脱硫脱硝后V2O5/AC在含NH3气氛中的再生及硫资源化的耦合过程研究

V2O5/AC具有很好的烟气同时脱硫脱硝能力,脱硫过程包括其对烟气中SO2的吸附、吸附饱和后SO2从其上的脱附（再生）及脱附出SO2的资源化。考察了同时脱硫脱硝后的V2O5/AC在含NH3气氛中的再生和硫资源化的耦合过程。研究了NH3注入量、再生温度、再生时间和尾气循环流量对再生效率、硫回收率及二次脱硫脱硝活性的影响。结果表明,再生温度和再生时间主要影响SO2的脱附,因而影响再生效率和二次脱硫脱硝活性;NH3注入量不影响SO2的脱附,但明显影响硫回收率和二次脱硫脱硝活性;尾气循环模式是提高硫回收率的重要方法,但在研究的条件下循环流量对再生效率、硫回收率和二次脱硫脱硝活性的影响不大。     

Costas环在无线扩频定位系统中的应用技术研究

分析了扩频定位系统中载波恢复和数据解调数学模型，设计了环路中应用的Butterworth低通滤波器和产生正交两路信号的Hilbert变换滤波器，在Simulink中建立了Costas环仿真模型。结果表明：该Costas环能够准确地实现扩频定位系统的载波恢复和发送端数据解调输出，理论仿真和实际工程实验基本一致。     

鱼糜漂洗水中可溶蛋白的回收技术

对鱼糜漂洗水中可溶蛋白的综合回收技术情况进行了相关介绍, 主要包括絮凝沉淀法、等电点沉淀法、膜分离法、电阻加热法等, 这些技术的使用不仅实现了蛋白资源的再利用, 而且也减少了对环境的污染.     

Energy,Exergy, Exergoeconomic and Emergy-Based Exergoeconomic (Emergoeconomic) Analyses of a Biomass Combustion Waste Heat Recovery Organic Rankine Cycle

In recent decades, there has been an increasing trend toward the technical development of efficient energy system assessment tools owing to the growing energy demand and subsequent greenhouse gas emissions. Accordingly, in this paper, a comprehensive emergy-based exergoeconomic (emergoeconomic) method has been developed to study the biomass combustion waste heat recovery organic Rankine cycle (BCWHR-ORC), taking into account thermodynamics, economics, and sustainability aspects. To this end, the system was formulated in Engineering Equation Solver (EES) software, and then the exergy, exergoeconomic, and emergoeconomic analyses were conducted accordingly. The exergy analysis results revealed that the evaporator unit with 55.05 kilowatts and the turbine with 89.57% had the highest exergy destruction rate and exergy efficiency, respectively. Based on the exergoeconomic analysis, the cost per exergy unit (c), and the cost rate (C˙) of the output power of the system were calculated to be 24.13 USD/GJ and 14.19 USD/h, respectively. Next, by applying the emergoeconomic approach, the monetary emergy content of the system components and the flows were calculated to evaluate the system’s sustainability. Accordingly, the turbine was found to have the highest monetary emergy rate of capital investment, equal to 5.43×1012 sej/h, and an output power monetary emergy of 4.77×104 sej/J. Finally, a sensitivity analysis was performed to investigate the system’s overall performance characteristics from an exergoeconomic perspective, regarding the changes in the transformation coefficients (specific monetary emergy).     

非均匀采样干涉数据光谱反演技术研究

干涉光谱成像仪获取的干涉数据是一种中间数据,需要进行光谱反演才能够得到目标光谱数据,傅里叶变换方法是常规的光谱反演方法。由于干涉数据中存在非均匀采样问题,若忽略光谱混叠,直接采用快速傅里叶变换会导致反演光谱的失真,难以满足实时处理需求。针对非均匀采样干涉数据的光谱反演需求,将插值及非均匀快速傅里叶变换(NUFFT)方法应用到光谱反演处理中,对过采样及部分欠采样情况下的非均匀采样干涉数据,提出了相应的光谱反演方法,并分析了方法的适用性。最后对过采样及部分欠采样情况下的光谱反演方法进行计算机仿真,过采样情况下采用NUFFT方法反演光谱的精度要明显高于插值方法,而部分欠采样情况下插值方法反演光谱的精度要明显高于NUFFT方法,并对欠采样造成的光谱混叠有一定的修正,验证了方法的有效性。     

密度泛函理论研究碳链长度对氯化三烷基铵萃取氯化汞的影响

运用密度泛函理论方法研究了烷基碳链长度对氯化三烷基铵络合氯化汞的影响,计算结果表明,氯化三烷基铵与氯化汞的络合作用随着氯化三烷基铵中烷基碳链的增长而增强.通过对络合物的键长、Mayer键级和Mulliken电荷分析可知,电子富集在氯化三烷基铵的Cl原子上,并和Hg原子之间形成静电吸引作用.当烷基长度小于3时,烷基的电子效应影响较为明显,增强了原子之间的电子转移,使得络合物更稳定;当氯化三烷基铵烷基碳链长度大于3后,烷基链长对络合物中的电子转移不再有影响,络合物的稳定性受到烷基的几何效应影响更为明显.     

