Co-immobilized Phosphorylated Cofactors and Enzymes as Self-Sufficient Heterogeneous Biocatalysts for Chemical Processes

Enzyme cofactors play a major role in biocatalysis, as many enzymes require them to catalyze highly valuable reactions in organic synthesis. However, the cofactor recycling is often a hurdle to implement enzymes at the industrial level. The fabrication of heterogeneous biocatalysts co-immobilizing phosphorylated cofactors (PLP, FAD⁺, and NAD⁺) and enzymes onto the same solid material is reported to perform chemical reactions without exogeneous addition of cofactors in aqueous media. In these self-sufficient heterogeneous biocatalysts, the immobilized enzymes are catalytically active and the immobilized cofactors catalytically available and retained into the solid phase for several reaction cycles. Finally, we have applied a NAD⁺-dependent heterogeneous biocatalyst to continuous flow asymmetric reduction of prochiral ketones, thus demonstrating the robustness of this approach for large scale biotransformations.     

含尘焦油在改性白云石催化剂上的裂解特性

采用混捏法制备了一种添加助剂La的Ni-白云石催化剂。在常压固定床反应器中,以正十二烷、环己烷、甲苯和甲基萘的混合物作为焦油模型化合物,进行焦油裂解特性研究。 考察了温度、空速、水料比等条件对气相产物产率的影响,对该催化剂进行了稳定性和再生性评价,在此基础上探讨了粉尘在催化剂表面沉积对催化剂性能影响的作用及机理。结果表明,该催化剂的最佳操作条件为反应温度800℃、空速300h^-1、水料比5:1、再生温度700℃、再生时间1h。XRD表征结果表明,改性白云石催化剂中形成了MgO-NiO固溶体和La(NiO₃)晶相。粉尘中的不同组分对催化剂性能的影响不同,CaO有利于提高催化剂的活性,Fe₂O₃的沉积会形成NiFe₂O₄的新晶相,而SiO₂会促进表面积炭,对催化活性的"抑制"作用明显。     

Microanalysis of hybrid characterization of PLA/cHA polymer scaffolds for bone regeneration

Tissue engineering uses some engineering strategies for the reconstruction and repair of the compromised tissues, among which the use of biomaterials as an alternative to conventional transplants is significant. However, not many research has been developed on the use of biopolymer nanostructure microanalysis and calcium phosphate composites of carbon apatite in PLA as scaffolds for tissue regeneration. In this work, poly (lactic acid) filaments with 5% and 20%, carbon apatite (cHA) were microanalysis to produce a 3D printing scaffold. The scaffolds were characterised by the Scanning Electron Microscope (SEM) and Energy Dispersive X-Ray (EDX) techniques, thereby making it possible to notice a good load dispersion. The microstructural analysis of the scaffolds was carried out by computerised micro-tomography to determine the roughness, morphological parameters of pore size distribution, porosity, as well as better visualisation of the distribution of particles. A computational in vitro and microanalysis tests to assess the biocompatibility viability of the PLA/cHA structure with a variation of scaffold geometry to evaluate their effects on morphological, physicochemical and mechanical properties were also carried out. The characterisation of Ca and P release assays were observed for longer incubation times and the dynamic condition control to simulate the stresses suffered by the biomaterial exerted by the flow of fluids was achieved. The results obtained indicated that the micrographs of the cross-sections of the scaffolds showed a flatness in the loaded material when compared to the 100/0 PLA. Furthermore, the apparent porosity of 5% and 20% of cHA scaffolds gave a porosity percentage of approximately 62% and 41% respectively. The reduced summit height, reduced valley depth and the percentage upper and lower bearing area difference of the samples are 16.33 nm, 9.62 nm and 75.07% respectively. The morphological characterisation surface roughness analysis and tolerance insertion gave a favourable reduced porosity result for the composite scaffolds with 5% of cHA. Hence, this work will assist biomaterial industries in the development of biomaterials which have been engineered with biological systems to meet medical purposes.     

