Second derivative spectrophotometric method for simultaneous determination of cobalt, nickel and iron using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

A simple, sensitive and rapid derivative spectrophotometric method using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) has been developed for simultaneous determination of Co(II), Ni(II) and Fe(II) which have very similar chemical behavior and appear together in many real samples. The complexes of all these metal ions with 5-Br-PADAP were formed immediately at pH 7.0 ammonium acetate buffered solution and were stable for at least 24 h. Second derivative spectra were selected for evaluation, because working wavelength determination was more precise and spectral overlap was less than in the ordinary and first derivative spectra. Three wavelengths at which the complexes exhibit extremum ²D values for Co(II), Ni(II) and Fe(II) were selected as analytical wavelengths, i.e., 640, 600 and 740 nm, respectively. Calibration curves drawn with zero-to-peak values at mentioned wavelengths were linear between 80 and 2000 ng ml⁻¹ for each metal ion. Concentrations of Co(II) and Ni(II) were calculated from the total ²D values and the sum of the linear equations for these three cations at 640 and 600 nm, after Fe(II) assay by making use of the ²D value at 740 nm. Limits of detection (LOD) for Co(II), Ni(II) and Fe(II) were 2.7, 13.9 and 3.0 ng ml⁻¹, respectively. The method has been applied to tool steel and heater resistance wire samples successfully.     

Computer-aided multichannel detection in high-performance liquid chromatography

Summary The development of a computer-aided rapid-scanning detector for HPLC based on the linear photodiode array UV-visible spectrophotometer is described. Chomatograms monitored at up to three wavelengths, with automatic capture of spectra for eluted peaks and post-run processing of spectral data to generate log₁₀ (A) spectra, second derivative and fourth derivative spectra, are described. Methods are reported for the analysis of forensic samples of diacetylmorphine (heroin) in the presence of the degradation products and potential contaminants caffeine, papaverine, 6-acetylcodeine, thebaine, 6-acetyl-morphine, procaine and morphine separated by HPLC. The novel use of second and higher derivative spectra for the qualitative characterisation of drugs and contaminants separated by HPLC is described.Presented at the 14th International Symposium on Chromatography London, September, 1982     

Synthesis and X-ray structural characterisation of the tetramethylene oxonium derivative of the hydrodecaborate anion. A versatile route for derivative chemistry of [B10H10]

The oxonium derivative P(C₆H₅)₄[2-B₁₀H₉O(CH₂)₄] (1) has been prepared from [B₁₀H₁₀]²⁻ by a solvent-addition reaction route, promoted by Et₂O · BF₃. Its structure has been confirmed by single crystal X-ray analysis. 1 is assumed to be a useful synthon for the derivative chemistry of [B₁₀H₁₀]²⁻. As an illustration, ring-opening reaction occurred in presence of the strong nucleophilic agent OH⁻, giving the monoanionic derivative [P(C₆H₅)₄]₂[2-B₁₀H₉O(CH₂)₄OH] (2).     

Organofluorine compounds and fluorinating agents

Starting with 1,2,4,6-tetra-O-acetyl-3-O-dodecyl-β-d-glucose (1), mixed alkyl-perfluoroalkyl substituted sugar derivatives with an anomeric perfluoroalkylthio group and an O-alkyl group in the 3 position were synthesized via 2,4,6-tri-O-acetyl-3-O-dodecyl-1-thio-β-d-glucose (4). The latter was S-perfluorohexylated with 1-iodoperfluorohexane in a dithionite initiated reaction yielding perfluorohexyl 2,4,6-tri-O-acetyl-3-O-dodecyl-1-thio-β-d-glucopyranoside (5). Experiments with the aim compound 5 completely to deacetylate ended in surprising results. Thus, methanolic methanolate solution produced the orthoester 7 as the result of α-fluoride replacement by methoxy groups as well as the methyl glucoside 8 as the result of a transglycosylation reaction. Alumina supported cesium fluoride cleaved regioselectively the two acetyl groups in the 4- and 6-position yielding perfluorohexyl 2-O-acetyl-3-O-dodecyl-1-thio-β-d-glucopyranoside (10). A complete deacetylation of 5 to amphiphile 11 succeeded only with methanolic tert-butanolate. However, the products 8 and 10 were likewise formed.     

