萜类化合物13C NMR化学位移的定量构谱相关研究

利用原子电性作用矢量(Atomic electro-negativity interaction vector,AEIV)和原子杂化状态指数(Atomic hybridization state index,AHSI)对萜类化合物中的C原子进行结构表征并与其核磁共振碳谱(13C NMR)建立了优良的定量构谱相关(QSSR)模型.其中29个单萜类化合物中的290个C原子建模的计算值经留一法(Leave-one-out,LOO)交互校验(Cross-validation,CV)预测值的复相关系数(R)分别为0.9900和0.9867,进一步使用倍半萜、二萜、三萜化合物分子中65个C原子的13C NMR化学位移值来检测该模型的稳定性,模型预测值和观测值间复相关系数(R)为0.9777,取得了令人满意的结果.     

有机磷酸酯类化合物气相色谱定量结构保留关系研究

采用分子电性距离矢量(MEDV)表征有机磷酸酯类化合物的分子结构,运用多元线性回归建立定量结构-色谱保留关系(QSRR)模型,同时采用逐步回归结合统计检测对模型进行变量筛选,建立了35个有机磷酸酯类化合物在3种不同固定相(OV-101,DB-1701和DB-WX)上气相色谱保留指数(RI)与MEDV的定量相关模型.在3种固定相上的QSRR模型的建模计算值复相关系数(R)、留一法(leave-one-out)交互校验复相关系数(QCV)分别为0.998 0和0.995 1(OV-101);0.996 3和0.989 6(DB-1701);0.993 7和0.984 1(DB-WX),表明模型具有良好估计能力与稳定性.     

产酸克氏杆菌1,3-丙二醇发酵液中2,3-丁二醇的定性和定量分析

产酸克氏杆菌(Klebsiella oxytoca)在厌氧和微好氧条件下均可以发酵甘油产生1,3-丙二醇。相对于厌氧发酵液,在微好氧发酵液的高效液相色谱图中出现两个未知物峰。对微好氧发酵液进行离心,脱盐和蒸馏处理,以两未知物质为主要成分的馏分通过气相色谱-质谱联机分析显示两种未知物质均为2,3-丁二醇,通过气相色谱和高效液相色谱分析确定两未知物质分别为meso-2,3-丁二醇和L-( )-2,3-丁二醇。建立了用HPLC法对meso-2,3-丁二醇和L-( )-2,3-丁二醇进行外标定量的测定方法,在标准品浓度100~1200mg/L范围内,meso-2,3-丁二醇线性方程为y=7×10-6x,r=0.9991;L-( )-2,3-丁二醇线性方程为y=7×10-6x,r=0.9998。在发酵液样品中meso-2,3-丁二醇的回收率为99.67%;相对标准偏差RSD为0.35%,L-( )-2,3-丁二醇的回收率为99.89%;相对标准偏差RSD为0.09%。     

Comparison of quantitative methods for analysis of polyphasic pharmaceuticals

Adequate very sensitive quantification methods are needed for the development and are also now required for the monitoring of undesirable solid form(s) as routine tests. The pre-requisite for quantitation are selectivity, sensitivity and most important the purity of standards and their proper storage, what is a challenge for metastable forms. Several analytical techniques are available such as X-ray diffraction, spectroscopy, thermal analysis and microcalorimetry. The different steps of the validation of the analytical methods and problems to be solved are discussed. Examples illustrate the different techniques and compare their possible advantages and limits. The relative standard deviation of measurements should allow for checking the homogenization procedure of mixtures for calibration. The validation should be carried out following ICH guidelines for validation of analytical methods. Comparison of different techniques in adequate concentration range add confidence in the analytical results.     

A new two-dimensional approach to quantitative prediction for collision cross-section of more than 110 singly protonated peptides by a novel moecular electronegativity-interaction vector through quantitative structure-spectrometry relationship studies

Based on two-dimensional topological characters, a novel method called molecular electronegativity-interaction vector (MEIV) is proposed to parameterize molecular structures. Applying MEIV into quantitative structure-spectrometry relationship studies on ion mobility spectrometry collision cross-sections of 113 singly protonated peptides, three models were strictly obtained, with correlative coefficient r and leave-one-out cross-validation q of 0.983, 0.979, 0.981, 0.979 and 0.980, 0.978, respectively. Thus, the MEIV is confirmed to be potent to structural characterizations and property predictions for organic and biologic molecules. Translated from Chinese Journal of Analytical Chemistry, 2006, 34(6) (in Chinese)     

NANOMECHANICAL MAPPING OF CARBON BLACK REINFORCED NATURAL RUBBER BY ATOMIC FORCE MICROSCOPY

Atomic force microscopy （AFM） has the advantage of obtaining mechanical properties as well as topographic information at the same time. By analyzing force-distance curves measured over two-dimensional area using Hertzian contact mechanics, Young＇s modulus mapping was obtained with nanometer-scale resolution. Furthermore, the sample deformation by the force exerted was also estimated from the force-distance curve analyses. We could thus reconstruct a real topographic image by incorporating apparent topographic image with deformation image. We applied this method to carbon black reinforced natural rubber to obtain Young＇s modulus distribution image together with reconstructed real topographic image. Then we were able to recognize three regions; rubber matrix, carbon black （or bound rubber） and intermediate regions. Though the existence of these regions had been investigated by pulsed nuclear magnetic resonance, this paper would be the first to report on the quantitative evaluation of the interfacial region in real space.     

石墨炉原子吸收法测定土壤中镉的测量不确定度评定

石墨炉原子吸收法测定土壤中镉的不确定度主要来源于称量样品、定容样品消解液、测定样品消解液中镉的质量浓度及测定土壤水分引入的不确定度。对各不确定度分量进行了计算,求得合成标准不确定度和扩展不确定度分别为0.0026、0.005mg/kg。镉测量不确定度的主要来源是测定样品消解液中镉质量浓度引入的不确定度。     

中国的百岁老人研究Ⅲ.百岁老人聚居区——中国长寿之乡的成因和评定

探讨了中国长寿之乡的成因,提出了评定中国长寿之乡的四项指标和六项衡量标准。主张中国长寿之乡应由有资质的学术团体经过认真调查和核实后认定,被命名的长寿之乡应是相当于县(市)或大城市区一级以上的地域,总人口应在10万人以上;该地区每百万人口中应有70位以上百岁老人;并应有反映后备力量和发展速度的指标。