微波效应实验最小样本量估计分析

 为规范微波效应实验最小样本量,采用区间估计的统计推断方法,开展了样本作用概率与总体作用概率对应关系的分析和研究工作,对满足一定置信度和一定总体作用概率下所需要的最小样本量进行估计。研究结果表明,实验最小样本量确定为10是较为合理的。在80％的置信度下,当10支样本量样本作用概率达到70％时,总体作用概率置信下限约为51.6％。通过该方法能够将所获取的微波效应数据通过同一指标“总体作用概率置信下限”进行有效整理。     

Multiple Intersection Exponents for Planar Brownian Motion

Let p≥2, n ₁≤⋅⋅⋅≤n _p be positive integers and be independent planar Brownian motions started uniformly on the boundary of the unit circle. We define a p-fold intersection exponent ς _p (n ₁,…,n _p ), as the exponential rate of decay of the probability that the packets , i=1,…,p, have no joint intersection. The case p=2 is well-known and, following two decades of numerical and mathematical activity, Lawler et al. (Acta Math. 187:275–308, 2001) rigorously identified precise values for these exponents. The exponents have not been investigated so far for p>2. We present an extensive mathematical and numerical study, leading to an exact formula in the case n ₁=1, n ₂=2, and several interesting conjectures for other cases.     

限进介质固相萃取及其应用

系统地介绍了限进介质固相萃取的原理、特点、发展现状及其发展趋势,并对该技术在生物和环境样品前处理中的应用作了较详细的综述。引用文献58篇。     

初始呼吸子对Sine-Gordon系统动力行为的影响

研究了简谐外力扰动下,计入Peierls-Nabarro力和固体粘性效应,在Neumarm边界条件下杆的运动,这个运动可以用Sine-Gordon型方程来模拟．通过有限差分将无穷维的Sine-Gordon型系统近似为有限维系统．当外力的幅值和初始条件中呼吸子的相位发生变化时,系统的解呈现出丰富的空间结构和时间行为,对于一定的外力幅值和相位,系统具有混沌解．发现初始呼吸子的相位也是影响系统运动状态的重要因素。     

基于小波变换的高斯点扩展函数估计

点扩展函数估计是图像复原的重要内容,目前还没有精确估计的算法。根据小波理论,提出了新的高斯型点扩展函数精确估计算法。算法首先对模糊图像作平滑处理,抑止噪声;然后对图像进行不同尺度小波变换,并分别计算出变换后小波模极大值;再根据推导出的不同尺度下小波模极大值、李氏指数、方差三者之间的关系,准确计算出高斯点扩展函数的方差。实验结果表明,算法的估计精度高,达到了95%左右,具有重要的应用价值。     

电解冷蒸气发生原子荧光法测定痕量汞

以电解冷蒸气发生技术结合原子荧光光谱仪,采用自行设计的圆盘电解池,进行汞的电解还原冷蒸气发生情况的研究.实验表明,铂作为阴极时,Hg的电化学发生响应信号与化学还原法获得的信号强度相当;同时发现,载气引入位置是影响Hg响应信号强度的重要因素.在1.0 mol/L H2SO4作为阴极液及0.8 A的电解电流条件下,Hg的检出限为1.2 ng/L(3σ); 相对标准偏差为1.7%(n=11).利用此体系分析了标准物质及生物样品中的痕量汞,结果满意.     

分散液相微萃取-气相色谱/质谱快速分析水中的硝基苯类化合物

建立了分散液相微萃取.气相色谱,质谱快速分析水中硝基苯、对硝基苯、1,3一二硝基苯和2,4-二硝基氯苯的新方法.将含有18μL氯苯(萃取荆)的0.25 mL丙酮(分散剂)作为萃取体系,快速注入到5.0 mL水溶液中.在4000r/min下离心2.0 min后,得到(10.0±0.5)μL沉积相(氯苯),取底部沉积相1.0μL进行气相色谱,质谱分析.方法线性范围0.5～50μg/L(r2=0.9986～0.9994),检出限0.2～0.5μg/L,相对标准偏差4.2%～7.3%(n=5).将该方法用于环境水样的测定,加标回收率72.9%～89.6%.     

