直链型与支链型疏水缔合水凝胶的机械性能与溶胀行为

以丙烯酰胺(AM)为亲水单体,脂肪醇聚氧乙烯醚丙烯酸酯(AEO-AC-n-m,n为疏水端烷基链碳的数目,m为亲水端PEG链的长度,n,m=13,5;10,5;13,10)为疏水单体,十二烷基硫酸钠(SDS)为表面活性剂,过硫酸钾(KPS)为引发剂,通过胶束聚合制备了3种聚丙烯酰胺-co-脂肪醇聚氧乙烯醚丙烯酸酯(AM-co-AEO-AC)疏水缔合水凝胶.以疏水烷基链为直链的疏水单体AEO-AC-13-5合成的直链型水凝胶的网络结构均匀且强度高,其形态在水中可维持180 d.而以疏水烷基链为支链的疏水单体AEO-AC-10-5与AEO-AC-13-10合成的支链型水凝胶的机械性能较弱,60 d内即溶解于水中.在相同条件下,直链型水凝胶断裂时的最大应力是支链型水凝胶的4~5倍.利用弹性橡胶理论中的新胡克方程计算了直链型和支链型水凝胶的有效交联密度ν0和有效交联点间的分子量Mc.     

不同酯基结构的棕榈油生物柴油的性能研究

以棕榈油为研究对象,分别与甲醇、乙醇、异丙醇和异丁醇进行酯交换反应制备了不同酯基结构的生物柴油。利用差示扫描量热仪和应力控制流变仪分析了不同酯基结构棕榈油生物柴油的结晶行为和低温流变性能,同时分析了酯基结构对生物柴油的氧化稳定性,40℃时的动力黏度、20℃时的密度等重要性质的影响。结果表明,随着醇的碳链长度的增加,棕榈油生物柴油的析蜡点和胶凝点均降低,特别是棕榈油异丁酯的析蜡点和胶凝点分别降低到了-2.57和-8.09℃,低温流动性得到了明显改善,且氧化诱导期略有延长,氧化稳定性有所改善。生物柴油的密度和黏度随着酯基结构的不同而有所变化,但其数值都符合中国生物柴油标准。     

The Effect of Talc on the Mechanical,Crystallization and Foaming Properties of Poly(Lactic Acid)

Poly(lactic acid) (PLA)/talc composites containing different contents of talc were prepared by melt blending. Multiple properties of the prepared composites were investigated including mechanical, rheological and crystallization as well as foaming properties. Tensile test results indicated that the mechanical properties of the composite with 3% wt. talc showed significant reinforcement and toughening effect. When the talc content reached 10%, Young's modulus of the composite was increased by 35% compared with pure PLA. The morphological results showed that the talc layers were partially delaminated and uniformly dispersed in the PLA matrix at low loading. Differential scanning calorimetry (DSC) and polarized optical microscopy (POM) results indicated that 3% wt. talc significantly increased the crystallinity of the PLA matrix. The thermogravimetric analysis (TGA) results demonstrated that the thermal stability of PLA/talc composites was enhanced as well. Moreover, talc at low loading could act as a plasticizer in the polymer flow, which was investigated by rheological tests. The batch foaming experiments revealed that 3% wt. talc loading had the most notable heterogeneous nucleation effect, with the cell size decreasing from 15.4 μm for neat PLA to 8.5 μm and the cell density increasing by 298%.     

Macroscopic inhomogeneous deformation behavior arising in single crystal Ni–Mn–Ga foils under tensile loading

This study investigated macroscopic inhomogeneous deformation occurring in single-crystal Ni–Mn–Ga foils under uniaxial tensile loading. Two types of single-crystal Ni–Mn–Ga foil samples were examined as-received and after thermo-mechanical training. Local strain and the strain field were measured under tensile loading using laser speckle and digital image correlation. The as-received sample showed a strongly inhomogeneous strain field with intermittence under progressive deformation, but the trained sample result showed strain field homogeneity throughout the specimen surface. The as-received sample is a mainly polycrystalline-like state composed of the domain structure. The sample contains many domain boundaries and large domain structures in the body. Its structure would cause large local strain band nucleation with intermittence. However, the trained one is an ideal single-crystalline state with a transformation preferential orientation of variants after almost all domain boundary and large domain structures vanish during thermo-mechanical training. As a result, macroscopic homogeneous deformation occurs on the trained sample surface during deformation.     

Oximato-bridged copper(II) compounds: syntheses,molecular structures,magnetic, thermal and spectroscopic properties

Reaction of the Schiff base, 1-(4-methylimidazol-5-yl) phenylhydrazonopropane-2-one oxime (LH), with copper(II) perchlorate hexahydrate and copper(II) nitrate trihydrate in a 1 : 1 M proportion in methanol affords [Cu₂L₂(H₂O)(ClO₄)](ClO₄) (1) and [Cu₂L₂(H₂O)₂](NO₃)₂] (2) in moderate yields. Both 1 and 2 have been characterized by elemental analysis, ESI-MS, FT-IR, UV–vis absorption spectroscopy, EPR, electric conductivity, and magnetic susceptibility measurements. The X-ray crystal structures of 1·CH₃COCH₃ and 2 have been determined. Both compounds are dinuclear copper(II) complexes, with each copper μ₂-bridged by two oxime ligands in a μ₂-η¹,η² fashion. Variable temperature magnetic studies on 1 and 2 show that both compounds are dominated by an antiferromagnetic coupling through the oxime bridges.     