ZrO2负载碳纳米管吸附去除水中氟的研究

以ZrO2负载多壁碳纳米管(ZrO2-MWCT)为吸附剂,系统研究了其对水中F-的吸附、脱附性能。结果表明,F-在ZrO2-MWCT吸附剂上的吸附等温线可以用Freundlich方程模拟,吸附动力学符合拟二级动力学方程,吸附速率随着F-初始浓度的提高而减低。当pH为4~5时,F-在ZrO2-MWCT吸附剂上的吸附量最大。水中阴离子的存在降低ZrO2-MWCT对F-的吸附量,不同阴离子对F-影响的大小顺序为:CO32->SO42->Cl->NO3-。吸附饱和的ZrO2-MWCT可用0.1mol/L的NaOH脱附再生,经4次再生后,其吸附量仍为14.55mg/g。     

储氢合金抗气体杂质毒化的研究进展

本文综述了氢气中的不同杂质气体对储氢合金吸放氢性能的影响。主要评价了LaNi4.7Al0.3、LaNi5、Fe-Ti、ZrCr2-xFex、Ti(Fe,Mn)等合金及它们的氢化物被CO、CO2、H2S等气体毒化的情况,并通过分析目前提升储氢合金抗毒化能力的主要方法及其使用效果,总结了合金抗毒化研究进展,为今后的发展提出了一些新思路。     

咪唑类离子液体混合物吸收CO2性能研究

结合常规离子液体和功能型离子液体在吸收CO₂方面的优势,将两类咪唑类离子液体进行混合,对其吸收CO₂的效果和再生性能进行了实验研究。结果表明,两类咪唑类离子液体混合后流动性明显改善,与CO₂接触气液传质顺畅;常规离子液体[bmim][BF₄]和[bmim][Tf₂N]与胺功能型离子液体[NH₂e-mim][BF₄]混合物较单一的离子液体吸收CO₂的量大,[bmim][CH₃CO₂]与[NH₂e-mim][BF₄]混合后较单一的[bmim][CH₃CO₂]吸收量有明显的减低;随着常规咪唑类离子液体阳离子碳链增长,混合离子液体吸收CO₂的效果变强;与胺乙基功能型离子液体混合吸收CO₂时,阴离子为[Tf₂N]的常规咪唑类离子液体要比阴离子为[BF₄]的吸收效果好;离子液体混合物吸收CO₂后经再生循环利用10次,混合物质量基本不变,循环使用后吸收CO₂性能为初始吸收性能的75%~85%。     

10 Gb/s全光3R再生的研究

报道了对10Gb／s恶化数据信号的全光3R(再放大、再定时、再整形)再生的实验研究。针对利用基于半导体光放大器的注入锁模环形激光器进行时钟恢复时的码型效应问题,提出了利用梳状滤波器对信号进行预处理。利用这个技术极大的减小了由于码型效应造成的时钟信号的幅度和时间抖动,从恶化的数据信号中恢复出无码型效应的高质量光时钟脉冲。信号整形的关键是光判决门,性能良好的判决门可以进一步提高信号的消光比、减小抖动。研究了基于电吸收调制器的信号再整形。利用上述器件构成的3R再生器,实现了10Gb／s恶化信号的全光3R再生。     

吸附分离正构烃结焦失活的无粘结剂5A分子筛氧化再生研究

在固定床吸附器上模拟无粘结剂5A分子筛的失活过程,并对失活分子筛进行氧化再生研究。结果表明,焦炭会堵塞部分分子筛孔道,导致失活分子筛的比表面积和孔容减小、平均孔径增加。焦炭含量增加,分子筛的失活度增加,但增加的速率逐渐减小。氧化反应温度由582K升至787K,焦炭脱除率由64%增至100%。失活分子筛于787K下氧化处理后,其上焦炭被完全脱除,分子筛的吸附活性完全恢复。氧化再生后分子筛的比表面积和孔容增加,但难以恢复至新鲜分子筛的水平。在685K~884K,实验得到的无粘结剂5A分子筛上焦炭的氧化脱除宏观动力学方程为：ln(C₀/C) = 0.013exp(-28122.1/T) (p_O2)0.32t。     

基于光纤光参量放大的异步双波长全光再生技术研究

本文提出了一种新型的多波长全光再生方案,利用相位时钟光纤光参量放大,并采用相邻信道偏振正交的方法,实现对由异步信源产生的双波长信号全光再生.理论分析了参量放大中的增益饱和现象用于幅度噪声抑制,以及利用相位时钟及后续色散实现对信号定时的机理.在这个基础上,对两个独立信源产生的异步双波长10Gbit/s信号进行再生实验,实验表明该方案有效的抑制了基于多波长3R再生系统中信道间的四波混频与交叉相位调制等非线性干扰.系统在单波长和双波长情况下分别将两路信号信噪比改善了至少6.5dB与4.5dB.误码率测试结果说明,与背对背测试结果相比,无论是在单波长还是双波长条件下,两路波长的信号经过再生后都实现了约2dB的接收机功率代价的改善.