Individual determination of ortho and non-ortho substituted polychlorobiphenyls (PCBs) in sediments by high performance liquid chromatographic pre-separation and gas chromatography/ECD detection

Summary An analytical procedure for the individual determination of ortho and non-ortho PCB congeners in sediments, using high performance liquid chromatography (HPLC) preseparation and gas chromatography/ECD detection, is described. Gas chromatography/FTIR spectrometry (GC/FTIR) and gas chromatography/mass spectrometry (GC/MS) were employed for individual congener identification and determination. Sample extraction, clean-up of extract and selective elution procedures were optimized by using reference certified marine sediment samples. Recovery and precision were typically 83% and 16% respectively at 2 ng/g of total PCB content. The proposed procedure, tested by analyzing real sediment samples, showed a reproducibility better than 20% at 13 ng/g PCB level.     

Identification of low molecular weight proteins isolated by 2-D liquid separations

Proteins with molecular mass (M(r)) <20 kDa are often poorly separated in 2-D sodium dodecyl sulfate polyacrylamide gel electrophoresis. In addition, low-M(r) proteins may not be readily identified using peptide mass fingerprinting (PMF) owing to the small number of peptides generated in tryptic digestion. In this work, we used a 2-D liquid separation method based on chromatofocusing and non-porous silica reversed-phase high-performance liquid chromatography to purify proteins for matrix-assisted laser desorption/ionization time-of-flight mass spectrometric (MALDI-TOFMS) analysis and protein identification. Several proteins were identified using the PMF method where the result was supported using an accurate M(r) value obtained from electrospray ionization TOFMS. However, many proteins were not identified owing to an insufficient number of peptides observed in the MALDI-TOF experiments. The small number of peptides detected in MALDI-TOFMS can result from internal fragmentation, the few arginines in its sequence and incomplete tryptic digestion. MALDI-QTOFMS/MS can be used to identify many of these proteins. The accurate experimental M(r) and pI confirm identification and aid in identifying post-translational modifications such as truncations and acetylations. In some cases, high-quality MS/MS data obtained from the MALDI-QTOF spectrometer overcome preferential cleavages and result in protein identification.     

A comparison of electron ionization mass spectra obtained at 70 eV,low electron energies,and with cold EI and their NIST library identification probabilities

Electron ionization (EI) mass spectra of 46 compounds from several different compound classes were measured. Their molecular ion abundances were compared as obtained with 70‐eV EI, with low eV EI (such as 14 eV), and with EI mass spectra of vibrationally cold molecules in supersonic molecular beams (Cold EI). We further compared these mass spectra in their National Institute of Standards and Technology (NIST) library identification probabilities. We found that

1. Low eV EI is not a soft ionization method, and it has little or no influence on the molecular ion relative abundances for large molecules and those with weak or no molecular ions.
2. Low eV EI for compounds with abundant or dominant molecular ions in their 70 eV mass spectra results in the reduction of low mass fragment ions abundances thereby reducing their NIST library identification probabilities thus rarely justifies its use in real‐world applications.
3. Cold EI significantly enhances the relative abundance of the molecular ions particularly for large compounds; yet, it retains the low mass fragment ions; hence, Cold EI mass spectra can be effectively identified by the NIST library.
4. Different standard EI ion sources provide different 70 eV EI mass spectra. Among the Agilent technologies ion sources, the “Extractor” exhibits relatively abundant molecular ions compared with the “Inert” ion source, while the “High efficiency source” (HES) provides mass spectra with depleted molecular ions compared with the “Inert” ion source or NIST library mass spectra.

These conclusions are demonstrated and supported by experimental data in nine figures and two tables.     

Application of diode array detectors for solute identification in toxicological analysis

Summary The possibilities and limitation of automated solute identification via UV/VIS spectroscopy in HPLC are demonstrated and applications in toxicologic analysis are described. A standard isocratic system is used. The influence of various chromatographic parameters on retention time is shown. A retention time window of ±15% is required. In addition to retention time, derived spectral data are calculated (minima and maxima of derivatives, area counts under standardized spectral ranges, absorption at various wavelength) and used for positive solute identification. It is possible to identify solutes with a high degree of certainty in urine and plasma if their concentration is at least 10 ppm.     

Structure-activity relationship of Ca2+ channel blockers: A study using conformational analysis and chemometric methods

Summary A structure-activity relationship study has been done on 8 compounds with the activity known as Ca²⁺ channel blockers. Conformational analysis was carried out using a molecular mechanics method. The 3D-QSAR approach was used and the most polar functional groups present in all the molecules were considered. Eight interatomic distances are necessary to define the relative spatial disposition of these relevant molecular fragments. The structure-activity relationship between interatomic distances and biological activity was performed using statistic and chemometric methods. In particular, with Principal Component Analysis, it was possible to reduce the number of interatomic distances: only six of the eight distances are sufficient to describe the system in a useful way. A classification method was iteratively used to select the most probable conformations linked to the biological activity and to build a model able to classify conformations according to their biological behaviour. Cluster analysis on the active selected conformations subsequently allowed the identification of two different geometrical patterns for the active compounds. Finally the validity of the model was verified by correctly predicting the activity of other molecules not used in the construction of the model but possessing known activity.     

