Effects of operating parameters on oxidative coupling of methane over Na-W-Mn/SiO2 catalyst at elevated pressures

The effects of operating parameters on oxidative coupling of methane (OCM) over Na-W-Mn/SiO2 catalyst have been studied at elevated pressures of 0.2, 0.3 and 0.4 MPa under low gaseous hourly space velocity (GHSV) and low temperature conditions. Experimental results show that when the operating pressure is increased, C2+ yield slightly decreases, while the maximum ratio of ethylene to ethane remains unchanged. Moreover, it has been found empirically that increase of pressure does not affect the catalyst behavior permanently, the catalyst recovers its original low pressure performance without hysteresis behavior by reducing the pressure. Under the investigated conditions, when oxygen is completely consumed, the increase of GHSV leads to improvement in C2 selectivity, while C3+ and COx selectivities decrease slightly. The C2+ selectivity increases by increase of nitrogen diluent in the feed, but the C3+ hydrocarbons selectivities decrease with increase of nitrogen since it is possible that further dilution at high pressure may reduce the probability of collision between CH3 and C2+ hydrocarbons. During the stability test at high pressure, the catalyst performance remains unchanged throughout the 20 h running. The fresh and used catalysts were characterized using XRD, SEM and N2 adsorption-desorption methods. It was found that the phase transformation of the support from α-cristobalite to tridymite and quartz does not have obvious effect on catalyst performance at high pressure.     

仿生超疏油材料在苛刻工况条件下的应用

超双疏兼备超疏水和超疏油两种极端不润湿现象,其中超疏油的实现难度更大,应用前景广阔。为了获得超疏油材料,通常采用仿生思路,在材料表面构建粗糙结构和以含氟低表面能物质修饰表面。表面粗糙结构在机械力学作用下易遭到破坏,例如摩擦和冲击。低表面能物质修饰层在光照条件下易分解,而诸多的太阳能装置如太阳能电池板,必须在室外工作。耐紫外的超疏油性可以帮助这些设施实现高效工作并延长使用期限,节约资源。更进一步,科研人员研究了超疏油材料在各种苛刻条件下的可靠性。本文应用新进展聚焦在超疏油材料在紫外线照射下的可靠性或可逆响应性;超疏油材料经过撞击之后的油滴接触角变化;在高温条件下超疏油材料的极端润湿性能保持能力;在冲击条件下的稳定性,甚至包括了多种复合苛刻条件下的超疏油材料的耐受性。由于大多的工业环境无法避开摩擦和腐蚀,因此本文着重从超疏油材料的耐摩擦性和抗腐蚀性两个方面讨论了其研究现状,同时也讨论了超疏油在其他工程应用方面的可靠性。最后,总结了各实验方案的优缺点、实验与工业化过程中存在的问题、有望突破的方向,以及作者对于在苛刻工况条件下提升超疏油材料可靠性的观点。     

双源CT双能量参数联合血清miR-126、miR-204检测对肺癌诊断价值及与临床病理特征关联性

回顾性选取肺癌患者86例为肺癌组,同期肺良性结节患者86例为对照组,患者均行双源CT双能量、血清miR-126、miR-204水平检测,发现静脉期标准化碘浓度(NIC)、动脉期NIC、miR-204、miR-126水平在肺癌组中呈异常表达,并与肺癌组病理类型、临床分期、淋巴结转移存在一定相关性,三者联合对肺癌具有一定诊...     

Atomic layer deposition: An efficient tool for corrosion protection

Atomic layer deposition (ALD) is now a widely implemented thin film growing method. It is currently used in industrial fabrication processes of microelectronics and luminescent display technologies. Since compact and conformal films can be grown with perfect control of the thickness, ALD is envisioned in numerous other applications fields such as energy, sensing, biomaterials, and photonics. Although few reports can be found on its application to corrosion protection, it has been shown that the qualities of ALD can be highly beneficial to this field. After a brief review of the principle of ALD and the effect of the main parameters on the properties of the films, this report attempts to show the interest of this technique to mitigate corrosion. Various examples of successful uses of ALD to protect metallic and non-metallic surfaces in different fields are reviewed.