Particle Size Analysis by Transmission Fluctuation Spectrometry: Experimental Results Obtained with a Gaussian Beam and Analog Signal Processing

Transmission fluctuation spectrometry (TFS) is a method for the analysis of particle size distributions based on the statistical fluctuations of a transmission signal. Complete information on the PSD and particle concentration can be retrieved by a special transformation of the transmission signal, whereby the expectancy of the transmission square (ETS) is determined after the signal has been subjected to a procedure of spatial and temporal averaging. By varying the averaging parameters over a wide range, a spectrum of ETSs is obtained and introduced into a linear equation system, which yields the PSD. In the experimental realization presented here, variable temporal averaging is realized in the frequency domain with a series of low pass filters at different cutoff frequencies while spatial averaging inevitably occurs as the particles pass through a focused Gaussian beam of finite cross section. Experimental results on spherical particles (glass beads) and non‐spherical particles (SiC) are presented. The PSDs are resolved in 30 intervals within a particle size range from 1–1000 μm, employing a modified Chahine inversion algorithm. So far, the measurements are limited to moderate particle concentrations. Some influences affecting the measurements, especially for higher particle concentrations, are discussed in detail.     

A two dimensional, experimental study on the evolution of the detachment and its time-behavior in filled rubber

Summary The detachment of a rubber matrix from a rigid inclusion under monotonic loading and at subsequent relaxation is investigated within two dimensional analysis. Examined are stress–strain experimental data acquired with the help of a test bed equipped with a digital image-acquisition device. The influence of the interfacial bonding strength and the particle size on the detachment process is analyzed. The influence of the interfacial bonding strength is visible in the stress–strain diagram of loading and in the recorded images. The relaxation test reveals no influence of the bonding strength on the stress-relaxation. However, the image analysis indicates a secondary transient creep of the contour of detachment, which depends on the interfacial bonding.     

Symmetry specified enumeration of substituted derivatives: an easy solution to the complex problem

Several sophisticated methods to solution of symmetry specified enumeration problems are available in the modern literature. In this paper we propose a simple technique that allows one to manually compute the exact numbers of fixed-symmetry derivatives for a given structure either with inclusion or ignoring the substitution patterns. The basic idea of the method suggested consists in the derivation of Pólya-like cycle indices for the automorphism groups of specially constructed orbit partition graphs; the expansion of these indices and subsequent simple calculations result in the desired numbers of substituted derivatives with achiral substituents. Limitations of the new technique (and a method suggested earlier) depend on the relevance of the orbit partitions for particular subgroups of the point symmetry group. For illustration purposes, the results obtained for the prismane (D _3h ) and adamantane (T _d ) structures are discussed. In the former case the numbers of substituted derivatives can be found for all subgroups of the D _3h group, whereas in the latter case these numbers can be determined for eight out of eleven subgroups of the T _d point symmetry group. This work is based on the text of the lecture presented by the authors at the 5th All-Russia Conference on Molecular Modeling (Moscow, April 2007). The paper deals with the methodology and detailed treatment of applied aspects related to solution of enumeration problems for substituted derivatives with prescribed symmetry groups. Unlike the known methods of symmetry specified enumeration, the technique suggested is simple enough and may be regarded as generalization of the Pólya methodology, which is widely used by chemists. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 227–245, February, 2008.     

Effect of the incomplete accommodation of the heterogeneous recombination energy on heat fluxes to a quartz surface

Taking both the heterogeneous catalytic processes, including the surface formation of particles with excited internal degrees of freedom, and the processes of multicomponent diffusion and heat transfer in the MESOX apparatus fully into account makes it possible to obtain a recombination coefficient and an accommodation coefficient of the oxygen-atoms-on-quartz recombination energy which are in good agreement with the experimental data. The heterogeneous catalysis model constructed can be used effectively for predicting the heat fluxes to the surface of reentry vehicles on their entry into the Earth’s atmosphere.     