Versatile coordination behaviors of a tetrapodal Schiff base ligand scaffold: formation of the dinuclear and trinuclear complexes and their antimicrobial activity

Four new complexes have been prepared and characterized from reaction of the tetrapodal Schiff base ligand 1,1,1,1-tetrakis[(3-methoxysalicylaldimino)methyl]methane (H₄L) with Cu(II), Ni(II) and Cd(II). X-ray diffraction experiments revealed that 1 ([Cu₂L·2H₂O]·H₂O) and 2 ([Cu₂L·2CH₃OH]·3H₂O) are dinuclear complexes, with the same tetragonal pyramidal coordination geometries around their Cu(II) ions. Complex 3 ([Ni₂L]·2H₂O) is dinuclear with two square planar Ni(II) ions coordinated to two pairs of the pendant branches of H₄L. Complex 4 ([Cd₃(HL)₂]·3H₂O) is a linear trinuclear species with three Cd(II) ions, which were intermolecularly coordinated to three pendant branches of two H₄L ligands via an uncommon intermolecular phenoxo oxygen face-sharing mode. The in vitro antimicrobial activities of H₄L and its complexes were evaluated against four micro-organisms (Colibacillus, Staphylococcus aureus, Pseudomonas aeruginosa, and Bacillus subtilis) using the tube-dilution method. The results revealed that 3 showed good inhibitory activity against the Gram-positive bacteria S. aureus and B. subtilis with MIC values of 62.5 and 31.0 μg mL, respectively.     

The rigid isomeric 5-(x-pyridyl)-1H-tetrazole ligands-directed various isopolymolybdate-based compounds: assembly,structures, and properties

Two new isopolymolybdate-based metal–organic complexes, [Cu₂(2-ptz)₂(Mo₄O₁₄)_0.5] (1) and [Cu₃(OH)₂(3-ptz)₄(γ-H₄Mo₈O₂₆)(H₂O)₄]·10H₂O (2) (2-ptzH = 5-(2-pyridyl)-1H-tetrazole, 3-ptzH = 5-(3-pyridyl)-1H-tetrazole), constructed from isomeric ligands with different N-donor sites were synthesized under hydrothermal conditions. In 1, each [Mo₄O₁₄]^4? cluster connected with six neighboring [Mo₄O₁₄]^4? clusters through six binuclear [Cu₂(2-ptz)₂]²⁺ subunits to yield a 2-D layer. In 2, bidentate inorganic [Mo₈O₂₆]^4? anions link the trinuclear [Cu₃(OH)₂(3-ptz)₄] clusters to construct a 1-D chain. Adjacent chains connect through Mo–N bonds between the [Mo₈O₂₆]^4? anions and pyridyl groups from the trinuclear clusters to form a 2-D layer. The effect of the N-donor sites of the rigid isomeric ligands on the structures of 1 and 2 was discussed. The electrochemical properties and photocatalytic activities of 1 and 2 have also been studied.     

基于序关系法的飞行员安全行为评价指标权重系数的确定

飞行员操作行为的表现直接影响民航飞行安全.通过对飞行员不安全行为事故致因数据分析,运用德尔菲(Delphi)调查方法,从安全素养、心理因素、飞行技术及生理因素4个方面确定影响飞行员安全行为的指标体系构成.以飞行员行为评价实例,运用序关系法并结合专家调查确定各评价指标的权重系数,分析了职业安全意识、飞行情景意识、特情处理能力以及机组资源管理能力等17个指标对飞行安全行为的显著性影响程度,结论为飞行员安全行为风险分析提供参考.     

基于云模型的三维土工网防护边坡侵蚀稳定性综合评价

在分析各项影响因素分级标准的基础上,建立了三维土工网护坡侵蚀稳定性的综合评价体系.针对三维土工网边坡侵蚀稳定性分析中不确定性问题,将云模型理论引入到综合评判中,实现了定性与定量的不确定性转换.通过构建前件云发生器和后件云发生器,利用不确定推理,确定各项评价指标的具体分值.借助层次分析法与敏感度分析确定各项评价指标的权重,进而得出综合评价体系的整体得分.工程实例计算结果证实了模型的实用性和有效性,为三维土工网防护边坡侵蚀稳定性的评价提供了一条新的途径.     

An Optimal L∞–error Estimate for an Approximation of a Parabolic Variational Inequality

In this article, an optimal error estimate for parabolic variational inequalities is studied. Existence and uniqueness of the solution is provided by the introduction of a constructive algorithm. An optimally L^∞-asymptotic behavior in uniform norm is proved using the semi-implicit time scheme combined with the finite element spatial approximation. The approach is based on the concept of subsolutions.