Diameter-dependent thermal-oxidative stability of single-walled carbon nanotubes synthesized by a floating catalytic chemical vapor deposition method

In this paper, purified single-walled carbon naotubes (SWCNTs) with three different diameters were synthesized using a floating catalytic chemical vapor deposition method with ethanol as carbon feedstock, ferrocene as catalyst, and thiophene as growth promoter. The thermal-oxidative stability of different-diameter SWCNTs was studied by using thermal analysis (TG, DTA), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) analysis. The results indicate that small diameter SWCNTs (∼1 nm) are less stable and burn at lower temperature (610 °C), however, the larger diameter SWCNTs (∼5 nm) survive after burning at higher temperature (685 °C), the oxidation rate varies inversely with the tube diameter of SWCNTs, which may be concluded that the higher oxidation-resistant temperature of larger diameter SWCNTs can be attributed to the lower curvature-induced strain by rolling the planar graphene sheet for the larger diameter, so small tubes will become thermodynamically unstable.     

Thermal stability of the cubic phase in Ba0.5Sr0.5Co0.8Fe0.2O3 - δ (BSCF)1

Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3 - δ (BSCF) is a material with excellent oxygen ionic and electronic transport properties reported by many research groups. In its cubic phase, this mixed ionic-electronic conducting (MIEC) perovskite is a promising candidate for oxygen permeation membranes. For this application, its long-term stability under operating conditions (especially temperature and oxygen partial pressure) is of crucial importance.The present work is focused on the thermal stability of the BSCF cubic phase in the targeted temperature range for applications (700…900 °C) in light of previous studies in literature reporting a reversible transition to a hexagonal phase somewhere below 900 °C.To this end, single phase cubic BSCF powders were annealed at different temperatures over varying periods of time. Phase composition was subsequently analysed by X-ray diffractometry (XRD) in order to determine both the temperature limit and the time-scale for the formation of the hexagonal phase. Additionally, the long-term behaviour of the electrical conductivity was examined on bulk samples at 700 °C, 800 °C and 900 °C over several hundreds of hours, showing a prolonged decrease at 800 °C. The decrease in electrical conductivity at this temperature was also examined on bulk samples with different grain sizes, showing a more pronounced decrease the smaller the average grain size.Coexistence of both phases (cubic and hexagonal) could also be shown for 700 °C, however with a different phase equilibrium than at 800 °C.     

Differential equation dynamical system based assessment model in GNSS interoperability

With the development of Global Navigation Satellite System (GNSS),the idea of GNSS interoperability is born and has become the focus of study in the field of satellite navigation.The popularity for GNSS to augment the interoperability with the existing ones necessitates the study of the assessment algorithm of this idea.In this paper,an assessment algorithm for interoperability comprehensive benefits based on the differential equation dynamical system is discussed.There are two important aspects in GNSS tha...     

Stability of trapped Bose-Einstein condensates in one-dimensional tilted optical lattice potential

Using the direct perturbation technique,this paper obtains a general perturbed solution of the Bose-Einstein condensates trapped in one-dimensional tilted optical lattice potential. We also gave out two necessary and sufficient conditions for boundedness of the perturbed solution. Theoretical analytical results and the corresponding numerical results show that the perturbed solution of the Bose-Einstein condensate system is unbounded in general and indicate that the Bose-Einstein condensates are Lyapunov-unstable. However,when the conditions for boundedness of the perturbed solution are satisfied,then the Bose-Einstein condensates are Lyapunov-stable.     

Locking bandwidth and birefringence effects for polarized optical injection in vertical-cavity surface-emitting lasers

The aim of this paper is to investigate the effects of external optical injection taking account of polarization and electron spin properties in vertical-cavity surface-emitting lasers (VCSELs). Using external polarized injection we seek the locked phases and amplitudes of specific polarized fields in terms of injection level and frequency detuning, taking account of two kinds of distinguishable carrier density (spin-up and spin-down). For the conventional form of optical injection without taking account of spin-polarized fields there are three fundamental equations describing the carrier density, field amplitude and phase. However, by using the spin flip model (SFM), the combined effect of polarized fields along two perpendicular crystal axes and electron spin properties results in six equations. We analyse the conditions for stable locking and also the influence of birefringence effects on the stability map of detuning versus optical injection for both cases of injection polarized parallel and perpendicular to the lasing mode of the solitary VCSEL. For given values of pumping and spin relaxation rate there is a minimum birefringence rate for orthogonal injection. Above this value three regions of elliptical polarization are found in the stability map, namely “quasi-stability” (QS), “coupled limit cycle” (CLC) and “coupled chaos” (CC). The three regions of linear polarization, namely chaos, limit cycle and stability, are reduced in area compared to the case of parallel injection. For orthogonal injection it is found that increased birefringence or reduced spin relaxation rate causes the stable locking region to begin at higher injected power and frequency detuning.     

Ageing of Alkylthiol‐Stabilized Gold Nanoparticles

The ageing of spherical gold nanoparticles having 6‐nm‐diameter cores and a ligand shell of dodecanethiol is investigated under different storage conditions. Losses caused by agglomeration and changes in optical particle properties are quantified. Changes in colloidal stability are probed by analytical centrifugation in a polar solvent mixture. Chemical changes are detected by elementary analysis of particles and solvent. Fractionation occurs under all storage conditions. Ageing is not uniform but broadens the property distributions of the particles. Small‐number statistics in the ligand shell density and the morphological heterogeneity of particles are possible explanations. Washing steps exacerbate ageing, a process that could not be fully reversed by excess ligands. Dry storage is not preferable to storage in solvent. Storage under inert argon atmosphere reduces losses more than all other conditions but could not prevent it entirely.     

Thermal stability of amorphous SiOC/crystalline Fe composite

We examined the thermal stability of amorphous silicon oxycarbide (SiOC) and crystalline Fe composite by in situ and ex situ annealing. The Fe/SiOC multilayer thin films were grown via magnetron sputtering with controlled length scales on a surface-oxidized Si (100) substrate. These Fe/SiOC multilayers were in situ or ex situ annealed at temperature of 600 °C or lower. The thin multilayer sample (~10 nm) was observed to have a layer breakdown after 600 °C annealing. Diffusion starts from low groove angle triple junctions in Fe layers. In contrast, the thick multilayer structure (~70 nm) was found to be stable and an intermixed layer (Fe_xSi_yO_z) was observed after 600 °C annealing. The thickness of the intermixed layer does not vary as annealing time goes up. The results suggest that the Fe_xSi_yO_z layer can impede further Fe, Si and O diffusion, and assists in maintaining morphological stability.     

大型固体激光器光束定位稳定性分析

根据 ICF驱动器系统工程的要求 ,建立光学元件运动量与靶点光束定位之间关系 ,对稳定性进行初估。运用 B类评定方法、光线追迹方法和有限元数值模拟方法进行检验和校正 ,使其更具有可行性。并从结构随机振动理论出发 ,将结构用单自由度线性系统的平稳随机振动模拟 ,实现稳定性值激励源的重分。