Synthesis and characterization of wholly aromatic poly(azomethine)s containing donor–acceptor triphenylamine moieties

N‐(4‐nitrophenyl)‐4′,4″‐bisformyl‐diphenylamine was synthesized from N‐(4‐nitrophenyl)‐diphenylamine by the Vilsmeier‐Haack reaction. Soluble aromatic poly(azomethine)s (PAMs) were prepared by the solution polycondensation of N‐(4‐nitrophenyl)‐4′,4″‐bisformyl‐diphenylamine and aromatic diamine in N‐methyl‐2‐pyrrolidone (NMP) at room temperature under reduced pressure. All the PAMs are highly soluble in various organic solvents, such as N,N‐dimethylacetamide (DMAc), chloroform (CHCl₃), and tetrahydrofuran (THF). Differential scanning calorimetry (DSC) indicated that these PAMs had glass‐transition temperatures (T_gs) in the range of 170–230 °C, and a 10% weight‐loss temperatures in excess of 490 °C with char yield at 800 °C in nitrogen higher than 60%. These PAMs in NMP solution showed UV‐Vis charge‐transfer (CT) absorption at 405–421 nm and photoluminescence peaks around 462–466 nm with fluorescence quantum efficiency (Φ_F) 0.10–0.99%. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of these PAMs can be determined from cyclic voltammograms as 4.86–5.43 and 3.31–3.34 eV, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4921–4932, 2007     

Modification of multiwalled carbon nanotubes by carboxy groups and determination of the degree of functionalization

Multiwalled carbon nanotubes were modified by carboxy groups. Four independent methods for the determination of the degree of functionalization of the surface were proposed: ¹³C NMR spectroscopy, thermogravimetry, titrimetry, and fluorimetry. The first two methods show the total content of carboxy groups in the sample, and the latter two methods give information about the content of the surface groups only. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 291–295, February, 2008.     

宁波城市设计的若干思考与建议

通过探讨城市设计概念的形成过程和历史积淀，阐明其在城市建设中的意义，并运用城市设计的理论与分析方法，针对目前宁波城市大规模的规划、设计、改造现象，提出若干思考与建议．     

Rough隶属函数关于集合并与交的一种高精度计算方法

近些年来，许多处理近似问题的方法陆续被提出，其中利用Rough集理论计算两个集合的并和交的Rough隶属函数方法是被用较多的一种方法，但毕竟该方法精度较差。为此，介绍了一种精度较高的计算两个集合的并和交的Rough隶属函数方法，它克服了前者利用Rough集理论计算Rough隶属函数的复杂性，而迎来了简单和高精度的特点。     

Maximal σ‐polynomials of connected 3‐chromatic graphs

In the set of graphs of order n and chromatic number k the following partial order relation is defined. One says that a graph G is less than a graph H if c_i(G) ≤ c_i(H) holds for every i, k ≤ i ≤ n and at least one inequality is strict, where c_i(G) denotes the number of i‐color partitions of G. In this paper the first ? n/2 ? levels of the diagram of the partially ordered set of connected 3‐chromatic graphs of order n are described. © 2003 Wiley Periodicals, Inc. J Graph Theory 43: 210–222, 2003     

A new VOF‐based numerical scheme for the simulation of fluid flow with free surface. Part II: application to the cavity filling and sloshing problems

Finite element analysis of fluid flow with moving free surface has been performed in 2‐D and 3‐D. The new VOF‐based numerical algorithm that has been proposed by the present authors (Int. J. Numer. Meth. Fluids, submitted) was applied to several 2‐D and 3‐D free surface flow problems. The proposed free surface tracking scheme is based on two numerical tools; the orientation vector to represent the free surface orientation in each cell and the baby‐cell to determine the fluid volume flux at each cell boundary. The proposed numerical algorithm has been applied to 2‐D and 3‐D cavity filling and sloshing problems in order to demonstrate the versatility and effectiveness of the scheme. The proposed numerical algorithm resolved successfully the free surfaces interacting with each other. The simulated results demonstrated applicability of the proposed numerical algorithm to the practical problems of large free surface motion. It has been also demonstrated that the proposed free surface tracking scheme can be easily implemented in any irregular non‐uniform grid systems and can be extended to 3‐D free surface flow problems without additional efforts. Copyright © 2003 John Wiley & Sons, Ltd.