灵敏度控制思想在主动膜系设计中的快速实现算法

 基于斜入射薄膜制备实践中镀膜误差对光谱性能的严重退化影响的认识,提出了一种基于灵敏度控制思想的主动膜系设计方法。在深入分析了镀膜中膜层结构参数误差的分布规律的基础上,运用膜系光谱系数关于膜层参数的导数计算的解析模型,建立了膜系灵敏度的定量计算模型和快速实现算法。以一45°入射高精度消偏振增透膜的设计实验为例,探讨了灵敏度控制思想在膜系设计中的可行性、快速性和有效性。结果表明,这一新型设计方法不会显著增加程序时间消耗,能获得具有良好可镀制性能的薄膜,对于正入射和宽角度入射膜同样适用,而且可以避免昂贵的失败试镀和采样,有助于缩短新薄膜的生产周期,特别是对于高精度斜入射薄膜的重复性制备具有重要意义。     

Analysis of two stacked cylindrical dielectric resonators in a TE₁₀₂ microwave cavity for magnetic resonance spectroscopy

The frequency, field distributions and filling factors of a DR/TE??? probe, consisting of two cylindrical dielectric resonators (DR1 and DR2) in a rectangular TE??? cavity, are simulated and analyzed by finite element methods. The TE(+++) mode formed by the in-phase coupling of the TE??(δ)(DR1), TE??(δ)(DR2) and TE??? basic modes, is the most appropriate mode for X-band EPR experiments. The corresponding simulated B(+++) fields of the TE(+++) mode have significant amplitudes at DR1, DR2 and the cavity's iris resulting in efficient coupling between the DR/TE??? probe and the microwave bridge. At the experimental configuration, B(+++) in the vicinity of DR2 is much larger than that around DR1 indicating that DR1 mainly acts as a frequency tuner. In contrast to a simple microwave shield, the resonant cavity is an essential component of the probe that affects its frequency. The two dielectric resonators are always coupled and this is enhanced by the cavity. When DR1 and DR2 are close to the cavity walls, the TE(+++) frequency and B(+++) distribution are very similar to that of the empty TE??? cavity. When all the experimental details are taken into account, the agreement between the experimental and simulated TE(+++) frequencies is excellent. This confirms that the resonating mode of the spectrometer's DR/TE??? probe is the TE(+++) mode. Additional proof is obtained from B?(x), which is the calculated maximum x component of B(+++). It is predominantly due to DR2 and is approximately 4.4 G. The B?(x) maximum value of the DR/TE??? probe is found to be slightly larger than that for a single resonator in a cavity because DR1 further concentrates the cavity's magnetic field along its x axis. Even though DR1 slightly enhances the performance of the DR/TE??? probe its main benefit is to act as a frequency tuner. A waveguide iris can be used to over-couple the DR/TE??? probe and lower its Q to ≈150. Under these conditions, the probe has a short dead time and a large bandwidth. The DR/TE??? probe's calculated conversion factor is approximately three times that of a regular cavity making it a good candidate for pulsed EPR experiments.     

Toluene sensing properties of SnO2-ZnO hollow nanofibers fabricated from single capillary electrospinning

SnO₂-ZnO hollow nanofibers were fabricated through a facile single capillary electrospinning technology. The structure and toluene sensing properties of the hollow fibers were investigated. The results indicated that the fibers possess a hollow structure, a rough porous surface after being annealed at 600 °C and the diameters are in the range of 80-160 nm. A sensor fabricated from these fibers exhibits considerable sensitivity and good stability against toluene at 190 °C, which can be attributed to the special 1D hollow structure and the promoting effect of the SnO₂/ZnO heterojunction. The formation mechanism and toluene sensing mechanism of SnO₂-ZnO hollow nanofibers were also discussed.     

超极化~(129)Xe磁共振波谱和成像及在生物医学中的应用

文章简要介绍了磁共振波谱和成像的基本原理和对限制其灵敏度的挑战,详细阐述了为增强磁共振信号而制备超极化129Xe的物理机制,论述了129Xe在生物组织中的溶解性以及化学位移的特异性,综述了当前超极化129Xe在肺部、脑部成像领域的研究进展和在临床方面应用所取得的有代表性的研究成果,并讨论了基于超极化129Xe分子生物探针的超灵敏磁共振技术的研究前景,最后对超极化129Xe在生物医学领域的应用与发展作了展望.     

In vivo SNR in DENSE MRI; temporal and regional effects of field strength, receiver coil sensitivity and flip angle strategies

Aim

The influences on the signal-to-noise ratio (SNR) of Displacement ENcoding with Stimulated Echoes (DENSE) MRI of field strength, receiver coil sensitivity and choice of flip angle strategy have been previously investigated individually. In this study, all of these parameters have been investigated in the same setting, and a mutual comparison of their impact on SNR is presented.

