Using a process-centered approach to minimize the effort of compliance

 The complexity of different quality standards can, in principle, be covered by different approaches and strategies. In-depth process mapping of quality control (QC) work streams was used by the analytical laboratories of Lonza AG to show up the principle differences in being compliant to different quality systems. The results identified two main drivers for all necessary actions: process-related activities and infrastructure-related activities. In addition, a clear indication of the economic impact of these driving forces was gained, which led the laboratories to decide on a process-oriented approach. This approach has the advantage of being able to reflect the different demands of different quality assurance (QA) regulations within the same QC organizational structure. Following the process helps avoid unnecessary efforts in analytical work and represents a very economical approach, at the same time, providing high flexibility to react to different QA or customer demands. Received: 5 July 2002 Accepted: 12 November 2002 Acknowledgements The process-oriented approach resulted from many, very challenging discussions for which I would like to thank the staff of my organization (Analytics & QC), especially, the QA staff and the LIMS team. Presented at Analytica Conference, 23–26 April 2002, Munich, Germany Correspondence to B. Ciommer     

Implementation of a general multireference configuration interaction procedure with analytic gradients in a semiempirical context using the graphical unitary group approach

The graphical unitary group approach has been applied in an efficient implementation of a general multireference configuration interaction (MRCI) method for use with small active molecular orbital spaces in a semiempirical framework. Gradients can be computed analytically for molecular orbitals from a closed-shell or a half-electron open-shell Hartree-Fock calculation. CPU times for single point energy and gradient calculations are reported. The code allows MRCI geometry optimizations of large molecules, as illustrated for the singlet ground state and the four lowest triplet states of fullerene C(76).     

On the influence of nuclear fluctuations on calculated NMR shieldings of benzene and ethylene: a Feynman path integral–ab initio investigation*

The absolute magnetic shieldings of benzene and ethylene have been theoretically studied under the conditions of thermal equilibrium, i.e., under explicit consideration of the nuclear degrees of freedom. For this purpose we have combined the Feynman path integral quantum Monte Carlo (PIMC) formalism with the gauge‐including atomic orbital (GIAO) approach in the Hartree–Fock (HF) approximation. The HF operator has been employed to derive the NMR parameters of the two hydrocarbons via an ensemble averaging over large sets of molecular configurations that are populated in thermal equilibrium. The nuclear fluctuations are responsible for a deshielding of the nuclei relative to the shieldings at the vibrationless minimum of the potential energy surface (PES). The influence of the nuclear degrees of freedom is largest for the isotropic part of the ¹³C shielding tensor. The theoretical results can be explained on the basis of simple geometrical considerations. The bond lengths in thermal equilibrium are larger than the bond lengths at the minimum of the PES. This length enhancement is the prerequisite for a deshielding of the nuclei in thermal equilibrium. The vibrational corrections of the nuclear magnetic resonance (NMR) parameters of benzene and ethylene are quantum driven; classical thermal degrees of freedom of the nuclei are of minor importance. Conceptual problems of theoretical studies of NMR parameters on the basis of a single molecular geometry are emphasized. The influence of the spatial uncertainty of the nuclei becomes decisive in molecules with light atoms. It is pointed out that the combination of the PIMC formalism with electronic Hamiltonians of state‐of‐the‐art quality renders possible accurate determinations of NMR parameters. © 2002 John Wiley & Sons, Inc. Int J Quantum Chem 86: 280–296, 2002     

Osmotic coefficients of vinylic polyelectrolyte solutions without added salt

 The osmotic pressures of –polyelectrolyte solutions without added salt was measured in the concentration ranges 0.001–0.02 and 0.2–1.9 mol kg^-1. Our results show that the osmotic coefficients φ_p were strongly dependent on the chemical structures of polyelectrolyte through the polyion radius and the interaction between the ionic moiety and counterions. The osmotic pressures in polyelectrolyte solutions without added salt, calculated on the basis of the counterion contribution, are in agreement with the experimental results. We conclude that the counterion contribution is dominant in the osmotic pressures and thus, the polymer contribution is negligible in the examined concentration range 0.2–1.9 mol kg^-1. The P–B approach gave a fair prediction of the absolute values of the osmotic pressures with λ=4.5, where λ is the charge density parameter, except for NaPA. In other words, the concentration dependence of the φ_p values can be explained in terms of the counterion contribution. Received: 11 June 1997 Accepted: 19 August 1997     

Preparation and characterization of dendrimer-star PNIPAAM using dithiobenzoate-terminated PPI dendrimer via RAFT polymerization

Two dendritic reversible addition-fragmentation transfer (RAFT) agents with 8 and 16 terminal dithiobenzoate (DTB) groups on the surface of poly(propylene imine) (PPI) dendrimers (generation 2.0 and 3.0, respectively) were successively prepared, and they were used in the RAFT polymerization of N-isopropylacrylamide (NIPAAM). The polymerization kinetics was confirmed to pseudo-first-order behavior. The ¹H NMR and GPC analyses show that the dendrimer-star den (NIPAAM)_x (x = 8 or 16) prepared by RAFT method has well-defined structure, controlled molecular weight and low polydispersities (PDI < 1.3). The aqueous solution prepared from dendrimer-star PNIPAAM showed reversible changes in optical properties: transparent below a lower critical solution temperature (LCST) and opaque above the LCST.     

LMI-Based Delayed Output Feedback Controller Design for a Class of Fractional-Order Neutral-Type Delay Systems Using Guaranteed Cost Control Approach

In this research work, we deal with the stabilization of uncertain fractional-order neutral systems with delayed input. To tackle this problem, the guaranteed cost control method is considered. The purpose is to design a proportional–differential output feedback controller to obtain a satisfactory performance. The stability of the overall system is described in terms of matrix inequalities, and the corresponding analysis is performed in the perspective of Lyapunov’s theory. Two application examples verify the analytic findings.     

