Sodium alginate/magnesium oxide nanocomposite scaffolds for bone tissue engineering

A simple 2‐step method, consisting of film casting and polyvinyl alcohol leaching, is proposed to prepare magnesium oxide (MO) nanoparticle‐reinforced sodium alginate scaffolds with right properties for bone tissue engineering. The cytocompatibility of the as‐prepared scaffolds was also evaluated using the 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium‐bromide yellow tetrazole assay test, wherein chondrocyte cells had been considered as target cells. According to the results, the ensuing sodium alginate nanocomposites, containing 4‐wt% MO nanoparticles, demonstrated the highest physical and mechanical properties after leaching step. The Young modulus of sodium alginate/4‐wt% MO was improved about 44%, in comparison with that of the pure alginate sample. Furthermore, incorporating MO nanoparticles up to 4 wt% controlled the liquid uptake capacity of scaffolds vis‐à‐vis the resultant pure sodium alginate sample. Moreover, with increasing the nanoparticle content, the antibacterial properties of scaffolds enhanced, but their degradation rates under in vitro conditions tapered off. With the introduction of 3‐ and 4‐wt% MO, the average diameter of the bacterial zone of the scaffold samples reduced to less than 10 mm², suggesting an insensitive antimicrobial performance, compared with the pure sodium alginate and the samples with 1‐ and 2‐wt% MO content, which exhibit antimicrobial sensitivity. 3‐(4,5‐Dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium‐bromide assay test also revealed the cultivated chondrocyte cells on the 4‐wt% MO nanoparticle‐reinforced scaffold possessed better interaction as well as appropriate cell attachment and proliferation than the pristine sodium alginate sample.     

Synergistic Effects of Beta Tri‐Calcium Phosphate and Porcine‐Derived Decellularized Bone Extracellular Matrix in 3D‐Printed Polycaprolactone Scaffold on Bone Regeneration

Bone‐derived extracellular matrix (ECM) is widely used in studies on bone regeneration because of its ability to provide a microenvironment of native bone tissue. However, a hydrogel, which is a main type of ECM application, is limited to use for bone graft substitutes due to relative lack of mechanical properties. The present study aims to fabricate a scaffold for guiding effective bone regeneration. A polycaprolactone (PCL)/beta‐tricalcium phosphate (β‐TCP)/bone decellularized extracellular matrix (dECM) scaffold capable of providing physical and physiological environment are fabricated using 3D printing technology and decoration method. PCL/β‐TCP/bone dECM scaffolds exhibit excellent cell seeding efficiency, proliferation, and early and late osteogenic differentiation capacity in vitro. In addition, outstanding results of bone regeneration are observed in PCL/β‐TCP/bone dECM scaffold group in the rabbit calvarial defect model in vivo. These results indicate that PCL/β‐TCP/bone dECM scaffolds have an outstanding potential as bone graft substitutes for effective bone regeneration.     

Injectable Hydrogels for Cardiac Tissue Engineering

In light of the limited efficacy of current treatments for cardiac regeneration, tissue engineering approaches have been explored for their potential to provide mechanical support to injured cardiac tissues, deliver cardio‐protective molecules, and improve cell‐based therapeutic techniques. Injectable hydrogels are a particularly appealing system as they hold promise as a minimally invasive therapeutic approach. Moreover, injectable acellular alginate‐based hydrogels have been tested clinically in patients with myocardial infarction (MI) and show preservation of the left ventricular (LV) indices and left ventricular ejection fraction (LVEF). This review provides an overview of recent developments that have occurred in the design and engineering of various injectable hydrogel systems for cardiac tissue engineering efforts, including a comparison of natural versus synthetic systems with emphasis on the ideal characteristics for biomimetic cardiac materials.     

Removal and regeneration of aqueous divalent cations by boehmite

Boehmite (Al(OH)O) was employed for the removal of aqueous Mg(2+), Cu(2+), Cd(2+), Pb(2+), and Co(2+) at 298 K. Although boehmite was able to remove these divalent cations, the greater removal rate with boehmite of Pb(2+) (28.7%) than with Mg(2+), Cu(2+), Cd(2+), and Co(2+) (5.6, 25.3, 10.9, and 13.3%, respectively) was observed under acidic conditions. Under stronger alkaline conditions, in which the lead species was completely dissolved, a greater removal rate of Pb(2+) (more than 80%) was observed under the corresponding conditions employed for the acidic conditions. The removed lead species could not be dissolved from boehmite in an acidic solution while an evident dissolution of lead species was detected using an aqueous NaOH solution. The results shown in the present study reveal that boehmite can be employed as a reagent for the removal and regeneration of aqueous metal cations.     

Copper recovery by polymer enhanced ultrafiltration (PEUF) and electrochemical regeneration

In this work, the removal of Cu²⁺ from a synthetic effluent has been tested by means of polymer enhanced ultrafiltration (PEUF), using partially ethoxylated polyethylenimine (PEPEI) as water-soluble polymer. Overall, the two necessary steps of a hypothetical continuous process, metal retention (in total recirculation and discontinuous mode) and polymer regeneration (in discontinuous mode), have been confronted individually. On the one hand, the values of temperature (T), transmembrane pressure (ΔP), metal–polymer ratio and pH that maximize both, permeate fluxes and rejection coefficients, have been obtained by ultrafiltration tests, reaching Cu²⁺ retention coefficients higher than 97%. On the other hand, the polymer regeneration step has been carried out by the electrochemical technique, which consists in the metal electrodeposition on the cathode of an electrochemical cell. In a first step, cyclic voltammetries have been carried out to assure the polymer does not suffer any oxidation or reduction process. From these tests, a cathodic working potential has been selected to minimize hydrogen evolution reaction (−0.7 V vs. Ag/AgCl). Working at this voltage in deposition tests, a pH of 3.3 has been selected from experiments at different pH values. This pH is less extreme than the pH necessary if this step was carried out chemically (pH 2).     

