Effect of ethylene-co-vinyl acetate-glycidylmethacrylate and cellulose microfibers on the thermal,rheological and biodegradation properties of poly(lactic acid) based systems

The properties and biodegradation behavior of blends of poly(lactic acid) (PLA) and ethylene-vinyl acetate-glycidylmethacrylate copolymer (EVA-GMA), and their composites with cellulose microfibers (CF) were investigated. The blends and composites were obtained by melt mixing and the morphology, phase behavior, thermal and rheological properties of PLA/EVA-GMA blends and PLA/EVA-GMA/CF composite films were investigated as a function of the composition. The disintegrability in composting conditions was examined by means of morphological, thermal and chemical analyses to gain insights into the post-use degradation processes. The results indicated a good compatibility of the two polymers in the blends with copolymer content up to 30 wt.%, while at higher EVA-GMA content a phase separation was observed. In the composites, the presence of EVA-GMA contributes to improve the interfacial adhesion between cellulose fibers and PLA, due to interactions of the epoxy groups of GMA with hydroxyls of CF. The addition of cellulose microfibers in PLA/EVA-GMA system modifies the rheological behavior, since complex viscosity increased in presence of fibers and decreased with an increase in frequency. Disintegration tests showed that the addition of EVA-GMA influence the PLA disintegration process, and after 21 days in composting conditions, blends and composites showed faster degradation rate in comparison with neat PLA due to the different morphologies induced by the presence of EVA-GMA and CF phases able to allow a faster water diffusion and an efficient PLA degradation process.     

MICELLE FORMATION BY ANIONIC AND CATIONIC SURFACTANTS IN AQUEOUS 18-CROWN-6 ETHER,P-CYCLODEXTRIN,AND 1,10-PHENANTHROLINE SOLUTIONS AT DIFFERENT TEMPERATURES

The conductances of sodium perfluorooctanoate (SPFO), sodium dodecylsulphate (SDS), dodecyltrimethylammonium bromide (DTAB), and tetradecyltrimethylammonium bromide (TTAB) in 18-crown-6 ether + water (CR+W), p-cyclodextrin + water (CY+W), and 1,10-phenanthroIine + water (Phen+W) mixtures with fixed 4 mM of each additive were determined over the temperature range of 5-55 °C. The conductivity plots for all the surfactants showed single break from which the critical micellization concentration (cmc) and degree of micelle ionization (x) were computed. From the pre and the post micellar slopes of the conductivity curves, the equivalent conductivities of the monomeric (Aass) and the micellar states (Amjc), respectively, were calculated and discussed with respect to the surfactant-additive complexation. It was observed that the micelle formation of all the ionic surfactants irrespective of the nature of their head groups were delayed in CYC+W in comparison to that in CR+W and Phen+W systems over the temperature range studied. The micelle formation of SPFO and SDS in CR+W and Phen+W systems showed stabilization of the respective micelles due to the adsorption of Na⁺-CR and Na+-Phen complexes at the micelle solution interface in comparison to that of DTAB and TTAB.     

Liquid-Crystal Based Formulations for Topical Drug Delivery

Monoolein, being a biocompatible and bioadhesive penetration enhancer that can form liquid crystalline (LC) phases, possesses remarkable characteristics for addressing drug delivery systems across the biological membrane. A range of formulations based on LC phases were investigated in this study, which includes lamellar, reverse hexagonal, and bicontinuous cubic phases along with an emulsion stabilized by LC phases. Caffeine was chosen as hydophilic model drug to evaluate in vitro release performance. The different monoolein based caffeine formulations were characterized by techniques such as polarized light microscopy, nuclear magnetic resonance (NMR) and small angle x-ray scattering (SAXS). The release experiments, performed through Franz diffusion cells, revealed that the presence of a liquid crystalline (LC) phase prevented burst release in all cases. In addition, taking into consideration that all ingredients are fully biocompatible, the creamy emulsion formulation stabilized by a hexagonal lipid LC phase can be proposed as a challenging preformulation for topical drug delivery.     

Relationship Between the Polymer Structures and Destabilization of Polymer‐Containing Water‐in‐Oil Emulsions

The viscous properties, scanning electronic microscopy (SEM), and water/oil interfacial tension (IFT) of partially hydrolyzed polyacryamide (HPAM) and hydrophobically associating hydrolyzed polyacryamides modified with N‐dodecylacrylamide were studied with the objective of investigating the influence on destabilization of emulsions. As expected, the copolymers exhibit significant viscosity enhancing capacity and three‐dimensional network structures due to intermolecular hydrophobic associations, and also present high interfacial activities as the IFT decrease with increasing polymer concentration. As a result, the existences of copolymers increased both the viscosity of emulsions and the intensity of interfacial film, in which case slow down the diffusion of demulsifier molecules and enhance the stability of emulsions, finally, the separation of water from oil becomes more difficult.     