分子印迹固相萃取-液相色谱质谱联用对4种磺酰脲类除草剂残留的测定

采用苄嘧磺隆分子印迹固相萃取柱(MISPE)对加标大米中的苄嘧磺隆、甲磺隆、苯磺隆和烟嘧磺隆4种磺酰脲类除草剂进行净化和富集预处理,并采用LC-MS方法进行定量分析.质谱条件为:正离子检测模式(M+H),检测质量范围为m/z 200 ～800 ,毛细管电压3.93 kV,锥孔电压20 V,脱溶剂温度250 ℃,辅助气流速4 L/min.4种磺酰脲类除草剂在0.01 ～0.70 mg·L~(-1)范围内线性良好.回收率为68% ～100%,表明样品液中的烟嘧磺隆、甲磺隆、苯磺隆和苄嘧磺隆能直接被分子印迹固相萃取柱中的印迹位点保留,而杂质几乎不被保留.分子印迹固相萃取柱对磺酰脲类除草剂表现出良好的识别性能.     

Hollow fiber liquid phase microextraction combined with electrothermal atomic absorption spectrometry for the speciation of arsenic (III) and arsenic (V) in fresh waters and human hair extracts

A new method of hollow fiber liquid phase microextraction (HF-LPME) using ammonium pyrrolidine dithiocarbamate (APDC) as extractant combined with electrothermal atomic absorption spectrometry (ETAAS) using Pd as permanent modifier has been described for the speciation of As(III) and As(V). In a pH range of 3.0-4.0, the complex of As(III)-APDC complex can be extracted using toluene as the extraction solvent leaving As(V) in the aqueous layer. The post extraction organic phase was directly injected into ETAAS for the determination of As(III). To determine total arsenic in the samples, first As(V) was reduced to As(III) by l-cysteine, and then a microextraction method was performed prior to the determination of total arsenic. As(V) assay was based on subtracting As(III) form the total arsenic. All parameters, such as pH of solution, type of organic solvent, the amount of APDC, stirring rate and extraction time, affecting the separation of As(III) from As(V) and the extraction efficiency of As(III) were investigated, and the optimized extraction conditions were established. Under optimized conditions, a detection limit of 0.12 ng mL⁻¹ with enrichment factor of 78 was achieved. The relative standard deviation (R.S.D.) of the method for five replicate determinations of 5 ng mL⁻¹ As(III) was 8%. The developed method was applied to the speciation of As(III) and As(V) in fresh water and human hair extracts, and the recoveries for the spiked samples are 86-109%. In order to validate the developed method, three certified reference materials such as GBW07601 human hair, BW3209 and BW3210 environmental water were analyzed, and the results obtained were in good agreement with the certified values provided.     

Solid-phase extraction combined with dispersive liquid–liquid microextraction for the determination for polybrominated diphenyl ethers in different environmental matrices

An analytical method, solid-phase extraction combined with dispersive liquid–liquid microextration (SPE–DLLME), was established to determine polybrominated diphenyl ethers (PBDEs) in water and plant samples. After concentration and purification of the samples in LC-C18 column, 1.0-mL elution sample containing 22.0 μL 1,1,2,2-tetrachloroethane was injected rapidly into the 5.0-mL pure water. After extraction and centrifuging, the sedimented phase was injected rapidly into gas chromatography with electron-capture detection (GC–ECD). For water samples, enrichment factors (EFs) are in the range of 6838–9405 under the optimum conditions. The calibration curves are linear in the range of 0.1–100 ng L⁻¹ (BDEs 28, 47) and 0.5–500 ng L⁻¹ (BDEs 100, 99, 85, 154, 153). The relative standard deviations (RSDs) and the limits of detection (LODs) are in the range of 4.2–7.9% (n = 5) and 0.03–0.15 ng L⁻¹, respectively. For plant samples, RSDs and LODs are in the range of 5.9–11.3% and 0.04–0.16 μg kg⁻¹, respectively. The relative recoveries of well, river, sea, leachate, and clover samples, spiked with different levels of PBDEs, are 66.8–94.1%, 72.2–100.5%, 74.5–110.4%, 62.1–105.1%, 66.1–91.7%, 62.4–88.9%, and 64.5–83.2%, respectively. The results show that SPE–DLLME is a suitable method for the determination of PBDEs in water and plant samples.