Investigation of the effect of CdCl2 processing on vacuum deposited CdS/CdTe thin film solar cells by DLTS

Thin film CdS/CdTe solar cells have been prepared by conventional vacuum deposition technique. Deep level transient spectroscopy (DLTS), temperature and frequency dependent capacitance-voltage (C-V) measurements were utilised to investigate the performance limiting defect states in the CdTe layer subjected to the post deposition treatments such as CdCl₂-dipping and/or annealing in air. Five hole traps, all of which have been previously reported in the literature, were identified in as-grown CdTe at 0.19, 0.20, 0.22, 0.30 and 0.40 eV above the valence band. A single hole trap level has been evidenced at 0.45 eV after both post deposition heat and CdCl₂ treatments.     

Dependence of the interband transition and the activation energy on the ZnTe spacer thickness in CdTe/ZnTe double quantum dots

Photoluminescence (PL) measurements were carried out to investigate the interband transition and the activation energy in CdTe/ZnTe double quantum dots (QDs). While the excitonic peaks corresponding to the interband transition from the ground electronic subband to the ground heavy-hole (E₁-HH₁) in the CdTe/ZnTe double QDs shifted to higher energy with decreasing ZnTe spacer thickness from 30 to 10 nm due to transformation from CdTe QDs to Cd_xZn_1−xTe QDs, the peaks of the (E₁-HH₁) transitions shifted to lower energy with decreasing spacer thickness from 10 to 3 nm due to the tunneling effects of the electrons between CdTe double QDs. The decrease in the activation energy with decreasing ZnTe spacer thickness might originate from an increase in the number of defects in the ZnTe spacer. The present results can help improve the understanding of the interband transition and the activation energy in CdTe/ZnTe double QDs.     

The influence of aliovalent impurities on the oxidation kinetics of nickel at high temperatures

The influence of chromium and sodium on the nickel oxidation kinetics has been studied as a function of temperature (1373-1673 K) and oxygen activity (10−10⁵ Pa O₂), using microthermogravimetric techniques. It has been shown that the oxidation of Ni-Cr and Ni-Na alloys, like that of pure nickel, follows strictly the parabolic rate law being thus diffusion controlled. In agreement with the defect model of Ni_1−yO, it has been found that the oxidation rate of the Ni-Cr alloy is higher than that of pure nickel, the reaction rate is pressure independent and the activation energy of this process is lower. This implies that the concentration of double ionized cation vacancies in a Ni_1−yO-Cr₂O₃ solid solution is fixed on a constant level by trivalent chromium ions, substitutionally incorporated into the cation sublattice of this oxide. In the case of the Ni-Na alloy, on the other hand, the oxidation rate is lower than that of pure nickel, the activation energy is higher and the oxidation rate increases more rapidly with oxygen pressure. These results can again be explained in terms of the doping effect, by assuming that univalent sodium ions dissolve substitutionally in the cation sublattice of nickel oxide.     

Well-dispersed gold nanowire suspension for assembly application

A method for fabricating well-dispersed nanowire suspension has been demonstrated in the paper. Thin gold nanowires were prepared by template synthesis, and then functionalized with sulphonate group-terminated thiols before suspended in different solvents. The degree of aggregation of the obtained suspension was evaluated with transmission electron microscopy (TEM) and UV-vis spectroscopy. It was found that the degree of aggregation was predominated by the solvents, and the best degree of dispersion was obtained when isopropyl alcohol (IPA) was used as the solvent. The gold nanowires from the suspension can be selectively assembled onto chemically patterned substrates. This well-dispersed nanowire suspension is potentially useful for fabricating novel nanodevices.     

载能团簇离子诱发的非线性二次离子发射

载能团簇离子进入固体时, 由于集体相互作用,在入射路径上产生非常高的能量沉积密度。 实验发现, 载能团簇离子的作用结果并不等于团簇中各原子独立作用的总和, 而是具有非线性效应。 就二次离子发射而言, 这种非线性通常与团簇的能量、 团簇的大小、 离子的电荷态以及靶物质的结构有关。 通过研究二次离子发射有助于理解载能团簇离子与物质相互作用过程中的能量沉积与释放机制。 Using energetic cluster as projectile is a unique way to produce simultaneous impacts of several atoms and deposit extremely high energy density in a very small area. The cluster impingement on solids has exhibited some non linear effects not presented in collisions of individual atoms with those solids. The study of the secondary ion emissions can give insight into the energy deposition and relaxation steps of the cluster solid interaction. The dependence of the yields of secondary ion emission induced by clusters on the energy of clusters,cluster sizes,charge states and material structures of the targets was reviewed in this paper.     

