HSH-carbon: A novel sp2−sp3 carbon allotrope with an ultrawide energy gap

An sp²-sp³ hybrid carbon allotrope named HSH-carbon is proposed by the first-principles calculations. The structure of HSH-carbon can be regarded as a template polymerization of [1.1.1]propellane molecules in a hexagonal lattice, as well as, an AA stacking of recently reported HSH-C₁₀ consisting of carbon trigonal bipyramids. Based on calculations, the stability of this structure is demonstrated in terms of the cohesive energy, phonon dispersion, Born−Huang stability criteria, and ab initio molecular dynamics. HSH-carbon is predicted to be a semiconductor with an indirect energy gap of 3.56 eV at the PBE level or 4.80 eV at the HSE06 level. It is larger than the gap of Si and close to the gap of c-diamond, which indicates HSH-carbon is potentially an ultrawide bandgap semiconductor. The effective masses of carriers in the VB and CB edge are comparable with wide bandgap semiconductors such as GaN and ZnO. The elastic behavior of HSH-carbon such as bulk modulus, Young’s modulus and shear modulus is comparable with that of T-carbon and much smaller than that of c-diamond, which suggests that HSH-carbon would be much easier to be processed than c-diamond in practice.     

L波段高功率线极化径向线阵列天线理论分析与数值模拟

 探索了L波段的高功率线极化径向线阵列天线。基于三角形栅格形式实现了径向线圆形平面阵列天线,分析并给出了径向线并联馈电网络,并以同轴馈电的水平单圆环线极化天线为基础,利用径向线并联馈电网络设计出了间距小于一个波长下L波段高功率线极化径向线阵列天线。研究结果表明：这种结构实现径向线阵列天线的线极化辐射是可行的,该天线在中心频率1.57 GHz下,增益为19.97 dBi,轴比为-52.06 dB,反射系数为0.105 2;在1.37～1.77 GHz的频率范围内增益大于18.64 dBi,轴向轴比值小于-46.45 dB。     

扫描环形光斑激光束优化研究

激光束的形状和能量分布限定了激光的应用范围,为满足不同的激光加工需要,必须对激光束进行变换。针对实验室用CO2激光器在热处理方面的应用,提出了激光扫描环形光斑光束优化法。基于温度场叠加原理建立了扫描环形光斑温度场的数学模型,模拟其温度场,可得到其温度分布特性;通过实验研究,分析了聚焦光斑与扫描环形光斑在激光淬火中对材料的热作用效果。结果表明,扫描环形光斑能改善激光热处理硬化层分布。理论和实验研究表明,激光扫描环形光斑技术可以实现激光热处理光束的优化,有一定的应用前景。     

Comparison of the growth and degradation of poly(glycolic acid) and poly(ε‐caprolactone) brushes

The growth and degradation of poly(glycolic acid) (PGA) and poly(ε‐caprolactone) (PCL) brushes were compared. Using tin (octanoate) as the catalyst, optimal conditions were found for growth of each polyester brush from the hydroxy‐terminated silicon surface via ring‐opening polymerization. PCL brushes grew thicker at elevated temperatures but the thickest PGA brushes grew at room temperature. Unlike bulk polyesters that can degrade under both acidic and basic conditions, the confined surface polyester brushes only degraded under neutral or basic conditions. The degradation mechanism of grafted polyester brushes was probed through a blocking test. It was shown that the terminal hydroxy groups of these polyester brushes were essential to the degradation process indicating a preferential backbiting mechanism. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4643–4649     

Transformation of macromonomers into ring‐opening polymerization macroinitiators: A detailed initiation efficiency study