Photolysis of 2-dialkylamino-3-amino(or alkylamino)-1,4-naphthoquinones

Using¹H and¹³C NMR spectroscopy, naphthodihydroimidazolediols were identified as the primary products of photolysis of 2-dialkylamino-3-amino(alkylamino)-1,4-naphthoquinones. Their further non-photochemical (thermal) transformations depend on their structure and on the photolysis conditions.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 358–362, February, 1993.     

Impact of biological factors on binding media identification in art objects: identification of animal glue in the presence of Aspergillus niger

The materials and especially organic materials used for creation of art objects can be utilized by various microorganisms for their growth and facilitate the microbial colonization of the object. An understanding of the chemical alterations in artefacts caused by the presence of microorganisms can be crucial for correct identification of the materials initially used for the artefact creation--nowadays an important step in restoration and/or art-historical investigation of the art object. The present article describes a model experiment in which we investigated the possible chemical alterations in animal glue films used as substrate for growth of the fungus Aspergillus niger. The sterilized animal glue solution was poured into Petri dishes, inoculated with Aspergillus niger, and subsequently incubated at 15 degrees C for 0, 7, 9, 14, and 28 days. After interruption of incubation, the content of the Petri dish was analyzed for amino acid composition by the GC-MS based method. It was found that the growth of Aspergillus niger on animal glue films did not cause significant changes in the amino acid composition of the film and had no impact on animal glue identification.     

Residue and Risk Assessment of Fluopyram in Carrot Tissues

This study describes the variation in residue behavior of fluopyram in soil, carrot root, and carrot leaf samples after the application of fluopyram (41.7% suspension, Bayer) by foliar spray or root irrigation at the standard of 250.00 g active ingredient per hectare (a.i./ha) and double-dose treatment (500.00 g a.i./ha). Fluopyram and its metabolite fluopyram-benzamide were extracted and cleaned up using the QuEChERS method and subsequently quantified with LC-QQQ-MS/MS. The LOD and LOQ of the developed method were in the range of 0.05–2.65 ug/kg and 0.16–8.82 ug/kg, respectively. After root irrigation, the final residues detected in edible parts were 0.60 and 1.80 mg/kg, respectively, when 250.00 and 500.00 g a.i./ha were applied, which is much higher than the maximum residue limit in China (0.40 mg/kg). In contrast, after spray application, most of the fluopyram dissipated from the surface of carrot leaves, and the final residues in carrot roots were both only 0.05 mg/kg. Dietary risk assessments revealed a 23–40% risk quotient for the root irrigation method, which was higher than that for the foliar spray method (8–14%). This is the first report comparing the residue behavior of fluopyram applied by root irrigation and foliar spray. This study demonstrates the difference in risk associated with the two application methods and can serve as a reference for the safe application of fluopyram.     

A Collection of Molecular Fingerprints of Single Aerosol Particles in Air for Potential Identification and Detection Using Optical Trapping-Raman Spectroscopy

Characterization, identification, and detection of aerosol particles in their native atmospheric states remain a challenge. Recently, optical trapping-Raman spectroscopy (OT-RS) has been developed and demonstrated for characterization of single, airborne particles. Such particles in different chemical groups have been characterized by OT-RS in recent years and many more are being studied. In this work, we collected single-particle Raman spectra measured using the OT-RS technique and began construction of a library of OT-RS fingerprints that may be used as a reference for potential detection and identification of aerosol particles in the atmosphere. We collected OT-RS fingerprints of aerosol particles from eight different categories including carbons, bioaerosols (pollens, fungi, vitamins, spores), dusts, biological warfare agent surrogates, etc. Among the eight categories, spectral fingerprints of six groups of aerosol particles have been published previously and two other groups are new. We also discussed challenges, limitations, and advantages of using single-particle optical trapping-Raman spectroscopy for aerosol-particle characterization, identification, and detection.     

Dissipation and Residue of Metalaxyl-M and Azoxystrobin in Scallions and Cumulative Risk Assessment of Dietary Exposure to Hepatotoxicity

Metalaxyl-M and azoxystrobin have been used to control various fungal diseases on scallion and other crops. In view of the adverse toxic effects of both on the mammalian liver, it is necessary to conduct a cumulative risk assessment of their dietary exposure to consumers. The residues of metalaxyl-M and azoxystrobin on scallion were determined by a quick, easy, cheap, effective, rugged, and safe method (QuEChERS) combined with high-performance liquid chromatography tandem mass spectrometry (LC-MS/MS). The half-lives were about 1.15 and 3.89 days, respectively, and the final residues after a seven-day harvest interval were <0.001–0.088 mg/kg and 0.190–4.687 mg/kg, respectively. The cumulative dietary risk quotient of the two fungicides to Chinese consumers calculated by the probability model is 13.94%~41.25%. According to the results of the contribution analysis, the risk posed by azoxystrobin is much greater than that of metalaxyl-M. Although metalaxyl-M and azoxystrobin do not pose a cumulative risk to Chinese consumers, the risk to children and adolescents is significantly higher than that to adults. This suggests that in future research, more consideration should be given to the cumulative risk of compounds to vulnerable groups.