Hysteresis and imperfection sensitivity in small ferromagnetic particles

The classical results of Stoner and Wohlfarth for the prediction of hysteresis loops in small ferromagnetic particles are extended to specimens of non-ellipsoidal shape, and shown to be a consequence of micromagnetics. The insensitivity to surface roughness is proposed as a possible explanation of the high coercivity behavior of small particles.

---

Sommario Si deducono i classici risultati di Stoner e Wohlfarth dalla teoria del micromagnetismo, e si dimostra la loro validità per la previsione di cicli di isteresi magnetica anche per particelle di forma non ellissoidale. Viene proposta, quale possibile spiegazione della notevole ampiezza dei cicli di isteresi caratteristici di particelle di piccole dimensioni, l'indifferenza alla presenza di rugosità superficiale.

     

计算机模拟升降法试验的研究

介绍了计算机模拟感度试验的原理，运用计算机模拟方法研究了升降法试验的初始参数选择对感度分布参数估计精度的影响，取得了对升降法有利的试验条件。     

Global stability analysis of a 90°-bend pipe flow

The present work investigates the stability properties of the flow in a 90°-bend pipe with curvature $\delta =R/R_c=1/3$, with R being the radius of the cross-section of the pipe and $R_c$ the radius of curvature at the pipe centreline. Direct numerical simulations (DNS) for values of the bulk Reynolds number ${\mathit{Re}}_b=U_{b}D/\nu$ between 2000 and 3000 are performed. The bulk Reynolds number is based on the bulk velocity $U_b$, the pipe diameter D, and the kinematic viscosity $\nu$. The flow is found to be steady for ${\mathit{Re}}_b⩽2500$, with two main pairs of symmetric, counter-rotating vortices in the section of the pipe downstream of the bend. The presence of two recirculation regions is detected inside the bend: one on the outer wall and the other on the inner side. For ${\mathit{Re}}_b⩾2550$, the flow exhibits a periodic behaviour, oscillating with a fundamental non-dimensional frequency $\mathit{St}=\mathit{fD}/U_b=0.23$. A global stability analysis is performed in order to determine the cause of the transition from the steady to the periodic regime. The spectrum of the linearised Navier-Stokes operator reveals a pair of complex conjugate eigenvalues with positive real part, hence the transition is ascribed to a Hopf bifurcation occurring at ${\mathit{Re}}_{b,\mathit{cr}}\approx 2531$, a value much lower than the critical Reynolds number for the flow in a torus with the same curvature. The velocity components of the unstable direct and adjoint eigenmodes are investigated, and they display a large spatial separation, most likely due to the non-normality of the linearised Navier-Stokes operator. Thus, the core of the instability, also known in the literature as the wavemaker, is sought performing an analysis of the structural sensitivity of the unstable eigenmode to spatially localised feedbacks. The region located 15° downstream of the bend inlet, on the outer wall, is the most receptive to this kind of perturbations, and thus corresponds to where the instability originates. Since this region coincides with the outer-wall separation bubble, it is concluded that the instability is linked to the strong shear by the backflow phenomena. The present results are relevant for technical applications where bent pipes are frequently used, and their stability properties have hitherto not been studied.     

A quasi-flow constitutive model with strain-rate dependence

In this paper, the proposed is a quasi-flow constitutive model with strain-rate sensitivity for elastic plastic large deformation. The model is based on the Quasi-flow Corner theory, and is suitable for the sheet metal forming process simulation with a variable punch machine velocity. Uniaxial tensile tests and deep-drawing tests of a circular blank with square punch are carried out and numerically simulated. The consistency between the experimental and the numerically simulated results shows the validity of the present new constitutive model. The project supported by the Scientific Foundation of National Outstanding Youth of China (10125208), the National Natural Science Foundation of China (19832020), and the National Education Committee of China     

Temperature sensing using the spectral interference of polarization modes in a highly birefringent fiber

The spectral interference of polarization modes in a highly birefringent (HB) fiber to measure temperature is analyzed theoretically and experimentally. A tandem configuration of a birefringent delay line and a sensing HB fiber is considered and the spectral interferograms are modelled for the known birefringence dispersion of the HB fiber under test. As the delay line, a birefringent quartz crystal of a suitable thickness is employed to resolve a channeled spectrum. The channeled spectra are recorded for different temperatures and the polarimetric sensitivity to temperature, determined in the spectral range from 500 to 850 nm, is decreasing with wavelength. It is demonstrated that the temperature sensing is possible using the wavelength interrogation, i.e., the position of a given interference maximum is temperature dependent. The temperature sensitivity of the HB fiber under test is −0.25 nm/K and the resolution is better than 0.5 K.     

