LapRLSR for NIR spectral modeling and its application to online monitoring of the column separation of Salvianolate

A novel near infrared (NIR) modeling method—Laplacian regularized least squares regression (LapRLSR) was presented, which can take the advantage of many unlabeled spectra to promote the prediction performance of the model even if there are only few calibration samples. Using LapRLSR modeling, NIR spectral analysis was applied to the online monitoring of the concentration of salvia acid B in the column separation of Salvianolate. The results demonstrated that LapRLSR outperformed partial least squares (PLS) significantly, and NIR online analysis was applicable.     

基于“标准-3”动能拦截弹的顺轨拦截方法研究

提出了针对大气层外机动目标的顺轨拦截方法,能够大幅度降低目标与拦截器之间的相对速度,缓和拦截器的过载需求,避免脱靶现象。采用“标准-3”拦截弹的公开参数建立数学模型,对大气层外机动弹头的顺轨拦截过程进行了仿真研究,仿真综合考虑了助推器和拦截器的质量变化、末制导初始对准误差、导引头的测量误差和盲区、动力学系统的响应延迟和过载约束。结果表明,在处于速度劣势的情况下,拦截器能够对机动目标进行精准碰撞,验证了顺轨拦截方法的工程实践意义。     

Stripping Analysis of Trace Metals at a Flow-Through Reticulated Vitreous Carbon Electrode after the Preconcentration by Supported Liquid Membrane Technique

Abstract

The performance of a flow-through mercury coated reticulated vitreous carbon (RVC) electrode in the potentiometric stripping analysis (PSA) of trace metals has been examined. A wall-jet glassy carbon cell was used for the comparative experiments. Experimental parameters influencing the stripping signals have been optimised in order to use the stripping analysis after the preconcentration and matrix isolation by supported liquid membrane (SLM) technique. The SLM with di-2-ethylhexyl-phosphoric acid (DEHPA) as the extractant in the membrane liquid for proton driven transport of trace metals across the membrane has been chosen. Results presented for lead determination in river water demonstrate the analytical advantages of coupled technique SLM-PSA.     

Programmed Temperature Vaporization Injection (PTV) in the Analysis by Gas Chromatography-Mass Spectrometry (GC-MS) of the Constituents of Landfill Gas

Abstract

Trace volatile compounds emitted from both domestic and industrial landfills have been identified by programmed temperature vaporization injection (PTV) coupled to gas chromatography with detection by ion-trap mass spectrometry (GC-ITD/MS). The PTV injection system has been developed using a combination of two six-port valves to achieve problems of interference in GC-MS while loading sample. A large volume of landfill gas was re-concentrated onto a sorbent trap, then rapidly liberated into the GC-ITD/MS system by programmed thermal desorption. Using this method, trace volatile compounds in gases from both domestic and industrial landfills such as aromatic hydrocarbons, terpenes, chlorinated hydrocarbons, and sulfur compounds can be identified and quantified.     

Unsupervised cell identification on multidimensional X‐ray fluorescence datasets

A novel approach to locate, identify and refine positions and whole areas of cell structures based on elemental contents measured by X‐ray fluorescence microscopy is introduced. It is shown that, by initializing with only a handful of prototypical cell regions, this approach can obtain consistent identification of whole cells, even when cells are overlapping, without training by explicit annotation. It is robust both to different measurements on the same sample and to different initializations. This effort provides a versatile framework to identify targeted cellular structures from datasets too complex for manual analysis, like most X‐ray fluorescence microscopy data. Possible future extensions are also discussed.     

Stochastic integration,trace and the skeleton of wiener functionals

It is shown that the notion of trace induced by a given complete orthonormal system relates the Skorohod integral with a corresponding Ogawa‐type integral evaluated with respect to the same orthonormal systems. Similarly the multiple Wiener‐Ito integral is shown to be related to a multiple Ogawa‐type integral induced by a complete orthonormal system via the Hu‐Meyer formula with suitably defined multiple traces. The notion of skeleton of a Wiener functional relative to a given orthonormal system is defined and yields what seems to be a “natural” extension of Wiener functionals to the Cameron Martin space and the Wiener processes with a different scale.     

Recent Developments in Flow Injection/Sequential Injection Liquid-Liquid Extraction for Atomic Spectrometric Determination of Metals and Metalloids

Abstract

This review aims to provide a critical overview of automated flow injection and sequential injection liquid-liquid extraction for preconcentration and/or separation of ultra-trace metal and metalloid species hyphenated with atomic spectrometric detection systems, including some new trends and applications in the subbranches of cloud point extraction (CPE), wetting film extraction (WFE), supported liquid membrane extraction (SLME), extraction chromatography (EChr), and liquid-phase microextraction (LPME) techniques. The analytical performance of flow-injection/sequential injection liquid-liquid extraction methods is markedly affected by the components of the flow network such as segmentor, extraction coil, and phase separator. Thus, an overall presentation of system components along with some novel strategies for interface with atomic spectrometers is discussed and exemplified with selected applications.     

Stable local trace formula

Langlands program is the central concern of modern number theory. In general, we think that the main tool for studying this program is the trace formula. Arthur-Selberg’s trace formula is successful in solving the endoscopic case of Langlands program. Arthur stabilized the geometric side of the local trace formula in the general case, but did not stabilize the general spectral. This paper aims to solve the general case by different method in the Archimedean case, by directly stabilizing the spectral side of the local trace formula, and obtains the stable local trace formula.     

The Role of Column Switching in Analysing Complex Samplest

Abstract

Our objective in using column switching is primarily to achieve the desired separation in the minimum analysis time. Complimentary to this aim is the need for sample and column cleanup followed by column re-equilibration. Finally, all operations should be capable of automation. Fundamental to column switching methodology is the concept of Zone cutting, where part of the chromatogram is transferred to another column. This forms the basis of sample cleanup and is a very versatile and powerful method. Multiple zone cutting is also possible to further increase the scope of cleanup or to minimise analysis time. Zone cutting is also complimentary to the techniques of trace enrichment and recycling. Examples will be given involving the use of these techniques in the analysis of complex matrices such as urine, plant extracts, wine and serum. The latter will be used to propose a novel approach to the quantitative analysis of anti-convulsants in serum using hexobarbital as internal standard.     

An improved Sampling Strategy for the Measurement of VOCs in Air,Based on Cooled Sampling and Analysis by Thermodesorption-GC-MS/FID

Abstract

Reliable and comprehensive sampling methods are required to obtain accurate data for VOC concentrations in air samples. The major drawback of the adsorption tube sampling method, widely employed in environmental studies, is the fact that C₂ compounds are usually not trapped quantitatively.

The focus of this work was thus to improve sampling based on adsorption tubes packed with Molsieve and Carbosieve. To improve the sampling efficiency for the C₂ compounds, a cooling device, based on Peltier cooling was constructed, which could be operated at a temperature down to ?30°C.

Experiments under laboratory and field conditions were carried out to study the influence of the sampling temperatuie on the recovery of ethane and ethene as the most volatile VOCs. The results clearly demonstrate the need for a cooled sampling device for the analysis of C₂ compounds in air. Under the investigated conditions, the recoveries with ambient temperature sampling were only in the range of 38–46% for ethane and 33–59% for ethene respectively, in comparison to the cooled sampling device. These findings are only valid for the described conditions and can change significantly with temperature and concentration. A generalisation of the recovery is thus very difficult to give.

The use of the sampling device for a field study is reported, where samples were collected simultaneously at three different altitudes in a diurnal profile on the slope of the Schulterberg mountain in Tyrol (Austria).