Using the diphosphanyl radical as a potential spin label: effect of motion on the EPR spectrum of an R1(R2)P--PR1 radical

The EPR spectrum of the novel radical Mes*(CH3)P--PMes* (Mes*=2,4,6-(tBu)3C6H2) was measured in the temperature range 100-300 K, and was found to be drastically temperature dependent as a result of the large anisotropy of the 31P hyperfine tensors. Below 180 K, a spectrum of the liquid solution is accurately simulated by calculating the spectral modifications due to slow tumbling of the radical. To achieve this simulation, an algorithm was developed by extending the well-known nitroxide slow-motion simulation technique for the coupling of one electron spin to two nuclear spins. An additional dynamic process responsible for the observed line broadening was found to occur between 180 K and room temperature; this broadening is consistent with an exchange between two conformations. The differences between the isotropic 31P couplings associated with the two conformers are shown to be probably due to an internal rotation about the P--P bond.     

Sample evaporation in conventional split/splitless GC injectors. Part 3: Retaining the liquid in the vaporizing chamber

As most sample liquids tend to pass through an empty injector insert at a speed which is too high to enable complete evaporation, movement of the liquid must be arrested before it reaches the column entrance. Stopping the liquid means deposition on to a surface; this, however, is possible only after the temperature of the surface has been cooled to (or below) the boiling point of the liquid (solvent). The performance of different means of stopping the liquid has been tested visually (by the method described in Part 2). Baffles on the wall of the injector insert had hardly any effect on evaporation: the band of liquid leaving the syringe needle performed a perfect slalorn around them. The inverted cup proved more efficient, but the best performance was obtained from a light plug of glass wool: owing to its low thermal mass, the first fibers to be met by the liquid are immediately cooled to the solvent boiling point, allowing the liquid to wet it. The sample liquid is sucked up by the glass wool, from where the sample evaporates relatively slowly, often over a period of several seconds.     

First synthesis of enantio-uracil dinucleotide, comparison of physicochemical properties of their enantiomers, and separation by chiral column chromatography

Enantio-uracil dinucleotide 5, which consists of two l-uridylic acids and one pyrophosphate, was synthesized for the first time in our laboratory. Benzolyated l-uridine was prepared by a stereoselective glycosylation of silylated uracil with l-1-O-acetyl-2,3,5-tri-O-benzoylribose (l-ABR 7). After deprotection, l-uridine 9 was converted to P¹,P⁴-di(l-uridine 5′-) tetraphosphate tetrasodium salt (l-UP₄U 5) by treatment of l-UMP morpholidate 10c with triethylammonium pyrophosphate (TEA-PPi 11b). Spectral data of synthesized l-UP₄U 5 are given in the references. All spectral data were identical with those of UP₄U 3 except the specific rotation, which showed a positive value compared to UP₄U 3 having a negative value. Furthermore, the separation by chiral column chromatography was investigated.     

Absolute configuration of C2-symmetric spiroselenurane: 3,3,3',3'-tetramethyl-1,1'-spirobi[3 H,2,1]benzoxaselenole

The enantiomers of 3,3,3',3'-tetramethyl-1,1'-spirobi[3 H,2,1]benzoxaselenole have been separated on a chiral preparative chromatographic column. The experimental vibrational circular dichroism (VCD) spectra have been obtained for both enantiomers in CH(2)Cl(2). The theoretical VCD spectra have been obtained by means of density functional theoretical calculations with the B3 LYP density functional. From a comparison of experimental and theoretical VCD spectra, the absolute configuration of an enantiomer with positive specific rotation in CH(2)Cl(2) at 589 nm is determined to be R. This conclusion has been verified by comparing results of experimental optical rotatory dispersion (ORD) and electronic circular dichroism (ECD) to predictions of the same properties using the B3 LYP functional for the title compound.     

High-sensitivity analyses of metabolites in biological samples by capillary electrophoresis using dynamic pH junction-sweeping

Emerging fields of biochemical research, such as metabolomics, present challenges to current separation technologies because of the large number of metabolites present in a cell and their often low (submicromolar) concentration. Although capillary electrophoresis (CE) holds great promise as the method of choice for high-resolution separations of biological samples, it suffers from poor concentration sensitivity, especially with the use of UV detection. In CE, sweeping and dynamic pH junction represent two complementary on-line focusing techniques that have been used for sensitivity enhancement of hydrophobic and weakly acidic analytes, respectively. However, the application of either the sweeping or dynamic pH junction technique alone might, in some cases, be less effective for the analysis of certain sample mixtures. Recent work in the development of a hyphenated dynamic pH junction-sweeping technique is presented as an effective on-line method of preconcentration suitable for both hydrophilic (anionic) and hydrophobic (neutral) analytes. Sensitive analyses of flavin metabolites by CE with laser-induced fluorescence (LIF) detection is demonstrated in various biological matrixes, including cell extracts of Bacillus subtilis, pooled human plasma, as well as heat-deproteinized flavoenzymes. Enhanced analyte band narrowing and improved sensitivity is achieved for flavins using dynamic pH junction-sweeping compared to either sweeping or dynamic pH junction alone. This results in over a 1200-fold improvement in sensitivity relative to conventional injection methods, giving a limit of detection (LOD, defined as S/N = 3) of about 4.0 x 10(-12) M. Strategies for sensitive and more comprehensive analyses of other cell metabolites, including nucleotides, coenzymes, and steroids, are also discussed when using on-line focusing techniques in conjunction with multiplexed CE and UV detection.     

