反渗透膜微结构的调控及海水脱硼性能的提升

通过引入聚乙烯亚胺(PEI)链与对叠氮苯甲酸(ABA)分子对薄层芳香聚酰胺复合反渗透膜(TFC)进行接枝改性, 采用傅里叶衰减全反射红外光谱(ATR-FTIR)和X射线光电子能谱(XPS)分析了反渗透膜活性分离层的化学组成和结构, 用静态水接触角仪与Zeta电位仪测试了反渗透膜表面的亲疏水性和电荷性质, 并利用扫描电子显微镜(SEM)及原子力显微镜(AFM)观察其表面形貌, 测试了反渗透膜在苦咸水与海水条件下的分离性能. 实验结果表明, 使用PEI与ABA对反渗透膜改性后, 提升了其分离层的致密度, 使硼渗透通过反渗透膜时的传质阻力变大, 从而将改性反渗透膜(TFC-PEI-ABA)对硼的截留率提升至90.45%, 达到了世界卫生组织对水质的要求.     

Optimization of butyltin measurements for seawater,tissue, and marine sediment samples

Optimized techniques for measuring butyltins at the sub-part-per-trillion (ppb; 1:10¹²) level in seawater and at the part-per-billion (ppb; 1:10⁹) level in tissues and sediments are presented. Purge and trap/hydride derivatization followed by atomic absorption (AA) detection was optimized to give better sensitivity than was previously attained for seawater, yielding environmental detection limits of 0.08–0.2 ng dm^?3. Improvement in precision and reproducibility in measurement of butyltins in tissues and sediments was attained by adjustment of the concentration in an organic extract to minimize matrix effects and by use of internal standards. The tissues and sediments were homogenized and extracted with methylene chloride (CH₂Cl₂) after acidification. The butyltins in the organic layer were derivatized with hexylmagnesium bromide and analyzed by gas chromatography (GC) with a flame photometric detector (FPD). The absolute detection limits in tissues and sedimets were 0.1 ng for tributyltin (TBT), 0.12 ng for dibutyltin (DBT) and 0.29 ng for monobutyltin (MBT).     

Interferometric Sensor for Electrochemical Studies of Metallic Alloys in Aqueuos Solution

In a previous study a mathematical model relating surface and bulk behaviors of metals in aqueous solution was developed. The model was established based on principles of holographic interferometry for measuring microsurface dissolution, i.e., mass loss, and on those of electrochemistry for measuring the bulk electronic current, i.e., corrosion current. In the present work, an interferometric sensor was built based on the above model, and the corrosion current density of coated copper and brass in seawater were obtained using this sensor. The interferometric sensor was also utilized for the first time to measure the initial stage of the anodization process (oxidation) of aluminium samples in aqueous solution. This was carried out chemically in different acid concentrations (3.125–25% H₂SO₄) at room temperature. The sensor was further used for observation of catalytic activities, i.e., pitting corrosion, which occurred subsequent to the anodization of the aluminium samples in aqueous solutions, after an oxide film had been formed.     

Study of acoustic nonlinearity parameter B/A for seawater

I.Introductionlnthcearlyfifties,thercweremanyresearchworksonpropagatingmechanismofultrasonicwaveinseawater,itssoundve1ocity,absorptionandattenuation.Withthedevelop-mcntandapp1icationofhigh-powersoundsourcc,suchasSONARinnavy,thenonlinearacousticaleffectscausedbyfiniteamplitudeu1trasonicwavetravellingthroughseawaterbecomemoreevident.Thcrcfore,tostudythesenonlinearacousticaleffectsandtheirinfluenccsalsobecomcsmuchmoreimportant.Moreover,ithasbeenexpccted'foralongtimetogetalowfrequencyandhighlydi…     

Steady filtration problems with seawater intrusion: macro‐hybrid penalized finite element approximations

Macro‐hybrid penalized finite element approximations are studied for steady filtration problems with seawater intrusion. On the basis of nonoverlapping domain decompositions with vertical interfaces, sections of coastal aquifers are decomposed into subsystems with simpler geometries and small scales, interconnected via transmission conditions of pressure and flux continuity. Corresponding local penalized formulations are derived from the global penalized variational formulation of the two‐free boundary flow problem, with continuity transmission conditions modelled variationally in a dual sense. Then, macro‐hybrid finite element approximations are derived for the system, defined on independent subdomain grids. Parallel relaxation penalty‐duality algorithms are proposed from fixed‐point problem characterizations. Numerical experiments exemplify the macro‐hybrid penalized theory, showing a good agreement with previous primal conforming penalized finite element approximations (Comput. Methods Appl. Mech. Engng. 2000; 190 :609–624). Copyright © 2005 John Wiley & Sons, Ltd.     

