Fermentation characteristics and the dynamic trend of chemical components during fermentation of Massa Medicata Fermentata

As a representative of traditionally fermented Chinese medicine, Massa Medicata Fermentata (MMF) shows the functions of invigorating the spleen and stomach and promoting digestion, which plays an important role in the treatment of gastrointestinal diseases. The fermentation mechanism and the key factors that affect the quality of MMF have not been revealed yet, which has become an urgent issue that limits its clinical application. This article aims to systematically and comprehensively reveal the transformation of physical properties and the dynamic trend of chemical components including substrate components, volatile components, and lactic acid as anaerobic fermentation product during MMF fermentation. Along with obvious hyphae growth observed for MMF, the weight of MMF decreased, and the moisture and temperature increased. Through the quantified 14 components from substrate, ferulic acid increased from 45.53 ± 6.94 to 141.89 ± 78.40 μg/g, while glycosides and phenolic acids declined except caffeic acid. Also, within the 66 volatile components analyzed, alcohols and acids increased, while aldehydes and ketones decreased. Lactic acid was not detected in the fermentation substrate, but an apparent increase in lactic acid content was observed along with the increased fermentation days, resulting in 2.54 ± 0.15 mg/g on day 8. Based on the tested components, the fermentation process of MMF was discriminated into three distinct stages by principal component analysis, and an optimal fermentation time of four days was proposed. The results of this study will be of great significance to clarify the characteristics of fermentation and conduce to improving quality standards of MMF.     

空间机器人组装超大型结构的动力学分析北大核心CSCD

超大型航天结构具有超大柔性、超低固有频率的特点,空间机器人在轨组装时应尽可能避免激起超大型结构的柔性振动.空间机器人组装超大型结构模块的过程分成抓捕阶段、位姿调整与稳定阶段、安装阶段和爬行阶段.通过对安装阶段的动力学与控制研究,提出共线安装的轨迹规划方法,有效避免了柔性结构振动.首先,采用自然坐标法和绝对节点坐标法建立主结构-空间机器人-待组装结构的在轨组装系统动力学模型.然后,将共线安装的要求转化为空间机器人的轨迹规划约束,要求空间机器人质心到主结构/待组装结构的距离保持不变,实现共线安装的轨迹规划.数值仿真表明:提出的组装方法在组装过程中可有效避免超大型结构的横向运动,降低夹持力矩.最后,分析了系统参数对组装过程动力学响应的影响,为超大型航天器的在轨组装提供了参考.     

“限时服务规则”下的复线船闸多目标调度优化

针对现有船舶过闸排队规则的欠缺,基于“限时服务规则”,构建复线船闸多目标双层优化调度模型:上层模型用于获得两个闸室安全区域的船舶排布可行方案;下层模型用于获得不同船舶排布可行方案的优化闸次数。下层模型分两个阶段完成:对符合“限时服务规则”的船舶,构建以闸次最少为目标的0-1规划模型,获得此类船舶安排的闸次;对其余船舶按照“先到先服务规则”,构建以闸次最少、闸室利用率最大为目标的多目标决策模型,获得不同船舶排布可行方案应该安排的频次。以位于江苏省干线航道上的某复线船闸某日24小时内过闸船舶的数据为例,计算结果表明:采用本文优化模型获得的优化方案与“经验编排方式”相比,两座船闸各节约2个闸次,两个船闸的平均闸室利用率分别提高了3.66和4.72个百分点。     

市场化改革背景下养老机构服务供给博弈研究

考虑政府补贴、市场化程度、养老机构服务成本、老年人偏好等因素,构建了完全国有化、公私并存的半市场化和完全市场化三种情形下公办和民办养老机构之间的两阶段博弈模型,比较分析了市场化程度对养老机构服务价格制定和服务水平选择的影响,实证讨论了各参数变化对养老机构收益及社会福利的影响。研究表明:完全市场化机制会降低养老机构服务质量,完全国有化机制会陷入社会福利陷阱,探索公私并存的最佳市场化水平才能更好地提高社会福利;适度推进市场化改革,提高养老机构服务水平,降低民办养老机构服务成本,适度提高对民办养老机构的补贴,将有效缓解公办和民办养老机构的不公平竞争;提高老年人支付能力,推进养老机构供给侧结构性改革,将保障机构养老服务的有效供给,促进养老服务业的健康有序发展。     

The regioselectivity of the formation of 2-pyrazolylthiazoles and their precursors from the reaction of 2-hydrazinothiazoles with 4,4,4-trifluoro-1-hetaryl-1,3-butanediones

