Single‐crystalline gold microplates grown on substrates by solution‐phase synthesis

Chemically synthesized single‐crystalline gold microplates have been attracting increasing interest because of their potential as high‐quality gold films for nanotechnology. We present the growth of tens of nanometers thick and tens of micrometers large single‐crystalline gold plates directly on solid substrates by solution‐phase synthesis. Compared to microplates deposited on substrates from dispersion phase, substrate‐grown plates exhibit significantly higher quality by avoiding severe small‐particle contamination and aggregation. Substrate‐grown gold plates also open new perspectives to study the growth mechanism via step‐growth and observation cycles of a large number of individual plates. Growth models are proposed to interpret the evolution of thickness, area and shape of the plates. It is found that the plate surface remains smooth after regrowth, implying the applicability of regrowth for producing giant plates as well as unique single‐crystalline nano‐structures.     

镍钛记忆合金自补偿磨粒磨损性能研究

研究了高临界温度镍钛记忆合金一维自补偿磨粒磨损特性.结果表明,在一定温度下,镍钛记忆合金在摩擦过程中具有形状恢复能力,从而产生一维磨损自补偿作用.超弹状态镍钛记忆合金具有热弹性马氏体相变、高阻尼、应力感生马氏体、超弹性、高应变硬化指数和时效弥散析出强化等特性,这使得硬度较低的镍钛合金的耐磨性能远优于硬度较高的淬火45#钢.利用超弹状态镍钛记忆合金的磨损自补偿作用可望开发出新型抗磨形状记忆合金产品.     

Geometric Hermite interpolation by spatial Pythagorean-hodograph cubics

It is shown that, depending upon the orientation of the end tangents t₀,t₁ relative to the end point displacement vector p=p₁–p₀, the problem of G¹ Hermite interpolation by PH cubic segments may admit zero, one, or two distinct solutions. For cases where two interpolants exist, the bending energy may be used to select among them. In cases where no solution exists, we determine the minimal adjustment of one end tangent that permits a spatial PH cubic Hermite interpolant. The problem of assigning tangents to a sequence of points p₀,...,p_n in R³, compatible with a G¹ piecewise-PH-cubic spline interpolating those points, is also briefly addressed. The performance of these methods, in terms of overall smoothness and shape-preservation properties of the resulting curves, is illustrated by a selection of computed examples.     

基于OTDR和SMA原理的分布温度阈值执行器的设计

温度阈值执行器的设计是准分布光纤温度报警系统对温度报警空间定位的关键.本文分析了基于OTDR和SMA设计温度阈值执行器的原理,提出了执行器的物理模型.通过实验测试,从SMA弹簧样品中选出了满足执行器技术要求的记忆弹簧,完成了执行器的机械设计.系统运行表明:执行器能有效运作,能够实现准分布温度报警,并且系统具有接近1.5 m的空间分辨率和低于16 s的响应时间等优良的性能参数.     

超声波波型转换与表面波的检测

分析了超声波纵波、横波、表面波3种波型的产生条件和声速关系,检测了超声波在固体表面的波型转换,并测量了声表面波的速度,讨论了声表面波在超声延迟线方面的应用.     

Neural network applied to reconstruction of complex objects based on fringe projection

The neural network has been introduced into the reconstruction of the complex object based on fringe projection. In this method, the neural network with powerful property of approximation is used to get the continuous approximate function of a discrete fringe pattern captured by an image frame grabber. The depth-related phase of the measured object modulated into the fringe pattern can be demodulated by dealing with the approximate function. Compared with the Fourier transform profilometry (FTP), in the network method, one deformed fringe pattern is needed to reconstruct the tested object, and a high spatial resolution is maintained for no filtering process. Therefore, this method performs better than FTP in the measurement of the complex object. Moreover, the network method is capable of demodulating more depth-related phase even in the case that the local shadow exists in the fringe pattern. Computer simulations and experiments validate the feasibility of this method.     

Modal attenuation in metal-clad graded-index slab optical waveguides

The paper presents the influence of refractive profile shape on the distribution of modal attenuation in planar metal-clad optical waveguide structures. A calculation method has been presented in which we applied the Snyder–Love expression on modal attenuation coefficients and matrix method 4 × 4 for the analysis of planar waveguides. The obtained results are almost identical with the exact results for refractive profiles: the parabolic, exponential, Gaussian and linear ones. It has been demonstrated that the applied calculation method can be used in waveguides of any profiles of the refractive index.     

Ag implantation-induced modification of Ni–Ti shape memory alloy thin films

Nanocrystalline thin films of Ni–Ti shape memory alloy are deposited on an Si substrate by the DC-magnetron co-sputtering technique and 120?keV Ag ions are implanted at different fluences. The thickness and composition of the pristine films are determined by Rutherford Backscattering Spectrometry (RBS). X-Ray diffraction (XRD), atomic force microscopy (AFM) and four-point probe resistivity methods have been used to study the structural, morphological and electrical transport properties. XRD analysis has revealed the existence of martensitic and austenite phases in the pristine film and also evidenced the structural changes in Ag-implanted Ni–Ti films at different fluences. AFM studies have revealed that surface roughness and grain size of Ni–Ti films have decreased with an increase in ion fluence. The modifications in the mechanical behaviour of implanted Ni–Ti films w.r.t pristine film is determined by using a Nano-indentation tester at room temperature. Higher hardness and the ratio of higher hardness (H) to elastic modulus (E_r) are observed for the film implanted at an optimized fluence of 9?×?10¹⁵ ions/cm². This improvement in mechanical behaviour could be understood in terms of grain refinement and dislocation induced by the Ag ion implantation in the Ni–Ti thin films.     

A novel fringe adaptation method for digital projector

Aimed to obtain high-quality sinusoidal fringe projection, a new method to correct the output fringe of digital projector is presented. The method is based on the proposed fringe transform model, which describes the relationship of the input and output fringe pattern. Firstly, a series of fringe patterns are projected and from the fringe images, the transform function is calculated by the pattern shifting method. At last, by modifying the input fringe pattern, a standard sinusoidal output fringe can be achieved. Different from the previous methods, the waveform nonlinearity is estimated by varying the intensity of the projected fringe pixel by pixel; thus the waveform nonlinearity can be estimated precisely and the time cost is considerably reduced. Experimental results show that by modification of the input projection patterns the projector can project fringe with high-quality sinusoidal waveform leading to high performance of the projection system.