电源电路抗γ总剂量辐射性能建模与裕量与不确定性量化评估

针对电源电路抗总剂量辐射性能评估问题,建立了元器件和电路的性能模型,并搭建测试电路对模型进行了测试。开展了辐照敏感关键元器件的总剂量辐照试验,获取了元器件关键参数随累积总剂量变化的实验数据,将参数变化规律注入模型,开展了电源电路抗辐射性能仿真,获得了电路关键特征参数输出电压随累积总剂量的变化规律。采用裕量与不确定性量化(QMU)方法对电源电路的抗辐射性能进行评估,并与电路实际辐照实验结果进行对比,结果表明,QMU评估结果与实际实验结果保持了较好的一致性。     

基于PSpice的半导体激光高频调制系统设计

为了实现高频率的调制激光输出,设计了一种驱动系统由信号放大、电流调制、过流保护和具有慢启动功能的直流偏置电路高度集成的半导体激光高频调制系统。此系统采用了结构简单的直接调制方式,运用线性调频的高频信号去控制半导体激光器发射激光的强度,从而实现高频调制。在运用OrCAD/PSpice对高频调制驱动系统进行模拟仿真的基础上,最终研制出的半导体激光高频调制系统实现了频率为40.02 MHz、直流偏置为493.326 mA、正弦波调制电流峰峰值为850 mA的高频调制输出,调制激光平均功率为300 mW。     

Near-field characteristics of highly non-paraxial subwavelength optical fields with hybrid states of polarization

The vectorial structure of an optical field with hybrid states of polarization(So P) in the near-field is studied by using the angular spectrum method of an electromagnetic beam. Physical images of the longitudinal components of evanescent waves are illustrated and compared with those of the transverse components from the vectorial structure. Our results indicate that the relative weight integrated over the transverse plane of the evanescent wave depends strongly on the number of the polarization topological charges. The shapes of the intensity profiles of the longitudinal components are different from those of the transverse components, and it can be manipulated by changing the initial So P of the field cross-section. The longitudinal component of evanescent wave dominates the near-field region. In addition, it also leads to three-dimensional shape variations of the optical field and the optical spin angular momentum flux density distributions.     

Anomalous behavior and phase transformation of α-GaOOH nanocrystals under static compression

The structural compression mechanism and compressibility of gallium oxyhydroxide, α-GaOOH, are investigated by in situ synchrotron radiation x-ray diffraction at pressures up to 31.0 GPa by using the diamond anvil cell technique. Theα-GaOOH sustains its orthorhombic structure when the pressure is lower than 23.8 GPa. The compression is anisotropic under hydrostatic conditions, with the a-axis being most compressible. The compression proceeds mainly by shrinkage of the void channels formed by the coordination GaO_3(OH)_3 octahedra of the crystal structure. Anomaly is found in the compression behavior to occur at 14.6GPa, which is concomitant with the equatorial distortion of the GaO_3(OH)_3 octahedra. A kink occurs at 14.6 GPa in the plot of finite strain f versus normalized stress F, indicating the change in the bulk compression behavior. The fittings of a second order Birch–Murnaghan equation of state to the P–V data in different pressure ranges result in the bulk moduli B_0= 199(1) GPa for P 14.6 GPa and B_0= 167(2) GPa for P 14.6 GPa. As the pressure is increased to about 25.8 GPa, a first-order phase transformation takes place, which is evidenced by the abrupt decrease in the unit cell volume and b and c lattice parameters.     

Performance optimization for quantum key distribution in lossy channel using entangled photons

In quantum key distribution(QKD), the times of arrival of single photons are important for the keys extraction and time synchronization. The time-of-arrival(TOA) accuracy can affect the quantum bit error rate(QBER) and the final key rate. To achieve a higher accuracy and a better QKD performance, different from designing more complicated hardware circuits, we present a scheme that uses the mean TOA of M frequency-entangled photons to replace the TOA of a single photon. Moreover, to address the problem that the entanglement property is usually sensitive to the photon loss in practice,we further propose two schemes, which adopt partially entangled photons and grouping-entangled photons, respectively.In addition, we compare the effects of these three alternative schemes on the QKD performance and discuss the selection strategy for the optimal scheme in detail. The simulation results show that the proposed schemes can improve the QKD performance compared to the conventional single-photon scheme obviously, which demonstrate the effectiveness of the proposed schemes.     