Reaction of 2-hydrazinothiazoles 1 with 1-thienyl- and 1-furyl-1,3-butanediones 2a,b in methanol in the presence of hydrochloric acid mainly leads to a mixture of pyrazoles 3 and pyrazolines 4 or pyrazoles 3 and 5 in strong acidic conditions. Isomeric hydrazones 6 and pyrazolines 4 were formed and isolated in these reactions in the absence of hydrochloric acid. It has been shown that the regioselectivity in the reaction of diketones 2 with hydrazine 1 is governed by both the concentration of acid and the nature of substituents in the 1,3-diketones 2. Cyclization of hydrazones 6 is shown to occur under milder conditions than dehydration for pyrazolines 4. The new heterocyclic compounds were prepared and fully characterized by NMR spectra and by X-ray analysis for 3c.     

Catalytic Active Site for NO Decomposition Elucidated by Surface Science and Real Catalyst

Comprehensive studies combining surface science and real catalyst were performed to get further insight into catalytic active site and reaction mechanism for NO decomposition over supported palladium and cobalt oxide-based catalysts. On palladium single-crystal model catalysts, adsorption, dissociation and desorption behavior of NO was found to be closely related to the surface structures, the stepped surface palladium being active for dissociation of NO. In accordance with this result, the activity of powder Pd/Al₂O₃ catalysts for NO decomposition was directly related to the number of step sites exposed on the surface, suggesting that the step sites act as the catalytic active site for NO decomposition on Pd/Al₂O₃. NO decomposition over cobalt oxide was found to be significantly promoted by addition of alkali metals. Surface science study and catalyst characterization led to the same conclusion that the interface between the alkali metal and Co₃O₄ serves as the catalytic active site. From the results of in situ Fourier transform infrared (FT-IR) spectroscopy and isotopic transient kinetic analysis, a reaction mechanism was proposed in which the reaction is initiated by NO adsorption onto alkali metals to form NO₂⁻ species and then NO₂⁻ species react with the adsorbed NO species to form N₂ over the interface between the alkali metal and Co₃O₄.     

Thermotropic Liquid Crystals Based on Extended 2,5‐Disubstituted‐1,3,4‐Oxadiazoles: Structure–Property Relationships,Variable‐Temperature Powder X‐ray Diffraction,and Small‐Angle X‐ray Scattering Studies

A class of extended 2,5‐disubstituted‐1,3,4‐oxadiazoles R¹‐C₆H₄‐{OC₂N₂}‐C₆H₄‐R² (R¹=R²=C₁₀H₂₁O 1 a , p‐C₁₀H₂₁O‐C₆H₄‐C?C 3 a , p‐CH₃O‐C₆H₄‐C?C 3 b ; R¹=C₁₀H₂₁O, R²=CH₃O 1 b , (CH₃)₂N 1 c ; F 1 d ; R¹=C₁₀H₂₁O‐C₆H₄‐C?C, R²=C₁₀H₂₁O 2 a , CH₃O 2 b , (CH₃)₂N 2 c , F 2 d ) were prepared, and their liquid‐crystalline properties were examined. In CH₂Cl₂ solution, these compounds displayed a room‐temperature emission with λ_max at 340–471 nm and quantum yields of 0.73–0.97. Compounds 1 d , 2 a – 2 d , and 3 a exhibited various thermotropic mesophases (monotropic, enantiotropic nematic/smectic), which were examined by polarized‐light optical microscopy and differential scanning calorimetry. Structure determination by a direct‐space approach using simulated annealing or parallel tempering of the powder X‐ray diffraction data revealed distinctive crystal‐packing arrangements for mesogenic molecules 2 b and 3 a , leading to different nematic mesophase behavior, with 2 b being monotropic and 3 a enantiotropic in the narrow temperature range of 200–210 °C. The structural transitions associated with these crystalline solids and their mesophases were studied by variable‐temperature X‐ray diffractometry. Nondestructive phase transitions (crystal‐to‐crystal, crystal‐to‐mesophase, mesophase‐to‐liquid) were observed in the diffractograms of 1 b, 1 d , 2 b, 2 d , and 3 a measured at 25–200 °C. Powder X‐ray diffraction and small‐angle X‐ray scattering data revealed that the structure of the annealed solid residue 2 b reverted to its original crystal/molecular packing when the isotropic liquid was cooled to room temperature. Structure–property relationships within these mesomorphic solids are discussed in the context of their molecular structures and intermolecular interactions.