On stabilizing volatile product returns

As input flows of secondary raw materials show high volatility and tend to behave in a chaotic way, the identification of the main drivers of the dynamic behavior of returns plays a crucial role. Based on a stylized production-recycling system consisting of a set of nonlinear difference equations, we explicitly derive parameter constellations where the system will or will not converge to its equilibrium. Using a constant elasticity of substitution production function, the model is then extended to enable coverage of real world situations. Using waste paper as a reference raw material, we empirically estimate the parameters of the system. By using these regression results, we are able to show that the equilibrium solution is a Lyapunov unstable saddle point. This implies that the system is sensitive on initial conditions that will hence impede the predictability of product returns. Small variations of production input proportions could however stabilize the whole system.     

N‐glycosylation approach to glucose‐functionalized diamine and its use for protection‐free synthesis of polyurea bearing glucoside pendant

A glucose‐functionalized diamine was prepared and used as a new monomer for polyurea synthesis. The diamine was prepared by N‐glycosylation of 1,6‐hexamethylenediamine with D ‐glucose. Upon adding diisocyanates to the diamine, isocyanate reacted selectively with the amino groups, not with the hydroxyl groups of the glucose‐derived structure, to give the corresponding polyureas. The polyureas exhibited highly hydrophilic nature due to the presence of the glucose‐derived side chain. A ternary system consisting of the glucose‐functionalized diamine, piperazine, and diisocyanate gave the corresponding polyureas, where content of the glucose‐derived moiety was tunable by feed ratio between the diamine and piperazine. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Tuning the frontier molecular orbital energy levels of n‐type conjugated copolymers by using angular‐shaped naphthalene tetracarboxylic diimides,and their use in all‐polymer solar cells with high open‐circuit voltages

An angular‐shaped naphthalene tetracarboxylic diimide (NDI) was designed and synthesized as a new building block for n‐type conjugated polymers to tune their energy levels. Three n‐type copolymers incorporating this angular‐shaped NDI as the acceptor moiety were obtained by Stille coupling reactions and had number average molecular weights of 18.7–73.0 kDa. All‐polymer bulk‐heterojunction solar cells made from blends of these polymers with poly(3‐hexylthiophene) gave a power conversion efficiency up to 0.32% and exhibited an open‐circuit voltage (V_oc) up to 0.94 V due to their relative high‐lying lowest unoccupied molecular orbital energy levels. The high V_oc of 0.94 V is higher than that of solar cells based on linear‐shaped NDI‐containing polymers (<0.6 V). The results indicate that the angular‐shaped NDI is a promising building block for constructing nonfullerene polymer acceptors for solar cells with high open‐circuit voltages. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Biobased polyurethanes from polyether polyols obtained by ionic‐coordinative polymerization of epoxidized methyl oleate

A series of poly(ether urethane) networks were synthesized from polyether polyols obtained by ionic‐coordinative polymerization of epoxidized methyl oleate (EMO) using 4,4′‐methylenebis(phenyl isocyanate) or l ‐lysine diisocyanate as coupling agents. Moreover, a variety of segmented poly(ether urethane) networks with different hard segment contents were obtained using 1,3‐propanediol as the chain extender. The materials were characterized by differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical thermal analysis, and tensile properties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Unsaturated,biobased polyesters and their cross‐linking via radical copolymerization

Biobased, unsaturated polyesters derived from isosorbide, maleic anhydride, and succinic acid were synthesized and characterized. The presence of maleic anhydride units in the structure of the polyesters allowed converting them into cured coatings by radical copolymerization with crosslinking agents such as 2‐hydroxyethyl methacrylate, N‐vinyl‐2‐pyrrolidinone, acrylic acid or methacrylamide. The investigated polyesters were obtained via bulk polycondensation, catalyzed by titanium(IV) n‐butoxide. 2D NMR and MALDI‐Tof‐MS spectroscopy proved that this polymerization resulted in isomerization of maleic acid units into fumaric ones and in the formation of slightly branched structures by the reaction of isosorbide (end) groups with main chain unsaturated bonds. Moreover, some double bonds proved to have reacted with the condensation by‐product water. The resulting polyesters displayed the expected correlation between variables such as molecular weight and content of unsaturated bonds and their T_g values. Since the thermal properties of the obtained polyesters were appropriate for coating applications, the polymers were crosslinked with unsaturated monomers by radical copolymerization. The crosslinking process was studied using FTIR spectroscopy and by measurements of the soluble part of the cured coatings. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2885–2895, 2010     

Soy-oil-based segmented polyurethanes

Segmented polyurethanes were prepared from soy polyol, diphenyl methane diisocyanate (MDI), and ethylene glycol or butane diol as chain extenders. Samples were prepared with true hard-segment concentrations (HSC) of about 0, 10, and 40%. Both the soft MDI–polyol and hard MDI/diol segments are glassy at room temperature. These samples were also crosslinked through the polyfunctional polyol soft segment. Partial crystallinity and phase separation were detected in samples with 40% HSC, on the basis of DSC data. Small-angle X-ray scattering shows the existence of phase separation with domain sizes of about 10 nm in the 40% HSC samples, but not in the others. The distribution of domain sizes is considerably broader for the ethylene-glycol extended system compared with that for the butane-diol case. Although the presence of hard segments lowers the crosslink density, samples with higher HSC had higher glass transition temperatures, higher strengths, higher moduli, lower swelling, lower elongation at break, and lower impact strengths. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3178–3190, 2005     

Decision making in a fuzzy environment and its application to multicriteria power engineering problems

This paper presents results of research into the use of the Bellman–Zadeh approach to decision making in a fuzzy environment for solving multicriteria optimization problems. Its application conforms to the principle of guaranteed result and provides constructive lines in obtaining harmonious solutions on the basis of analyzing associated maxmin problems. The use of the Bellman–Zadeh approach has served as a basis for solving a problem of multicriteria allocation of resources (or their shortages) and developing a corresponding adaptive interactive decision making system (AIDMS1). AIDMS1 includes procedures for considering linguistic variables to reflect conditions that are difficult to formalize as well as procedures for constructing and correcting vectors of importance factors for goals. The use of these procedures permits one to realize an adaptive approach to processing information of a decision maker to provide successive improvment in solution quality. The results of the paper are universally applicable and are already being used to solve power engineering problems. It is illustrated by considering problems of multicriteria power and energy shortage allocation and multicriteria power system operation.     

NUMERICAL METHOD AND APPLICATION FOR THREEDIMENSIONAL NONLINEAR SYSTEM OF DYNAMICS OF FLUIDS IN POROUS MEDIA

For the system of multilayer dynamics of fluids in porous media, the second order upwind finite difference fractional steps schemes applicable to parallel arithmetic are put forward. Some techniques, such as calculus of variations, energy method, multiplicative commutation rule of difference operators, decomposition of high order difference operators and prior estimates are adopted. Optimal order estimates are derived to determine the error in the second order approximate solution. These methods have already been applied to the numerical simulation of migration-accumulation of oil resources.