近断层地震作用下钢筋混凝土连续梁桥地震易损性分析

考虑桥墩、支座构件及主梁的碰撞损伤指标,对钢筋混凝土连续梁桥进行了地震易损性分析.综合考虑了结构参数的不确定性,从太平洋地震工程研究（Paciflc earthquake engineering research,PEER）数据库中随机选取了20条近场地震记录,得到大量的随机地震-结构样本.结合不同破坏状态下的桥梁损伤指标,根据结构的能力与需求得到了桥梁各构件及整体桥梁结构的地震易损性曲线.从概率意义上判断在强烈地震作用下桥梁结构所处的破坏状态,为今后在役的同类型桥梁震害预测提供了参考.     

AZ91镁合金及其Al2O3纤维-石墨颗粒混杂增强复合材料的滑动摩擦磨损性能研究

利用挤压铸造法制备了单-A12O3短纤维增强及A12O3短纤维一石墨(Gr)颗粒混杂增强AZ91镁合金复合材料，考察了镁合金及其复合材料的滑动摩擦磨损性能．结果表明，复合材料的耐磨性能优于基体合金，其中单一A12O3短纤维增强复合材料的耐磨性能更优，而混杂Gr颗粒的复合材料在磨损表面不能形成自润滑薄膜，故不能改善镁基复合材料在滑动干摩擦条件下的摩擦磨损性能．基体合金和单一A12O3短纤维增强复合材料的主要磨损机制为犁削磨损，而A12O3-Gr颗粒混杂增强复合材料的主要磨损机制为犁削和剥层破坏．     

High temperature creep behaviour of an FeAl intermetallic strengthened by nanoscale oxide particles

The creep behaviour of an FeAl intermetallic strengthened by nanosized oxide particles has been examined at temperatures of 700–825 °C. For all temperatures the strain rate shows a power law dependence on the applied stress. At the lowest temperature and with the highest stresses there is evidence of a threshold stress produced by the difficulty of overcoming the particle barriers, while for higher temperatures as well as at low stresses there is no threshold stress and creep appears to be controlled by general climb. The fine oxide particles produce good strengthening at low temperatures but are more readily overcome at high temperatures due to their very small size and limited attractive relaxation force. Despite such fall in creep strength, this material remains one of the strongest iron aluminides to the temperature range evaluated.     

铝基复合材料高速干摩擦行为的遗传神经网络预测模型

对4种SiC颗粒增强铝基复合材料在5种速度和4种压力条件下进行了销-盘摩擦磨损试验,运用遗传神经网络技术建立了铝基复合材料在高速干滑动过程中的摩擦行为预报模型,并用该模型对铝基复合材料进行预报.结果表明,蓄热能力较大的铝基复合材料在服役条件下具有较高的摩擦系数,与实际情况相一致.用遗传神经网络建立的铝基复合材料摩擦行为预测模型为服役条件下提供了简便、可靠的优选材料方法.     

强冲击载荷作用下钢筋混凝土本构关系的研究

基于复合材料细观思想,通过研究钢筋混凝土代表性体积单元,提出了理想情况下钢筋混凝土本构关系可由混凝土材料粘弹性本构关系与一个依赖于增强钢筋材料特性的常量G的乘积确定的思想;假设损伤只发生在混凝土材料内部,并给出了一般的损伤演化方程.由此得到了单向加筋、正交双向加筋和正交三向加筋混凝土的损伤型动态本构关系.数值拟合表明,理论预示曲线与试验结果曲线吻合良好.     

玻璃纤维增强聚氨酯泡沫塑料的压缩力学性能研究

本文研究了两种不同密度的玻璃纤维增强聚氨酯泡沫塑料在准静态压缩下的力学性能。给出了与相应密度的普通泡沫塑料力学性能的比较，实验结果表明：两种增强泡沫塑料在压缩载荷作用下，具有不同于普通泡沫塑料的应力－应变特性，压缩模量和强度一般均有不同程度的提高，而且对相同纤维含量的增强泡沫塑料来说，密度较高的材料增强效果较好。     

钢纤混凝土裂纹尖端应变场的实验研究

本文应用散斑干涉技术在四组含纤量分别为０，０．５％，１％，１．５％的钢纤混凝土三点弯曲裂纹试件的裂纹尖端位移场进行了测试，并换算为应变场。对钢纤混凝土开裂的基理进行了探讨；验证了最大位应变准则；并测定断裂韧度Ｊｉｃ．     

Rheology/morphology/flow conditions relationships for polymethylmethacrylate/rubber blend

Viscoelastic behavior, phase morphology and flow conditions relationships in polymer/rubber blends have been investigated. The importance of such correlations is illustrated on polymethylmethacrylate (PMMA)/rubber blends subjected to different flow conditions both under small and large deformations. In small-amplitude oscillatory shear (the morphology does not change during the flow) the elastic modulus G of the concentrated blends shows a secondary plateau, G _p , in the low frequency region. This solid-like behavior appears for rubber particle contents beyond the percolation threshold concentration (15%). Morphological observations revealed that for concentrations higher than 15%, the particles are dispersed in a three-dimensional network-type structure.In capillary flow it was found that the network-type structure was destroyed and replaced by an alignment of particles in the flow direction. This morphological modification resulted in a decrease in both viscosity and post-extrusion swell of the blends. Morphological observations revealed that the ordered structure in the flow direction was concentrated only in the skin region of the extrudate, where the shear stress is higher than the secondary plateau, G _p . A simple kinetic mechanism is proposed to explain the observed morphology.Similarly, steady shear measurements performed in the cone-and-plate geometry revealed alignment of particles in the flow direction for shear stress values higher than G_p.Presented in part at the Symposium Recent Developments in Structured Continua Montréal (Canada) 26–28 May 1993 and at the 45th Canadian Chemical Engineering Conference, Quebec, October 15–18 (1995)     

聚氨酯泡沫塑料压缩杨氏模量的理论预测

通过微分法导出了泡沫塑料剪切模量和体积模量所满足的微分方程组，再利用联系泡沫塑料泊松比和孔隙比的Ｋｅｒｎｅｒ－Ｒｕｓｃｈ经验关系及泡沫塑料弹性常数间满足足的关系，在基体材料不可压缩的假设下，确定了泡沫塑料的杨氏模量。本文针对几种密度的泡沫塑料，分别对它们的杨氏模量进行了理论预测和实验测定，结果表明：理论预测的模量在较高密度下与实验符合的很好，在低密度下也给出相当好的近似值。此外，本文的结果同其他理     

钢筋混凝土框架结构的单参数破坏反演

本文运用一维搜索法对钢筋混凝土框架结构的破坏进行了单参数反演,由观测到的破坏状态－－塑性铰形成次序、位置及位移值,反演钢筋混凝土结构中的钢筋的生一Ｅｓ、配筋面积ＡＳ及混凝土桔等。