Bioactive Phenylboronic Acid-Functionalized Hyaluronic Acid Hydrogels Induce Chondro-Aggregates and Promote Chondrocyte Phenotype

Hydrogels are extensively investigated as biomimetic extracellular matrix (ECM) scaffolds in tissue engineering. The physiological properties of ECM affect cellular behaviors, which is an inspiration for cell-based therapies. Photocurable hyaluronic acid (HA) hydrogel (AHAMA-PBA) modified with 3-aminophenylboronic acid, sodium periodate, and methacrylic anhydride simultaneously is constructed in this study. Chondrocytes are then cultured on the surface of the hydrogels to evaluate the effect of the physicochemical properties of the hydrogels on modulating cellular behaviors. Cell viability assays demonstrate that the hydrogel is non-toxic to chondrocytes. The existence of phenylboronic acid (PBA) moieties enhances the interaction of chondrocytes and hydrogel, promoting cell adhesion and aggregation through filopodia. RT-PCR indicates that the gene expression levels of type II collagen, Aggrecan, and Sox9 are significantly up-regulated in chondrocytes cultured on hydrogels. Moreover, the mechanical properties of the hydrogels have a significant effect on the cell phenotype, with soft gels (≈2 kPa) promoting chondrocytes to exhibit a hyaline phenotype. Overall, PBA-functionalized HA hydrogel with low stiffness exhibits the best effect on promoting the chondrocyte phenotype, which is a promising biomaterial for cartilage regeneration.     

An Injectable Integration of Autologous Bioactive Concentrated Growth Factor and Gelatin Methacrylate Hydrogel with Efficient Growth Factor Release and 3D Spatial Structure for Accelerated Wound Healing

Growth factors are essential for wound healing owing to their multiple reparative effects. Concentrated growth factor (CGF) is a third-generation platelet extract containing various endogenous growth factors. Herein, a CGF extract solution is combined with gelatin methacrylate (GM) by physical blending to produce GM@CGF hydrogels for wound repair. The GM@CGF hydrogels show no immune rejection during autologous transplantation. Compared to CGF, GM@CGF hydrogels not only exhibit excellent plasticity and adhesivity but also prevent rapid release and degradation of growth factors. The GM@CGF hydrogels display good injectability, self-healing, swelling, and degradability along with outstanding cytocompatibility, angiogenic functions, chemotactic functions, and cell migration-promoting capabilities in vitro. The GM@CGF hydrogel can release various effective molecules to rapidly initiate wound repair, stimulate the expressions of type I collagen, transform growth factor β1, epidermal growth factor, and vascular endothelial growth factor, promote the production of granulation tissues, vascular regeneration and reconstruction, collagen deposition, and epidermal cell migration, as well as prevent excessive scar formation. In conclusion, the injectable GM@CGF hydrogel can release various growth factors and provide a 3D spatial structure to accelerate wound repair, thereby providing a foundation for the clinical application and translation of CGF.     

Protein‐Affinitive Polydopamine Nanoparticles as an Efficient Surface Modification Strategy for Versatile Porous Scaffolds Enhancing Tissue Regeneration

Porous scaffolds for tissue regeneration are often functionalized with extracellular matrix proteins to enhance surface/cell interactions and tissue regeneration. However, continuous coatings produced by commonly used surface modification strategies may preclude cells from contacting and sensing the chemical and physical cues of the scaffold. Here, it is shown that polydopamine nanoparticles (PDA‐NPs) tightly adhere on various scaffolds to form nanostructures, and the coverage can be finely tuned. Furthermore, the PDA‐NPs have good affinity to a variety of proteins and peptides. Thus, the PDA‐NPs act as an anchor to immobilize signal biomolecules on scaffolds, and consequently promote cell activity and tissue regeneration. β‐Tricalcium phosphate (TCP) scaffolds decorated with PDA‐NPs demonstrate excellent osteoinductivity and bone‐regeneration performance due to the protein affinity of PDA‐NPs and the intrinsic bioactive characteristics of TCP scaffolds. In summary, PDA‐NPs with excellent affinity for protein adhesion represent a versatile platform to modify porous scaffolds while not compromising the biological functions of the scaffolds, and might have potential applications in tissue regeneration.     

METHANE REFORMING WITH CARBON DIOXIDE TO PRODUCE SYNGAS?a?aCATALYST REGENERATION

The regeneration conditions of the deactivated catalyst 18wt%NiO/a-A12O3 used in methane reforming with carbon dioxide were studied by using a fix-bed flow reactor and TPR technique. When the deactivated catalyst was reduced at 1 123 K in a conventional regeneration process, the activity increased a little, but was still much lower than that of the fresh catalyst. When the deactivated catalyst was reduced, then treated in site With an activity-rejuvenating agent of 5-10 vo1% C (aqueous hydrogen peroxide solution) and reduced again at 1123K, the activity was renewed to approach that of the fresh one.