近岸及河口海水中全氟化合物的固相萃取富集/超高效液相色谱-串联质谱测定

建立了近岸及河口海水中全氟辛基磺酸(PFOS)、全氟辛酸(PFOA)、全氟十一酸(PFUn A)、全氟十二酸(PFDo A)、全氟十三酸(PFTr DA)、全氟十四酸(PFTA)6种全氟化合物(PFCs)的超高效液相色谱-串联质谱(UHPLC-MS/MS)测定方法。使用C18固相萃取小柱对500 m L水样中的目标物进行富集后,用15 m L甲醇-乙酸乙酯混合淋洗液(4∶1)进行洗脱,浓缩,定容至1.0 m L后,用Kinetex XB-C18色谱柱以均含5.0mmol/L甲酸铵的甲醇-水为流动相梯度洗脱方式进行分离,电喷雾负离子模式(ESI-)电离,多重反应监测模式(MRM)以及内标法对6种PFCs进行定性定量测定。优化了固相萃取、色谱分离及质谱测定条件,考察了海水盐度对方法回收率的影响。在优化实验条件下,方法在2.0,5.0,10.0 ng/L加标水平下,实际海水样品的回收率为80.1%~117.4%,在2.0 ng/L加标水平的相对标准偏差(RSD,n=7)为8.2%~12.1%。6种PFCs的线性范围为0.5~50.0μg/L,相关系数大于0.999 0;方法的定量下限(LOQ,S/N=10)为0.5~1.5 ng/L。该方法具有样品前处理简单、分析速度快、选择性好的特点,适用于近岸及河口海水中全氟化合物的快速测定。     

Identification and quantification of domoic acid by UHPLC/QTOF tandem mass spectrometry,with simultaneous identification of non-target photodegradation products

Amnesic shellfish poisoning is a potentially lethal human toxic syndrome which is caused by domoic acid (DA), a neurotoxin produced by marine phytoplankton, principally from Pseudonitzschia genus. In this report, a method to identify and quantify the DA toxin, with simultaneous identification of its photodegradation products, has been developed. It uses an ultra high performance liquid chromatography coupled to a quadrupole-time-of-flight tandem mass spectrometer (UHPLC–QTOF) after solid-phase extraction (SPE). An unambiguous identification of DA was carried out by considering both the retention time of DA in UHPLC and the exact mass of protonated DA molecule ([M + H]⁺ = 312.1447 m/z) and of the most intense fragment ion (m/z 266.1391). The quantification was conducted using protonated DA molecule with protonated Glafenin as internal standard, obtaining a limits of detection of 0.75 µg L^?1. Large screening with UHPLC–QTOF could also give structural information about degradation products of DA present in samples after UV-irradiation. This method was applied for the determination of DA in complex liquid samples after SPE and is applicable for environmental monitoring of this toxic substance in the aquatic environment.     

Sliding friction and wear behaviors of plasma sprayed aluminum–bronze coating in artificial seawater

The friction and wear behaviors of plasma sprayed aluminum–bronze (CuAl) coating sliding against silicon nitride (Si₃N₄) in artificial seawater were investigated and compared with those in pure water and dry sliding. The morphologies of the worn surfaces were analyzed by three‐dimensional non‐contact surface mapping and scanning electron microscopy. Moreover, chemical states of the tribochemical products of CuAl/Si₃N₄ in seawater were characterized by X‐ray photoelectron spectroscopy. Results show that the plasma sprayed CuAl coating possessed a specific wear rate (in order of 10^?7 mm³/Nm) in seawater more than 600 times smaller than that in dry sliding due to the great alleviation in abrasion wear and splats delamination. Besides, the CuAl/Si₃N₄ had a friction coefficient of 0.06 in seawater, significantly lower and more stable than those in pure water and dry sliding. The tribochemical products of CuAl/Si₃N₄ in seawater, which were proved to be silica, alumina, and their hydrates, transformed into a loosened wear‐debris layer under the coagulation effect of the seawater and dominated the excellent lubrication state in artificial seawater. Copyright © 2014 John Wiley & Sons, Ltd.     

A 6.5-year continuous record of sea surface salinity and seawater isotopic composition at Harbour of Ishigaki Island,southwest Japan

We produced continuous records of sea surface salinity and isotopic composition from 1998 to 2004 at Ishigaki Island, southwest Japan, and found clear seasonal variations in salinity and oxygen isotopic composition and increasing trends of them after 1999. These increasing trends could be principally due to the decreasing difference between local precipitation (P) and evaporation (E), as a result of the reduction of horizontal vapour transport from adjacent oceans. When samples collected in heavy rainfall events were excluded, the average Δδ¹⁸O/Δ salinity slope was obtained as 0.31, 0.35 in summer and 0.28 in winter. Estimated E/P ratios based on the isotopic box model are in good agreement with the ratios of independently estimated E to observed P.