Dielectric, thermal and optical study of an unusually shaped liquid crystal

Dielectric measurements have been carried out for the determination of real and imaginary parts of the permittivity of a newly synthesized, unusually shaped liquid crystal. The sample has been investigated in the frequency range from 100 Hz to 10 MHz within a temperature range 80-130 °C. The dielectric measurements in the smectic A phase indicate a Cole-Cole type of dispersion, and the activation energy was found to be 5.5 meV by using the Arrhenius plot of relaxation time. In addition to this, thermal and optical transmittance studies have also been conducted in the above mentioned temperature range, and the temperature dependence of these parameters has been discussed in detail. The phase transition temperature obtained from a differential scanning calorimetry (DSC) study matches within 2 °C that was obtained from an optical transmittance study. The dielectric and optical behavior of the unusually shaped liquid crystal has been explained on the basis of a proposed theoretical model in which a sample possesses two different conformers having induced polarizations in opposite directions.     

Effect of indium doping in CdO thin films prepared by spray pyrolysis technique

Preparation of transparent and conducting indium doped CdO thin films by spray pyrolysis on glass substrate is reported for various concentration of indium (2-8 wt%) in the spray solution. The electrical, optical and structural properties of indium doped CdO films were investigated using different techniques such as Hall measurement, optical transmission, X-ray diffraction and scanning electron microscope. X-ray analysis shows that the undoped CdO films are preferentially orientated along (2 0 0) crystallographic direction. Increase of indium doping concentration increases the films packing density and reorient the crystallites along (1 1 1) plane. A minimum resistivity of 4.843×10⁻⁴ Ω cm and carrier concentration of 3.73×10²⁰ cm⁻³ with high transmittance in the range 300-1100 nm were achieved for 6 wt% indium doping. The band gap value increases with doping concentration and reaches a maximum of 2.72 eV for 6 wt% indium doping from 2.36 eV of that of undoped film. The minimum resistivity achieved in the present study is found to be the lowest among the reported values for In-doped CdO films prepared by spray pyrolysis method.     

Raman spectra of samarium-fullerene intercalation compounds

Samarium-fullerene intercalation compounds of nominal composition Sm_xC₆₀ (x=1,2,…,6) have been synthesized by a solid-state reaction method. We obtain a Sm_2.75C₆₀ superconducting phase with orthogonal structure and a Sm₆C₆₀ phase with body-centered cubic structure. The broadening and weakening of Raman peaks of the Sm_xC₆₀ compounds are due to the distortion of C₆₀ and electron-phonon interaction. The Raman measurements reveal that the distortion of C₆₀ decrease in Sm_xC₆₀ (x=3,4,5) exposed to air, although the fulleride solids have transformed into an amorphous state. The Raman results also show that the distortion of C₆₀ is still very large in the Sm₆C₆₀ exposed to air, or the C₆₀ molecules have been destroyed and become some amorphous carbide.     

不同类型细胞穿膜肽二级结构特征研究

细胞穿膜肽是一类能以受体依赖或非受体依赖方式介导胞吞作用的小分子短肽,能够携带不同分子穿过细胞膜,这一特性使细胞穿膜肽成为一种有效的运输载体,为药物靶向治疗提供了新希望.本文从生物信息角度针对不同长度区间、运输不同类型分子细胞穿膜肽之间的异同二级结构特征进行了系统研究,同时进一步对不同穿膜方式对应的细胞穿膜肽二级结构特征进行了对比研究,结果表明不同类型细胞穿膜肽之间在二级结构组成上具有不同程度差异特征,为今后揭示细胞穿膜肽相关分子结构机制奠定可靠的理论基础.