Size ramsey numbers of stars versus 4‐chromatic graphs

We investigate the asymptotics of the size Ramsey number î(K_1,nF), where K_1,n is the n‐star and F is a fixed graph. The author 11 has recently proved that r?(K_1,n,F)=(1+o(1))n² for any F with chromatic number χ(F)=3. Here we show that r?(K_1,n,F)≤ n²+o(n²), if χ (F) ≥ 4 and conjecture that this is sharp. We prove the case χ(F)=4 of the conjecture, that is, that r?(K_1,n,F)=(4+o(1))n² for any 4‐chromatic graph F. Also, some general lower bounds are obtained. © 2003 Wiley Periodicals, Inc. J Graph Theory 42: 220–233, 2003     

An experimental study of the merging probability of double buoyancy-controlled jet flame

This article presents an experimental investigation on the merging probability of buoyancy-controlled jet flames. Two rectangular jet nozzles with different aspect ratios and heat release rates were studied in the open space. The nozzles of the same area with dimensions of 1.5 × 24, 3 × 12, and 6 × 6 mm were used in this article. It is found that the merging probability increases with the heat release rate and decreases with the space between these two nozzles. A model to predict the merging probability has been developed, which is proportional to a dimensionless parameter linearly within a certain scope.     

Ellipticity of the Linearly Polarized He-Ne Laser Radiation Reflected by the Leaves of Plants

The phenomenon of elliptical polarization of the linearly polarized radiation reflected near the Brewster angle by the leaves of plants has been investigated. It has been shown that the appearance of ellipticity is associated with the complex structure of the cuticle.__________Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 72, No. 2, pp. 236–240, March–April, 2005.     

原子核阻止是核子–核子碰撞截面的可能探针

利用同位旋相关的输运理论,研究了不同中子–质子比的碰撞系统在中能重离子碰撞过程中,原子核阻止的同位旋效应及其对束流能量和碰撞参数的依赖性.计算表明对于所研究的4个碰撞系统,在从费米能附近到大约150MeV/u的较宽入射能量范围内,近心碰撞的原子核阻止强烈地依赖于核子–核子碰撞截面的同位旋相关性,而对称势对它的影响并不明显.故原子核阻止是提取介质中核子–核子碰撞截面的灵敏探针.研究还表明动量相关势对原子核阻止的重要作用是不可忽略的.     

光源偏振度对光纤陀螺零漂影响的研究

以Y波导集成光学调制器保偏型干涉式光纤陀螺作为研究对象,根据各光学元器件的参数建立了各器件的琼斯矩阵以及光路传输模型,在此基础上进行了光路偏振误差的理论分析。通过推导,得到了保偏型干涉式光纤陀螺的偏振误差表达式,并首次分析了光源偏振度对光纤陀螺零漂的影响。借助光源尾纤输出的光谱,对由0%~3%之间呈线性变化的偏振度以及对经实验测试的光源偏振度的实际值引起的偏振模式耦合误差的零漂值进行了仿真计算。结果表明,当光路中其它参数不变时,由光源偏振度变化引起的零漂值为0.001°/h,满足了高精度光纤陀螺的精度要求。     

理想气体吸热和放热的讨论

根据热力学第一定律和理想气体状态方程推导了理想气体的热容量公式,并对理想气体在p-V图上的直线过程和循环过程的温度变化及吸热和放热进行了讨论.     

An in vitro controlled release study of valproic acid encapsulated in a titania ceramic matrix

Despite the therapeutic efficacy of valproic acid towards numerous diseases, its poor bioavailability and systemic side effects pose significant barriers to long term treatment. In order to take advantage of controlled release implants of valproic acid, the drug was encapsulated into titania ceramic matrices via a sol-gel process. The integrity and structure of valproic acid-containing matrices were characterized through the use of FESEM, TEM, and BET analyses. In vitro controlled release studies and kinetic analyses were performed under ambient conditions (25 °C, atmospheric pressure) and controlled release behaviors were studied using a GC-MS method. Results showed first order dependence in the rate of valproic acid release as a function of drug concentrations in the titania ceramic device. A marked dependence on the surface area and pore size distribution with drug loading was also observed. This research opens new possibilities for the design of novel time-delayed controlled release systems for valproic acid encapsulates.     

金属Bi的卸载熔化实验研究

在火炮上利用金属铋(Bi)直接撞击单晶LiF窗口, 开展了金属Bi反向碰撞的冲击加载-卸载实验研究, 实验采用激光位移干涉测试系统, 获得了金属Bi在11—16 GPa压力范围内完整的卸载粒子速度剖面. 实验结果结合特征线方法计算表明, 金属Bi经冲击加载进入体心立方相, 并在11—16 GPa冲击压力作用下发生了卸载熔化, 界面粒子速度剖面的卸载拐点, 对应着金属Bi经冲击加载后发生的卸载熔化, 而这一结论同Cox的理论计算及一维流体力学程序计算结果基本一致. 本文报道的金属Bi卸载波剖面解读技术, 对于认识冲击加载下其他相似材料相变具有实用价值.     

Evaluation of the mechanical properties of PMC interface using slice compression test — Analysis of transfer mechanism of interfacial shear stress

Properties of the fiber/matrix interface in SiO₂/epoxy and SiC/epoxy composite are investigated using the slice compression test (SCT) for the single fiber, where the specimen is loaded and unloaded between a plate which has different mechanical properties. It is found that the interfacial debonding proceeds from the polished surface at a soft plate side and that the fiber protrusion occurs after unloading. The fiber-protrusion length is directly measured at each applied stress level using a scanning electron microscope. Interfacial shear-sliding stress is obtained based on the constant shear-sliding stress analysis employing the obtained protrusion length. It is demonstrated that the value of interfacial shear-sliding stress shows good agreement with that obtained from another technique, the push-out test, on the same system. The relation between the fiber-protrusion length and applied stress is proportional to a certain extent. From this result, it is analytically pointed out that the applied stress has a limiting value in this SCT because of Poisson's effect. Also, two interfacial debonding criteria, which are determined analytically for the PMC, are discussed.     

超声波对合成介孔材料Al-MCM-41的有序度的影响

在超声频率为20 kHz,电功率为500 W的超声波作用下,分别以Al（NO₃）₃和Al₂ （SO₄）₃做铝源合成了具有不同Si/Al比的Al-MCM-41。XRD结果显示,尽管超声波作用下,掺杂杂原子Al也要降低介孔材料的有序度,但其有序度降低的程度比普通水热法要小,超声波的辅助可以在同样反应时间内得到比普通水热法具有更高有序度的Al-MCM-41,即在掺杂过程中,超声波要比普通搅拌有利于介孔材料保持其骨架稳定性。此外考察了超声波作用时间对产品有序度和粒度的影响。