高炉冲渣水余热回收的可行性研究

根据高炉冲渣水的余热特点,提出了一个采用分离式热管换热器的余热回收的方案。文中对余热回收方案中换热设备的结构特点进行了描述。     

Surface tension-driven shape-recovery of micro/nanometer-scale surface features in a Pt57.5Ni5.3Cu14.7P22.5 metallic glass in the supercooled liquid region: A numerical modeling capability

Recent experiments in the literature show that micro/nano-scale features imprinted in a Pt-based metallic glass, Pt_57.5Ni_5.3Cu_14.7P_22.5, using thermoplastic forming at a temperature above its glass transition temperature, may be erased by subsequent annealing at a slightly higher temperature in the supercooled liquid region (Kumar and Schroers, 2008). The mechanism of shape-recovery is believed to be surface tension-driven viscous flow of the metallic glass. We have developed an elastic-viscoplastic constitutive theory for metallic glasses in the supercooled liquid temperature range at low strain rates, and we have used existing experimental data in the literature for Pt_57.5Ni_5.3Cu_14.7P_22.5 (Harmon et al., 2007) to estimate the material parameters appearing in our constitutive equations. We have implemented our constitutive model for the bulk response of the glass in a finite element program, and we have also developed a numerical scheme for calculating surface curvatures and incorporating surface tension effects in finite element simulations. By carrying out full three-dimensional finite-element simulations of the shape-recovery experiments of Kumar and Schroers (2008), and using the independently determined material parameters for the bulk glass, we estimate the surface tension of Pt_57.5Ni_5.3Cu_14.7P_22.5 at the temperature at which the shape-recovery experiments were conducted. Finally, with the material parameters for the underlying elastic-viscoplastic bulk response as well as a value for the surface tension of the Pt-based metallic glass fixed, we validate our simulation capability by comparing predictions from our numerical simulations of shape-recovery experiments of Berkovich nanoindents, against corresponding recent experimental results of Packard et al. (2009) who reported shape-recovery data of nanoindents on the same Pt-based metallic glass.     

Point‐to‐Plane Nonhomogeneous Electric‐Field‐Induced Simultaneous Formation of Giant Unilamellar Vesicles (GUVs) and Lipid Tubes

It is well‐known that homogeneous electric fields can be used to generate giant unilamellar vesicles (GUVs). Herein we report an interesting phenomenon of formation of GUVs and lipid tubes simultaneously using a nonhomogeneous electric field generated by point‐to‐plane electrodes. The underlying mechanism was analyzed using finite element analysis. The two forces play main roles, that is, the pulling force (F) to drag GUVs into lipid tubes induced by fluid flow, and the critical force (Fc) to prevent GUVs from deforming into lipid tubes induced by electric fields. In the center area underneath the needle electrode, the GUVs were found because F is less than Fc in that region, whereas in the edge area the lipid tubes were obtained because F is larger than Fc. The diffusion coefficient of lipid in the tubes was found to be 4.45 μm² s^?1 using a fluorescence recovery after photobleaching (FRAP) technique. The method demonstrated here is superior to conventional GUV or lipid tube fabrication methods, and has great potential in cell mimic or hollow material fabrication using GUVs and tubes as templates.     

Synthesis,Characterization, and Property Evaluation of a Hydrophobically Modified Polyacrylamide as Enhanced Oil Recovery Chemical

A novel hydrophobically modified polyacrylamide p(AM/NaA/OP-10-AC/BOAM) was successfully synthesized via an aqueous micellar copolymerization method from acrylamide (AM), sodium acrylate (NaA), octylphenol polyoxyethylene acrylate (OP-10-AC), and small amounts of N-benzyl-N-octylacrylamide (BOAM), with the aim of investigating the copolymer's rheological behaviors under various conditions such as polymer concentration, shearing, temperature, and salinity. The copolymer was characterized by infrared spectroscopy, scanning electron microscopy, and atomic force microscope. Scanning electron micrographs show large aggregates in solution formed by the association from the hydrophobic groups of the copolymer. Compared with partially hydrolyzed polyacryamide (HPAM), the copolymer shows a much higher thickening capability and a much greater ability to resist shearing, heat, and salts. This good property of the copolymer is attributed to its three-dimensional dimensional network structure. According to the core flooding test, it can be obtained that oil recovery is enhanced about 4.3% by the copolymer flooding contrasted to the HPAM flooding in mid-low permeability cores under conditions of 1500 mg/L of polymers and 45°C. All the results prove that the copolymer has the capability of increasing oil recovery by improving waterflood sweep efficiency in high-salinity reservoirs.