改进的PNJL模型下QCD的相图

Polyakov-Nambu-Jona-Lasinio（PNJL）模型是研究强相互作用物质性质的使用最为广泛的有效模型之一。在PNJL模型的基础上考虑了手征凝聚和Polyakov圈之间的纠缠作用,并且引入了化学势修正的Polyakov有效势,由此得到了化学势依赖的entangled PNJL（μEPNJL）模型。在平均场框架下的计算结果表明:相较于原始的PNJL模型,由μEPNJL模型计算得到的临界点（CEP）朝着温度更高、化学势更小处移动,并且手征对称性恢复相变和退禁闭相变在较大的化学势范围内都重合得很好。通过与STAR合作组在相对论重离子对撞机（RHIC）上进行的净质子数分布的测量结果相比,可以发现,通过适当的参数调节,由μEPNJL模型计算得到的CEP更加靠近实验预言的CEP可能存在的区域。Polyakov-Nambu-Jona-Lasinio (PNJL) model is one of the most popular effective quark models to investigate the properties of strongly interacting matter. Based on the PNJL model, we consider the entanglement interactions between the chiral condensate and Polyakov-loop, as well as the chemical potential modification of Polyakov-loop potential simultaneously, which is named μEPNJL model. Compared with the original PNJL model, the calculations in the mean field approximation show that the critical end point (CEP) given in the μEPNJL model moves towards higher temperature and smaller chemical potential in the T-μ phase diagram. Besides, the chiral symmetry restoration and deconfinement phase transition coincide well in a wide range of chemical potential. Comparing our calculations with the measurement of the moments of net-proton multiplicity distributions at Relativistic Heavy-Ion Collider (RHIC) by STAR Collaboration, we find that the CEP given by μEPNJL model can be closer to the range predicted by the experiment through appropriate parameter adjustment.     

石墨富集结合空间约束水体重金属LIBS检测方法研究

针对水体重金属污染检测的需求,研究了以高纯石墨片为水体富集基底,样品多次富集结合等离子体空间约束的水体重金属LIBS检测方法, 并对Pb,Cu,Cd,Ni等不同重金属元素的测量稳定性及检测限进行了分析。实验采用波长为1 064 nm的Nd∶YAG调Q激光器,分辨率为0.1 nm的光纤光谱仪分别对上述水体中重金属元素含量的特征光谱进行分光探测。结果表明,样品多次富集结合空间约束方法能够有效地提高水体重金属检测的灵敏度及稳定性并降低元素检测限,空间约束条件下特征光谱强度增强约2.5倍,光谱稳定性也得到提高,相对标准偏差由非约束情况下的11.34%降低至8.77%。对不同浓度的Pb,Cu,Cd,Ni四种重金属元素进行检测并建立定标曲线,Pb,Cu,Cd,Ni的检测限均低于国家工业废水排放标准的1/6,满足工业废水重金属的检测需求,为工业废水重金属的减排控制与超标排放预警监测提供了一种有效方法和技术支持。     

QCD equation of state for heavy ion collisions

In this work, we calculate the equation of state(EoS) of quark gluon-plasma(QGP) using the CornwallJackiw-Tomboulis(CJT) effective action. We get the quark propagator by using the rank-1 separable model within the framework of the Dyson-Schwinger equations(DSEs). The results from CJT effective action are compared with lattice QCD data. We find that, when μ is small, our results generally fit the lattice QCD data when TT_c,but show deviations at and below T_c. It can be concluded that the EoS of CJT is reliable when TT_c. Then,by adopting the hydrodynamic code UVH2+1, we compare the CJT results of the multiplicity and elliptic flow v2 with the PHENIX data and the results from the original EoS in UVH2+1. While the CJT results of multiplicities generally match the original UVH2+1 results and fit the experimental data, the CJT results of v2 are slightly larger than the original UVH2+1 results for centralities smaller than 40% and smaller than the original UVH2+1 results for higher centralities.     

Theoretical simulation and analysis of large size BMP-LSC by 3D Monte Carlo ray tracing model

Luminescent solar concentrators(LSC) can reduce the area of solar cells by collecting light from a large area and concentrating the captured light onto relatively small area photovoltaic(PV) cells, and thereby reducing the cost of PV electricity generation. LSCs with bottom-facing cells(BMP-LSC) can collect both direct light and indirect light, so further improving the efficiency of the PV cells. However, it is hard to analyze the effect of each parameter by experiment because there are too many parameters involved in the BMP-LSC. In this paper, all the physical processes of the light transmission and collection in the BMP-LSC were analyzed. A three-dimensional Monte Carlo ray tracing program was developed to study the transmission of photons in the LSC. A larger-size LSC was simulated, and the effects of dye concentration, the LSC thickness, the cell area, and the cell distance were systematically analyzed.     

Experimental design to measure the anchoring energy on substrate surface by using the alternating-current bridge

The anchoring property of the substrate surface of liquid crystal cells plays an important role in display and nondisplay fields. This property directly affects the deformation of liquid crystal molecules to change the phase difference through liquid crystal cells. In this paper, a test method based on the alternating-current bridge is proposed to determine the capacitance of liquid crystal cells and thus measure the anchoring energy of the substrate surface. The anchoring energy can be obtained by comparing the capacitance–voltage curves of twisted nematic liquid crystal cells with different anchoring properties in experimental and theoretical results simulated on the basis of Frank elastic theory. Compared with the other methods to determine the anchoring energy, our proposed method requires a simple treatment of liquid crystal cells and allows easy and high-accuracy measurements, thereby expanding the test ideas on the performance parameters of liquid crystal devices.