Application of the Combustion Method in a Closed Flask to the Lead Determination in Atmospheric Aerosols

Abstract

The destruction of the filter for metal determination in atmospheric aerosols is an important step in the analysis. Nowadays the decomposition of this kind of sample has not been completely solved, so it is interesting to study new methods for filter sample attack. In the present work the application of the combustion method in a closed flask for mixed cellulose esters filter decomposition for lead determination is proposed. For this purpose optimum operating conditions as stopper flask design, sample size, flask volume, shaking time and volume and concentration of absorbing solution are established, and accuracy and precision of the proposed method using AAS for the measurements is given. The results obtained by the closed flask combustion are compared with those found by wet attack with HNO₃. The method proposed is rapid, has low reagent contamination and no loss of lead by volatilization or by amalgamation occurs. This method shows an accuracy and a precision in good agreement with the standard method.     

Handling of Environmental and Biological Samples via Pre-Column Technologies

Abstract

Sample handling is still a weak point in chromatography and in analytical chemisty in general. One consideration is the automation potential of new procedures. Solid-liquid extraction techniques in combination with pre-column technology are particularly promising in this regards. The construction and geometry of pre-columns both for conventional and narrow-bore HPLC are of major importance, since band broadening should be kept at a minimum for an optimal functioning of the analytical system. The various operations that can be carried out with such a pre-column are trace-enrichment, clean-up of the sample which depends on the type of adsorbents used in the precolumn, i.e., polar or apolar materials, ion exchangers or metal covered surfaces, etc., protection of the analytical column, field sampling and storage of samples and as a substrate for on-column chemical derivatizations. These various operations are demonstrated with practical examples from the fields of environmental and biological analysis. The selectivity can be further enhanced by coupling precolumn technology with selective detection modes such as diode array UV, electrochemical or fluorescence detection. This enables the construction of optimal and integrated analysis sytems which are fully automated and microprocessor controlled. They can also be made compatible with miniaturized LC-technology.     

A Quality Assurance Study for the Analysis of Hydrocarbons in Sediments

Abstract

Two exercises (MEDCAL I and II) were conducted in our Department during November 1984 and October 1986, with participants from the Mediterranean region, for testing the IOC Manual for the determination of petroleum hydrocarbons in sediments (IOC, Manuals and Guides, No. 11).

The gas chromatographic analysis of the saturated hydrocarbon fraction provided, at the best, a precision of 60% (relative standard deviation RSD) for n-alkanes (mean conc. 0.89 μg/g) and 56 % for the unresolved complex mixture (UCM) (mean conc. 16μg/g). The CPI and the pristane/phytane ratio provided better results (13% RSD). The aromatic fractions, analysed by UV-fluorescence, yielded in total a mean concentration of 10μg/g of chrysene equivalents with a 49% RSD.

The extraction-partition step was confirmed to be the main source of error in the analysis because when the results were corrected for recoveries, the RSD were reduced to 17, 30 and 6% for n-alkanes, UCM and total aromatics, respectively. Our reference intra-laboratory precision was, respectively, 18, 14 and 14%.     

Development and Optimization of Twenty-Four Hour Manual Methods for the Collection and Colorimetric Analysis of Atmospheric NO2

Abstract

Manual twenty-four hour colorimetric procedures for the determination of atmospheric NO₂ are described. The methods are based on collecting NO₂ by bubbling ambient air for twenty-four hours through reagents that form stable nitrite solutions. The reagents described have a 93 % collection efficiency over the range of 20 to 750 μg/m³ NO₂ with no apparent interferences. The inadequacies' of the former reference or alkaline method¹ are also described.     

基于改进粒子群优化算法的火电厂机组负荷分配

以坑口电厂SIS系统机组负荷优化分配功能模块为应用背景,针对基本粒子群优化算法易陷入局部收敛、收敛速度慢的缺点,提出一种基于惯性权重非线性减小策略的改进粒子群优化算法。并且通过MATLAB与Visual C++混合编程,开发了机组负荷在线优化分配功能模块,提高了算法的计算效率和工程应用价值。