Materials and methods

Ten healthy volunteers were imaged in a 1.5 T and a 3 T MRI system, using standard five- or six-channel cardiac coils as well as 32-channel coils, with four different excitation patterns. Variation of spatial coil sensitivity was assessed by regional SNR analysis.

Results

SNR ranging from 2.8 to 30.5 was found depending on the combination of excitation patterns, coil sensitivity and field strength. The SNR at 3 T was 53±26% higher than at 1.5 T (P<.001), whereas spatial differences of 59±26% were found in the ventricle (P<.001). Thirty-two-channel coils provided 52±29% higher SNR compared to standard five- or six-channel coils (P<.001). A fixed flip angle strategy provided an excess of 50% higher SNR in half of the imaged cardiac cycle compared to a sweeping flip angle strategy, and a single-phase acquisition provided a sixfold increase of SNR compared to a cine acquisition.

Conclusion

The effect of field strength and receiver coil sensitivity influences the SNR with the same order of magnitude, whereas flip angle strategy can have a larger effect on SNR. Thus, careful choice of imaging hardware in combination with adaptation of the acquisition protocol is crucial in order to realize sufficient SNR in DENSE MRI.     

Minmax robustness for multi-objective optimization problems

In real-world applications of optimization, optimal solutions are often of limited value, because disturbances of or changes to input data may diminish the quality of an optimal solution or even render it infeasible. One way to deal with uncertain input data is robust optimization, the aim of which is to find solutions which remain feasible and of good quality for all possible scenarios, i.e., realizations of the uncertain data. For single objective optimization, several definitions of robustness have been thoroughly analyzed and robust optimization methods have been developed. In this paper, we extend the concept of minmax robustness (Ben-Tal, Ghaoui, & Nemirovski, 2009) to multi-objective optimization and call this extension robust efficiency for uncertain multi-objective optimization problems. We use ingredients from robust (single objective) and (deterministic) multi-objective optimization to gain insight into the new area of robust multi-objective optimization. We analyze the new concept and discuss how robust solutions of multi-objective optimization problems may be computed. To this end, we use techniques from both robust (single objective) and (deterministic) multi-objective optimization. The new concepts are illustrated with some linear and quadratic programming instances.     

Imposing symmetry in augmented linear systems

This paper discusses the methods of imposing symmetry in the augmented system formulation (ASF) for least‐squares (LS) problems. A particular emphasis is on upper Hessenberg problems, where the challenge lies in leaving all zero‐by‐definition elements of the LS matrix unperturbed. Analytical solutions for optimal perturbation matrices are given, including upper Hessenberg matrices. Finally, the upper Hessenberg LS problems represented by unsymmetric ASF that indicate a normwise backward stability of the problem (which is not the case in general) are identified. It is observed that such problems normally arise from Arnoldi factorization (for example, in the generalized minimal residual (GMRES) algorithm). The problem is illustrated with a number of practical (arising in the GMRES algorithm) and some ‘purpose‐built’ examples. Copyright © 2014 John Wiley & Sons, Ltd.     

绩效度量的一致性、敏感性及准确性关系研究

将环境的波动性和度量噪音看作是影响绩效度量的两类不同的随机误差,在Linear-exponential-normal框架下,建立了以价值绩效度量和补偿绩效度量的线性组合为基础的收益激励模型,并分析了激励强度与绩效度量的一致性、敏感性和准确性之间的关系,以及环境波动性对上述关系的影响.研究发现,在确定性环境条件下,激励强度与绩效度量的"信号噪音比"成正比关系,但绩效度量的一致性的提高并不必然增加该度量指标在激励契约中的权重,而要视敏感性或噪音相对于一致性的变化幅度来定.特别地,在绩效度量的敏感性与一致性之间并不存在权衡取舍关系.研究还发现,波动性与激励强度之间存在负向关系,且波动性的存在降低了绩效度量的一致性和敏感性,但波动性对绩效度量的准确性的影响则呈非单调性变化.     

Incorporating additional meta-objectives into the extended lexicographic goal programming framework

This paper introduces two new meta-objectives into the extended goal programming framework. The first meta-objective is the number of unmet goals and the second is a measure of closeness to the pairwise comparisons given by the decision maker. These complement the original two meta-objectives of the weighted sum of deviations and the maximal weighted deviation to provide a flexible four meta-objective framework. Lexicographic and non-lexicographic representations of the framework are developed. An example relating to transportation is solved in both the lexicographic and non-lexicographic forms. Weight sensitivity analysis is applied to the meta-weight parameters for the non-lexicographic case in order to find a range of available distinct solutions.