应用扩展的重叠分辨率法优化液相色谱条件分离二茂铁类化合物

本文对优化液相色谱分离条件的重叠分辨率法进行了改进与扩展：首先利用全范围的二元线性梯度淋洗进行溶剂强度的优化，再通过重叠分辨率法进行了溶剂选择性的优化，并且建立了计算机系统，使此方法程序化。利用此方法建立了分离Ｎ－二茂铁甲酰基－Ｎ＇－芳基硫脲类衍生物的最佳流动相体系。     

Second-order nonlinear optical properties of side-chain liquid crystalline polymers studied by second harmonic generation from thin films

The two independent elements of the second-order nonlinear optical susceptibility tensor of a range of contact poled, donor–acceptor substitued side-chain polymers are reported. The susceptibilities were measured by second harmonic generation from thin films, typically less than 0.5 μm thick, at a fundamental wavelength of 1064 nm. The largest value was χ = 2.64 pm/V which is three times greater than the χ value of KDP and was measured in a nitrobenzylidene side chain, polyhydroxystyrene polymer with an eleven unit alkyl chain spacer attaching the side group to the backbone. Typical susceptibility values obtained were χ～0.3 pm/V and X⁽²⁾₃₃～1 pm/V. The coherence lengths of the materials, which lay in the range 4–12 μm, were measured at 1064 nm by the maker fringe technique using thick, wedge-shaped samples.     

Photovoltaic Characteristics of a Naphthylamine Derivative

Organic photovoltaic （OPV） cells were fabricated via vacuum vapor deposition with {4-[2-（3-di-cyanomethylidene-5,5-dimethylcyclohexenyl）vinyl]phenyl}di（1-naphthyl）amine （DNP-2CN） as the electron donor, and fullerene （C60） as the electron acceptor. A thin film （10 nm） of tris（8-quinolinolato）aluminum （Alq3） was adopted as the buffer layer. A device based on this DNP-2CN exhibited an open circuit voltage （Voc） of 370 mV, a short-circuit current density （Jsc） of 0.61 mAocm 2, and a white-light power conversion efficiency （ η） of 0.09% （AM1.5, 75 mW.cm^- 2）.     

Capillary electrochromatographic separation of enantiomers under aqueous mobile phases on a covalently bonded cellulose derivative chiral stationary phase

A chemically bonded cellulose tris(3,5-dimethylphenylcarbamate) chiral stationary phase (CSP) was prepared by a radical polymerization reaction. The prepared CSP was packed into fused-silica capillaries with inner diameter of 75 microm to perform enantiomer separations in CEC. The electrochromatographic behavior of the CSP was investigated. On the prepared CSP, high EOF could be generated under acidic mobile phases, which represented an advantage for the separation of acidic enantiomers. Several neutral, acidic, and basic enantiomers were resolved on the prepared CSP under aqueous mobile phases. The column efficiencies were between 20,000 and 100,000 plates/m, which were much higher than those of HPLC. In addition, it was observed that the separation of some enantiomers benefited from the adoption of THF as mobile phase modifier.     

Single-crystal 2H NMR of deuterated 1,10-decanedicarboxylic acid included in hydrogenated urea channels

The intergrowth of 1,10-decanedicarboxylic acid and urea give infinite hydrogen-bonded chains of the guest included in the hexagonal urea host. A deuterium high-resolution solid-state NMR study of the selectively deuterated intergrowth compound 1,10-decanedicarboxylic acid/hydrogenated urea at variable temperature in the range 90 < or = T < or = 300 K was performed on a single crystal. The analysis of the second moment as a function of temperature is shown to be compatible with the known phase transition occurring near T(c) = 203 K. Moreover, the spectra indicate that the orientational disorder is strong, and is compared to an axial uniform disorder. For this purpose, the general equation for the second moment of a system with uniform two-dimensional axial orientational disorder is given, and a method to take into account the non-uniform excitation of the pulse sequence is proposed.     

Investigation into new materials for optical devices: the miscibility and solvent effects of azobenzene derivative blends

With the increasing demand for novel devices with optical applications the search for new materials to data store and process becomes a priority. By introducing blends, tailor made properties and low cost give added advantage. Miscibility is an essential requirement for a new material, this research thus involves miscibility studies of poly(4‐(N‐(2‐methacryloyloxyethyl)‐N‐ethylamino)‐4′‐nitroazobenzene)₉₀‐co‐(methyl methacrylate)₁₀, (azobenzene derivative) with polymethyl‐methacrylate (PMMA), polyvinylacetate (PVAc) and polyvinylchloride (PVC) prepared in tetrahydrofuran (THF), and/or dimethylformamide (DMF) and/or dichloromethane (CH₂Cl₂). The glass transitions, solvent and varying molecular weight effect were investigated, since these all primarily influence the miscibility. THF was found to encourage miscibility at specific compositions of PVAc and PVC blends. However, with CH₂Cl₂ and DMF immiscibility is encouraged. The Fox–Flory equation was applied to the blends analyzing the PVC blends in DMF as deviations from ideality. Different molecular weights of PMMA were identified as immiscible regardless of solvent. PMMA's lower solubility in THF and CH₂Cl₂ compared to the azobenzene derivative, displayed the existence of PMMA islands. In all blends the favorable and unfavorable interactions between polymer–solvent–polymer systems are considered. Furthermore, the miscibility effect on increasing the MMA content of the azobenzene derivative was also investigated. Copyright © 2002 John Wiley & Sons, Ltd.