Residue and Risk Assessment of Fluopyram in Carrot Tissues

This study describes the variation in residue behavior of fluopyram in soil, carrot root, and carrot leaf samples after the application of fluopyram (41.7% suspension, Bayer) by foliar spray or root irrigation at the standard of 250.00 g active ingredient per hectare (a.i./ha) and double-dose treatment (500.00 g a.i./ha). Fluopyram and its metabolite fluopyram-benzamide were extracted and cleaned up using the QuEChERS method and subsequently quantified with LC-QQQ-MS/MS. The LOD and LOQ of the developed method were in the range of 0.05–2.65 ug/kg and 0.16–8.82 ug/kg, respectively. After root irrigation, the final residues detected in edible parts were 0.60 and 1.80 mg/kg, respectively, when 250.00 and 500.00 g a.i./ha were applied, which is much higher than the maximum residue limit in China (0.40 mg/kg). In contrast, after spray application, most of the fluopyram dissipated from the surface of carrot leaves, and the final residues in carrot roots were both only 0.05 mg/kg. Dietary risk assessments revealed a 23–40% risk quotient for the root irrigation method, which was higher than that for the foliar spray method (8–14%). This is the first report comparing the residue behavior of fluopyram applied by root irrigation and foliar spray. This study demonstrates the difference in risk associated with the two application methods and can serve as a reference for the safe application of fluopyram.     

Coordination Sites for Sodium and Potassium Ions in Nucleophilic Adeninate Contact ion-Pairs: A Molecular-Wide and Electron Density-Based (MOWED) Perspective

The adeninate anion (Ade⁻) is a useful nucleophile used in the synthesis of many prodrugs (including those for HIV AIDS treatment). It exists as a contact ion-pair (CIP) with Na⁺ and K⁺ (M⁺) but the site of coordination is not obvious from spectroscopic data. Herein, a molecular-wide and electron density-based (MOWED) computational approach implemented in the implicit solvation model showed a strong preference for bidentate ion coordination at the N3 and N9 atoms. The N3N9-CIP has (i) the strongest inter-ionic interaction, by −30 kcal mol⁻¹, with a significant (10–15%) covalent contribution, (ii) the most stabilized bonding framework for Ade⁻, and (iii) displays the largest ion-induced polarization of Ade⁻, rendering the N3 and N9 the most negative and, hence, most nucleophilic atoms. Alkylation of the adeninate anion at these two positions can therefore be readily explained when the metal coordinated complex is considered as the nucleophile. The addition of explicit DMSO solvent molecules did not change the trend in most nucleophilic N-atoms of Ade⁻ for the in-plane M-Ade complexes in M-Ade-(DMSO)₄ molecular systems. MOWED-based studies of the strength and nature of interactions between DMSO solvent molecules and counter ions and Ade⁻ revealed an interesting and unexpected chemistry of intermolecular chemical bonding.     

Dissipation and Residue of Metalaxyl-M and Azoxystrobin in Scallions and Cumulative Risk Assessment of Dietary Exposure to Hepatotoxicity

Metalaxyl-M and azoxystrobin have been used to control various fungal diseases on scallion and other crops. In view of the adverse toxic effects of both on the mammalian liver, it is necessary to conduct a cumulative risk assessment of their dietary exposure to consumers. The residues of metalaxyl-M and azoxystrobin on scallion were determined by a quick, easy, cheap, effective, rugged, and safe method (QuEChERS) combined with high-performance liquid chromatography tandem mass spectrometry (LC-MS/MS). The half-lives were about 1.15 and 3.89 days, respectively, and the final residues after a seven-day harvest interval were <0.001–0.088 mg/kg and 0.190–4.687 mg/kg, respectively. The cumulative dietary risk quotient of the two fungicides to Chinese consumers calculated by the probability model is 13.94%~41.25%. According to the results of the contribution analysis, the risk posed by azoxystrobin is much greater than that of metalaxyl-M. Although metalaxyl-M and azoxystrobin do not pose a cumulative risk to Chinese consumers, the risk to children and adolescents is significantly higher than that to adults. This suggests that in future research, more consideration should be given to the cumulative risk of compounds to vulnerable groups.     

Pesticide Residues in Vegetables and Fruits from Farmer Markets and Associated Dietary Risks

The use of pesticides leads to an increase in agricultural production but also causes harmful effects on human health when excessively used. For safe consumption, pesticide residues should be below the maximum residual limits (MRLs). In this study, the residual levels of pesticides in vegetables and fruits collected from farmers’ markets in Sharkia Governorate, Egypt were investigated using LC-MS/MS and GC-MS/MS. A total number of 40 pesticides were detected in the tested vegetable and fruit samples. Insecticides were the highest group in detection frequency with 85% and 69% appearance in vegetables and fruits, respectively. Cucumber and apple samples were found to have the highest number of pesticide residues. The mean residue levels ranged from 7 to 951 µg kg⁻¹ (in vegetable samples) and from 8 to 775 µg kg⁻¹ (in fruit samples). It was found that 35 (40.7%) out of 86 pesticide residues detected in vegetables and 35 (38.9%) out of 90 pesticide residues detected in fruits exceeded MRLs. Results for lambda-cyhalothrin, fipronil, dimothoate, and omethoate in spinach, zucchini, kaki, and strawberry, respectively, can cause acute or chronic risks when consumed at 0.1 and 0.2 kg day⁻¹. Therefore, it is necessary for food safety and security to continuously monitor pesticide residues in fruits and vegetables in markets.