超高灵敏度太赫兹超导探测器

太赫兹(THz)波段一般定义为0.1–10 THz的频率区间, 对应波长范围3 mm–30 μm, 覆盖短毫米波至亚毫米波段(远红外). 尽管人们早已认识到太赫兹波段具有非常重要的科学意义和广泛的应用前景, 但该波段仍然是一个有待全面研究和开发的电磁频率窗口. 因此, 太赫兹波段的天文观测在天体物理及宇宙学研究中具有不可替代的作用, 对于理解宇宙状态和演化具有非常重要的意义. 具有超高灵敏度的太赫兹超导探测器, 已经成为太赫兹波段观测的主要手段. 本文主要阐述了太赫兹超导探测器的基本类型和工作原理, 以及中国科学院紫金山天文台在该领域的主要研究成果和进展.     

准晶体结构光纤表面等离子体共振传感器特性研究

光纤表面等离子体共振传感器在高灵敏度传感和在线实时监测等领域具有重要意义. 设计了一种六重准晶体结构环形通道光纤表面等离子体共振传感器, 基于有限元法对该传感器的传感特性进行了数值模拟. 研究了光纤各结构参量对传感器特性的影响规律. 研究结果表明: 待测液折射率的有效监测范围为1.25–1.331, 最高灵敏度可达26400 nm·RIU^-1, 传感器具有损耗谱杂峰少、探测范围广、灵敏度高、设计灵活性高和光路可弯曲等特点, 在生化检测、公共安全、环境污染监测以及高灵敏度传感等领域具有广泛的应用前景.     

Direct analysis of anabolic steroids in urine using Leidenfrost phenomenon assisted thermal desorption-dielectric barrier discharge ionization mass spectrometry

Rapid detection of trace level anabolic steroids in urine is highly desirable to monitor the consumption of performance enhancing anabolic steroids by athletes. The present article describes a novel strategy for identifying the trace anabolic steroids in urine using Leidenfrost phenomenon assisted thermal desorption (LPTD) coupled to dielectric barrier discharge (DBD) ionization mass spectrometry. Using this method the steroid molecules are enriched within a liquid droplet during the thermal desorption process and desorbed all-together at the last moment of droplet evaporation in a short time domain. The desorbed molecules were ionized using a dielectric barrier discharge ion-source in front of the mass spectrometer inlet at open atmosphere. This process facilitates the sensitivity enhancement with several orders of magnitude compared to the thermal desorption at a lower temperature. The limits of detection (LODs) of various steroid molecules were found to be in the range of 0.05–0.1 ng mL⁻¹ for standard solutions and around two orders of magnitude higher for synthetic urine samples. The detection limits of urinary anabolic steroids could be lowered by using a simple and rapid dichloromethane extraction technique. The analytical figures of merit of this technique were evaluated at open atmosphere using suitable internal standards. The technique is simple and rapid for high sensitivity and high throughput screening of anabolic steroids in urine.     

Sensitivity analysis and uncertainty calculation for dispersion corrected density functional theory

The precision of binding energies and distances computed with dispersion-corrected density functional theory (DFT-D) is investigated by propagation of uncertainties, yielding relative uncertainties of several percent. Sensitivity analysis is used to calculate the geometry-dependent relative importance of each input parameter for the dispersion correction. While DFT-Ds are exact at asymptotically large distances, their damping functions are shown to play a significant role in binding geometries. This is demonstrated in detail for the interlayer binding of graphite. The techniques presented allow practitioners to quickly compute error bars and to get an a posteriori estimate about the transferability of their results. They can also aid the development of future dispersion corrections.     

Efficient quantification of the importance of contacts for the dynamical stability of proteins

Understanding the stability of the native state and the dynamics of a protein is of great importance for all areas of biomolecular design. The efficient estimation of the influence of individual contacts between amino acids in a protein structure is a first step in the reengineering of a particular protein for technological or pharmacological purposes. At the same time, the functional annotation of molecular evolution can be facilitated by such insight. Here, we use a recently suggested, information theoretical measure in biomolecular design - the Kullback-Leibler-divergence - to quantify and therefore rank residue-residue contacts within proteins according to their overall contribution to the molecular mechanics. We implement this protocol on the basis of a reduced molecular model, which allows us to use a well-known lemma of linear algebra to speed up the computation. The increase in computational performance is around 10(1)- to 10(4)-fold. We applied the method to two proteins to illustrate the protocol and its results. We found that our method can reliably identify key residues in the molecular mechanics and the protein fold in comparison to well-known properties in the serine protease inhibitor. We found significant correlations to experimental results, e.g., dissociation constants and Φ values.