In the present study, n‐butyl acrylate macromonomer (BAMM) (M_n = 1900 g mol^?1; PDI = 1.96) has been synthesized via a high‐temperature polymerization process. Subsequently, the olefinic termini of the BAMM have been transformed into a diol via a dihydroxylation process using KMnO₄ as an oxidizing agent. The OH‐terminated macroinitiator pBA(OH)₂ has subsequently been employed for the ring‐opening polymerization (ROP) of ε‐caprolactone via various catalytic systems, that is, organo‐(1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene), metal (tin(II) 2‐ethylhexanoate), and enzymatic catalysis (Novozym® 435). The obtained pBA‐b‐pCL block copolymers and the initiation efficiency of the BAMM macroinitiator have been investigated via size exclusion chromatography (SEC), electrospray ionization–mass spectrometry (ESI‐MS) hyphenated with SEC and liquid chromatography at the critical conditions of both poly(ε‐caprolactone) (pCL) and pBA. The in vitro enzyme catalysis (eROP) approach proved to be the most efficient catalysis system due to minor transesterification side reactions during the polymerization process. However, side reactions such as transesterifications occur in each catalytic system and—while they cannot be suppressed—they can be minimized. The species generated during the eROP process include the desired block copolymer pBA‐b‐pCL as main species as well as pCL homopolymer and residual macroinitiator pBA(OH)₂. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

N-(Diphenoxyphosphoryl)Succinimide: Synthesis and Reaction with Alkoxides

Abstract

Reaction of succinimide with diphenylchlorophosphate in the presence of lithium bis(trimethylsilyl)amide followed by aqueous work-up led to the formation of amidophosphate 3. The same reaction performed in the presence of sodium hydride yield N-(diphenylphosphoryl)succinimde 4, which undergoes nucleophilic ring opening with sodium alkoxides resulted in the formation of phosphoroamidate analogues 5 a-d in good yields.

GRAPHICAL ABSTRACT      

A NEW SYSTEM EXHIBITING A HIGH BARRIER TO ROTATION ABOUT THE P—N BOND. SYNTHESES AND SPECTRAL STUDIES OF 1,3,2-DIAZAPHOSPHETIDIN-4-ONE DERIVATIVES

Abstract

1,3,2-Diazaphosphetidin-4-one derivatives were synthesized. Their ¹H NMR signals at ambient temperature displaed a broad doublet which eventually coalesced before becoming sharp upon warming, and the ¹³C NMR spectra also showed that the α-and β-carbons of the dialkylamino group were non-equivalent. The phenomena were ascribed to restricted rotation about the exocyclic P—N bond.     

Abundant Intramolecular Ring Rearrangements of 1-(N-Benzyloxycarbonylamino)arylmethylphosphonate Phenyl monoesters Under Electrospray Ionization Conditions

Abstract

The mass spectrometric behavior of 1-(N-benzyloxycarbonylamino)arylmethyl-phosphonate phenyl monoesters was investigated under positive ion electrospray ionization conditions. All nitrogen-protonated title compounds undergo four- and/or six-membered ring rearrangements to yield nitrogen-containing fragment ions by consecutive or simultaneous loss of a carbon dioxide and phenyl hydrogen phosphonate or phenyl benzylphosphonate or an arylmethylimine. All oxygen-protonated title compounds undergo four- to six-membered ring rearrangements to produce fragment ions by loss of a carbon dioxide plus an arylmethylimine, or phenyl benzylphosphonate, by consecutive or simultaneous loss of benzyl phenyl ether and isocyanic acid. The fragmentation is obviously different from the corresponding methyl and ethyl monoesters, which show a tendency to undergo intramolecular four-membered ring rearrangements only.

GRAPHICAL ABSTRACT      

Solvent-Free Conversion of N,N-Dimethylhydrazones to Nitriles Under Microwave Irradiation

A variety of aldehyde N,N-dimethylhydrazones are rapidly converted into the corresponding nitriles using oxone supported on wet Al₂O₃ under microwave irradiation in dry media.     

Effect of Amines on the Selective Bromination of Some β-Substituted-2-Butenoic Esters

The effect of amines on the selective bromination of some β-substituted-2-butenoic esters is described. The bromination of methyl (Z)-4-t-butyldiphenylsilyloxy-3-methylbutenoate 2 in the presence of DIPEA (N, N-diisopropylethylamine) and the successive treatment of the obtained dibromide with potassium t-butoxide afford the desired Z bromide selectively. But the corresponding E bromide forms exclusively when 2, 6-di-t-butyl-4-methylpyridine is used in the bromination.