Solid-state,optical-rotation measurements on macromolecules using powder-suspensions

Summary We report techniques for measuring optical rotation of suspended solids, including dissymmetric molecular crystals (e.g. sodium chlorate and bromate), synthetic polymers, polypeptides and biopolymers. Examples include poly(triphenylmethyl methacrylate), poly-S-lactide, poly-L-hydroxyproline, hemocyanine, cellulose acetate andRNA. The results indicate that optical rotation measurements are sensitive to differences in secondary structure and can serve as a probe for structural differences between solid-state and solution.

---

Messung der optischen Rotation von Makromolekülen im Festzustand unter Verwendung von Pulversuspensionen

Zusammenfassung Es wird über eine Methode zur Messung der optischen Rotation von Festkörpern in Suspensionen berichtet, wobei dissymetrische Kristalle (z. B. Natriumchlorat und -bromat), synthetische Polymere, Polypeptide und Biopolymere behandelt werden. Die Beispiele umfassen Poly(triphenylmethylmethacrylat), Poly-S-lactid, Poly-L-hydroxyprolin, Hemocyanin, Celluloseacetat undRNA. Die Ergebnisse zeigen, daß die optischen Rotationen bezüglich Unterschiede in der Sekundärstruktur empfindlich sind und daß diese Messungen als ein Maß für Strukturunterschiede zwischen Festzustand und Lösung herangezogen werden können.

     

A new method for the derivation of exact vibration-rotational kinetic energy operator in internal coordinates

An efficient angular momentum method is presented and used to derive analytic expressions for the vibration-rotational kinetic energy operator of polyatomic molecules.The vibration-rotational kinetic energy operator is expressed in terms of the total angular momentum operator J,the angular momentum operator J and the momentum operator p conjugate to Z in the molecule-fixed frame Not only the method of derivation is simpler than that in the previous work,but also the expressions ot the kinetic energy operators arc more compact.Particularly,the operator is easily applied to different vibrational or rovibrational problems of the polyatomic molecules by variations of matrix elements Gn of a mass-dependent constant symmetric matrix     

Practical capillary gas chromatography—a systematic approach

Capillary gc is now rapidly expanding. Naturally, initiation is most often attempted on the basis of the experience acquired with packed columns. However, such an extrapolation is successful only if a number of essential peculiarities of capillary gc are considered. Based on practical examples this paper discusses six essential details: 1) design and maintenance of the gas flow paths, 2) the greatly increased importance of sampling technique, which should not be confined just to stream splitting, 3) the problems in quantitative analysis arising from small sample size, 4) specific sources of trouble related to small amounts of liquid phase, 5) specific arguments for the choice of the carrier gas, clearly pointing to hydrogen as the ideal carrier and, 6) the different way to approach column production. Figures for all selected examples are given.     

XRF分析铁矿粉的标准选择判据研究和应用

本文对ＸＲＦ法分析铁矿的基体校正元素进行了研究，并建立了标准选择判据，编制的计算软件可以自动地从大量标样中选择适合该样品分析的标准。该法可用于粉末压片制样的分析，方法快速，准确度和精密度均符合生产要求。     

Novel enrofloxacin imprinted polymer applied to the solid-phase extraction of fluorinated quinolones from urine and tissue samples

A new molecularly imprinted polymer, prepared following a non-covalent approach, was synthesised using enrofloxacin as a template molecule. The imprinting effect of the polymer was verified by chromatographic evaluation and, interestingly, this evaluation also revealed that the imprinted polymer showed a high degree of cross-reactivity for ciprofloxacin, the major metabolite of enrofloxacin. The molecularly imprinted polymer was then applied as a selective sorbent in a two-step solid-phase extraction method focussing upon complex biological matrices, specifically human urine and pig liver. This two-step solid-phase extraction protocol, in which a commercial Oasis HLB cartridge and a molecularly imprinted solid-phase extraction cartridge were combined, allowed enrofloxacin and ciprofloxacin to be determined by liquid chromatography coupled to a UV detector at levels below the maximum residue limits established by the European Union. The quantification and detection limits in tissue samples of enrofloxacin and ciprofloxacin were established at 50 μg kg⁻¹ and 30 μg kg⁻¹, respectively.