化学蒸气沉积硅氧化合物调变HZSM－5沸石的研究

本文研究了正硅酸乙酯分别在无胺法和有胺法制得的ＨＺＳＭ－５沸石上的沉积过程，并用吸附，ＮＨ３－ＴＰＤ及异丙醇探针反应等手段表征了沉积后的样品，发现沉积仅在外表面上进行，可使孔口变小但不影响孔道内性质，显示有对于二甲苯分子的择形吸附能力，且在甲苯甲醇烷基化反应和二甲苯异构化反应中表现出良好的择形催化性能．     

氧化钇粒度控制与测定

用氨水或碳酸氢铵与氯化钇溶液反应生成沉淀，煅烧沉淀制备了D50为0．45μmt 2-10μm的各种粒径的氧化钇粉末。分别采用Coulter MultisizerⅡ和90Plus粒度仪测定微米和亚微米级氧化钇粉体粒度，研究了分散剂，待测样品量，分散时间等因素对亚微米级氧化钇粉体粒度测量精度的影响。     

Effect of NaOH and NaCl on the disodiumn-decane phosphonate micellar aggregation number

The diffusion coefficient of disodiumn-decane phosphonate micelles was studied by polarography at 25°C in NaCl and in NaOH solutions, and the size and aggregation number of the micelles was computed as a function of Na⁺ concentration. All other conditions being equal, the addition of NaCl produces micelles with an aggregation number one order of magnitude larger than the NaOH addition. This is due to the increase of the effective charge per micellized head group produced by the reaction of OH- with the hydrolized head groups which are mainly present as-PO₃H- in the micellar Stern layer.     

Physico-chemical characterization of nanofiltration membranes.

This study presents a methodology for an in-depth characterization of six representative commercial nanofiltration membranes. Laboratory-made polyethersulfone membranes are included for reference. Besides the physical characterization [molecular weight cut-off (MWCO), surface charge, roughness and hydrophobicity], the membranes are also studied for their chemical composition [attenuated total reflectance Fourier spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS)] and porosity [positron annihilation spectroscopy (PAS)]. The chemical characterization indicates that all membranes are composed of at least two different layers. The presence of an additional third layer is proved and studied for membranes with a polyamide top layer. PAS experiments, in combination with FIB (focused ion beam) images, show that these membranes also have a thinner and a less porous skin layer (upper part of the top layer). In the skin layer, two different pore sizes are observed for all commercial membranes: a pore size of 1.25-1.55 angstroms as well as a pore size of 3.20-3.95 angstroms (both depending on the membrane type). Thus, the pore size distribution in nanofiltration membranes is bimodal, in contrast to the generally accepted log-normal distribution. Although the pore sizes are rather similar for all commercial membranes, their pore volume fraction and hence their porosity differ significantly.     

Sampling and local models for multivariate image analysis

Local models are a very important concept for microscopic and macroscopic imaging. Different methods of sub-sampling a multivariate image are described both in general and for three examples. The need for sub-sampling and its influence on multivariate image analysis and visualization are studied. Examples from MRI (256 × 256), satellite imaging (7 × 512 × 512) and biofuel studies (6 × 512 × 512) are used to illustrate some of the principles involved.     

Binding Ensembles of p53-MDM2 Peptide Inhibitors by Combining Bayesian Inference and Atomistic Simulations

Designing peptide inhibitors of the p53-MDM2 interaction against cancer is of wide interest. Computational modeling and virtual screening are a well established step in the rational design of small molecules. But they face challenges for binding flexible peptide molecules that fold upon binding. We look at the ability of five different peptides, three of which are intrinsically disordered, to bind to MDM2 with a new Bayesian inference approach (MELD × MD). The method is able to capture the folding upon binding mechanism and differentiate binding preferences between the five peptides. Processing the ensembles with statistical mechanics tools depicts the most likely bound conformations and hints at differences in the binding mechanism. Finally, the study shows the importance of capturing two driving forces to binding in this system: the ability of peptides to adopt bound conformations (ΔGconformation) and the interaction between interface residues (ΔGinteraction).     

