47~2.61 eV范围内;随着晶粒尺寸的减小,紫外可见光谱的吸收边有明显的蓝移。此外还对薄膜的生长过程,成核密度和颗粒尺寸变化的机理进行了讨论。     

Cs的覆盖度对Cs/石墨烯的结构稳定性和场发射性能影响

采用密度泛函理论方法,对Cs以不同覆盖度吸附在石墨烯表面时系统的结构稳定性和场发射性能进行了研究。计算结果表明单原子Cs吸附在石墨烯表面的碳六元环的中心位置时系统的能量最低。随着Cs的覆盖度增加,碱金属Cs与石墨烯之间的吸附作用逐渐增强,(4×4)R 0°和(2×2)R 0°结构是稳定的。由于碱金属Cs的修饰作用,Cs/石墨烯体系的功函明显下降,且随着碱金属Cs的覆盖度增大,系统的功函逐渐减小。态密度的计算结果表明功函的下降主要与Cs和石墨烯之间的电子转移有关。随着覆盖度的增大,石墨烯的电子态逐渐向低能方向移动,系统的费米能级升高并导致材料的功函下降。     

Optimization of Hydrogen‐Evolving Photochemical Molecular Devices

A molecular photocatalyst consisting of a Ru^II photocenter, a tetrapyridophenazine bridging ligand, and a PtX₂ (X=Cl or I) moiety as the catalytic center functions as a stable system for light‐driven hydrogen production. The catalytic activity of this photochemical molecular device (PMD) is significantly enhanced by exchanging the terminal chlorides at the Pt center for iodide ligands. Ultrafast transient absorption spectroscopy shows that the intramolecular photophysics are not affected by this change. Additionally, the general catalytic behavior, that is, instant hydrogen formation, a constant turnover frequency, and stability are maintained. Unlike as observed for the Pd analogue, the presence of excess halide does not affect the hydrogen generation capacity of the PMD. The highly improved catalytic efficiency is explained by an increased electron density at the Pt catalytic center, this is confirmed by DFT studies.     

Solventless Formation of G‐Quartet Complexes Based on Alkali and Alkaline Earth Salts on Au(111)

Template cations have been extensively employed in the formation, stabilization and regulation of structural polymorphism of G‐quadruplex structures in vitro. However, the direct addition of salts onto solid surfaces, especially under ultra‐high‐vacuum (UHV) conditions, to explore the feasibility and universality of the formation of G‐quartet complexes in a solventless environment has not been reported. By combining UHV‐STM imaging and DFT calculations, we have shown that three different G‐quartet‐M (M: Na/K/Ca) complexes can be obtained on Au(111) using alkali and alkaline earth salts as reactants. We have also identified the driving forces (intra‐quartet hydrogen bonding and electrostatic ionic bonding) for the formation of these complexes and quantified the interactions involved. Our results demonstrate a novel route to fabricate G‐quartet‐related complexes on solid surfaces, providing an alternative feasible way to bring metal elements to surfaces for constructing metal–organic systems.     

The versatility of pentalene coordination to transition metals: a density functional theory investigation

DFT calculations with full geometry optimization have been carried out on a series of real and hypothetical compounds of the type [CpM(C8H6)], [(CO)3M(C8H6)], [M(C8H6)2], [(CpM)2(C8H6)], [[(CO)3M]2(C8H6)], and [M2(C8H6)2] (M = transition metal). The bonding in all the currently known compounds is rationalized, as well as in the (so far) hypothetical stable complexes. Depending on the electron count and the nature of the metal(s), eta2 (predicted), eta3, eta5, eta8, or intermediate coordination modes can be adopted. In the case of the mononuclear species, the most favored closed-shell electron counts are 18 and 16 metal valence electrons (MVE). In the case of the dinuclear species, an electron count of 34 MVEs is most favored. However, other electron counts can be stabilized, especially in the case of dinuclear complexes. Coordinated pentalene should most often be considered as formally being a dianion, but sometimes as a neutral ligand. In the former case it can behave as an aromatic species made of two equivalent fused rings, as a C5 aromatic ring connected to an allylic anion, or even as two allylic anions bridged by a C7=C8 double bond. In the latter case, it can behave as a bond-alternating cyclic polyene or as a C5 aromatic ring connected to an allylic cation.     

Novel properties from experimental charge densities: an application to the zwitterionic neurotransmitter taurine

The charge distribution of taurine (2-aminoethane-sulfonic acid) is revisited by using an orbital-based method that describes the density in a fixed molecular orbital basis with variable orbital occupation numbers. A new neutron data set is also employed to explore whether this improves the deconvolution of thermal motion and charge density. A range of molecular properties that are novel for experimentally determined charge densities are computed, including Weinhold population analysis, Mayer bond orders, and local kinetic energy densities, in addition to charge topological analysis and quantum theory of atoms-in-molecules (QTAIM) integrated properties. The ease with which a distributed multipole analysis can be performed on the fitted density matrix makes it straightforward to compute molecular moments, the lattice energy, and the electrostatic interaction energies of molecules removed from the crystal. Results are compared with high-level (QCISD) gas-phase calculations and band structure calculations employing density functional theory. Finally, the avenues available for extending the range of molecular properties that can be calculated from experimental charge densities still further using this approach are discussed.     

矿产品水分含量代表值Bootstrap模拟取样估计

在对矿产品水分含量基础统计学特征描述的基础上,采用内核密度估计对水分含量数据多态性进行了分析,根据双态分布的特点,使用Bootstrap模拟取样方法对试验样本值模拟重复取样,以多次Bootstrap模拟取样的均值与标准偏差作为矿产品水分含量有限样本代表值及标准偏差的稳健估计,实践证明Bootstrap模拟取样估计对矿产品水分含量代表值的估计是有效的,该项研究为矿产品水分含量代表值的准确评估提供了一种新方法.     

第一性原理研究MgZn2相的电子结构及磁性质

运用密度泛函理论的第一性原理计算分析了MgZn₂相的电子结构及相关磁性质。能带结构和态密度分析表明Zn4s和Zn4p轨道、Mg3s和Mg3p轨道分别发生sp态杂化,然后杂化态之间相互作用而形成Zn-Mg键;Mulliken布居分布计算显示:Zn₁-Mg(Zn₁是处于晶格边缘的Zn原子)和Zn₂-Mg(Zn₂是处于晶格内部的Zn原子)电子云重叠布居数接近0,电子密度分析显示Zn-Mg之间电子密度分布具有明显的定域性。结合上述结果与Zn、Mg原子的电负性差异,确定Zn-Mg键为极性共价键。分态密度(PDOS)分析显示,Zn₁-Mg键和Zn₂-Mg键的差异主要表现在Zn₂4s轨道在-10~-6 eV区域对成键的贡献度高于Zn₁4s轨道,而Zn₁4s轨道在2~5 eV区域对成键的贡献度高于Zn₂4s轨道。进一步对MgZn₂的积分自旋态密度和磁矩计算表明:MgZn₂磁性质表现为顺磁性,其磁性主要来源于Zn₁-Mg键中的2个自旋相同的未配对电子;MgZn₂的顺磁性特性将使Al-Zn-Mg-Cu(7xxx系)高强铝合金产生磁致塑性效应。