Solid sampling Fourier transform infrared determination of Mancozeb in pesticide formulations

A series of approaches have been assayed for FTIR determination of Mancozeb in several solid commercial fungicides using different calibration strategies. The simplest procedure was based on the use of the ratio between the absorbance of a characteristic band of Mancozeb and that of a KSCN internal standard measured in the FTIR spectra obtained from KBr pellets. It was employed the quotient between peak height absorbance values at 1525 cm⁻¹ for Mancozeb and 2070 cm⁻¹ for KSCN. In these conditions a precision as relative standard deviation (RSD) of 0.6% and a relative accuracy error of 0.8% (w/w) were found. For complex formulations, containing other compounds with characteristic absorption bands at different wavenumbers than Mancozeb, one of them was used as internal reference being employed the standard addition approach. In this case, the Mancozeb bands at 1525 cm⁻¹ or at 1289 cm⁻¹ were employed, being used the ferrocyanide band at 2075 cm⁻¹ as internal reference. RSD values between 0.7-1.4% and a relative accuracy error of 3% (w/w) were found. A third strategy was based on the use of partial least squares (PLS) calibration. A reference set was prepared mixing Mancozeb, Kaolin, Cymoxanil and KBr, being predicted the Mancozeb concentration in pesticide formulations by using the quotient between absorbance bands of Mancozeb and those of Cymoxanil. In these conditions a relative accuracy error of 0.6% (w/w) and a relative standard deviation of 1.3% were found.     

Filter Diagonalization with Finite Fourier Transform Eigenfunctions

Below, we briefly report on the progress in the development of the Filter Diagonalization technique when filtering is carried out with the aid of Finite Fourier Transform (FFT) eigenfunctions. During recent years interest in these functions, also known as ‘prolates’, or ‘slepians’, has increased among scientists doing research in the field of signal processing. The main explanation to this follows from the set of very special extremal and orthogonality properties exibited by the FFT eigenfunctions. Recent results of Walter and Shen on sampling with prolate spheroidal functions will necessary produce a new wave of interest. In the presented, Filter diagonalization machinery, we show that the sampling formula of Walter and Shen simplifies essentially the computation of matrix elements as certain 2D–integrals involving FFT eigenfunctions.     

Spectral regions selection to improve prediction ability of PLS models by changeable size moving window partial least squares and searching combination moving window partial least squares

Changeable size moving window partial least squares (CSMWPLS) and searching combination moving window partial least squares (SCMWPLS) are proposed to search for an optimized spectral interval and an optimized combination of spectral regions from informative regions obtained by a previously proposed spectral interval selection method, moving window partial least squares (MWPLSR) [Anal. Chem. 74 (2002) 3555]. The utilization of informative regions aims to construct better PLS models than those based on the whole spectral points. The purpose of CSMWPLS and SCMWPLS is to optimize the informative regions and their combination to further improve the prediction ability of the PLS models. The results of their application to an open-path (OP)/FT-IR spectra data set show that the proposed methods, especially SCMWPLS can find out an optimized combination, with which one can improve, often significantly, the performance of the corresponding PLS model, in terms of low prediction error, root mean square error of prediction (RMSEP) with the reasonable latent variable (LVs) number, comparing with the results obtained using whole spectra or direct combination of informative regions for a compound. Regions consisting of the combinations obtained can easily be explained by the existence of IR absorption bands in those spectral regions.     

On-column injection onto capillary columns. Part 2: Study of sampling conditions; practical recommendations

During one year continuous use of on-column injection, the typical advantages described in our first report have fully been confirmed. In addition the analysis of large sample volumes has proved promising. Only minor modifications have been applied to the on-column injector device. Broad evidence has been gathered showing that full separation efficiency of the capillary columns after on-column injection is attained only when cold trapping or the solvent effect, as band shortening mechanisms, are working- While, under the conditions of on-column injection, cold trapping is less efficient than with other injection techniques, the opposite holds true for the solvent effect. Compared with splitless injection, the danger of excessive solvent condensation on the column is increased. A working rule is presented for establishing the optimal chromatographic conditions for handling large sample volumes while ensuring full separation efficiency yet avoiding harm to the column.