Swelling behavior and mechanical properties of endlinked poly (dimethylsiloxane) networks and randomly crosslinked polyisoprene networks

Measurements of the equilibrium degree of swelling and of the equilibrium modulus were performed on poly(dimethylsiloxane) networks (PDMS) and on polyisoprene vulcanizates. The results support the concept that topological interactions between network chains, e.g. entanglements or the like, have a large influence on the rubber elastic behavior, at least within a certain range of network densities.PDMS networks having network chains of different lengths and varying functionlities of the crosslinks were prepared in bulk by endlinking fractionated ,-divinyl PDMS via multifunctional hydrogen-siloxanes (f=3 to 22). Natural rubber (NR) and synthetic liquid polyisoprene (IR) were cured in bulk with various amounts of dicumyl peroxide to give randomly crosslinked samples.The experimentally determined moduli and degrees of swelling were compared with theoretical predictions based on the phantom network theory and affine network theory, taking into account only chemical crosslinks. The observed discrepancies can be traced back to a contribution of topological interactions (trapped entanglements) to the total effective network density. The modulus and swelling data are consistent, thus ruling out non-equilibrium effects.     

Continuous fermentation for the production of citric acid from glucose

Citric acid is finding new areas of use each year and the demand for the acid is constantly increasing. Being a bulk chemical, the continuous production of citric acid would be advantageous. The paper presents the results from ammonia limited batch and continuous fermentations using the yeast strainSaccharomycopsis (Candida) lipolytica (NRRL Y-7576). Mathematical models were developed for growth and glucose utilization in batch and continuous culture. Cell and acid yields appeared to be almost the same in batch and continuous culture. The specific production rates were found to be constant, equal to 0.053 g/g h, in the batch fermentations but varied in the continuous experiments from 0 to 0.11 g/g h depending on the fermentation conditions. Continuous production in a single stage CSTR was studied for over 1,000 hours without shutdown.     

Synthesis and Crystal Structure of 2-Chloromethyl-1H-benzimidazole Nitrate, [ClCH_2(C_7H_6N_2)]NO_3

1 INTRODUCTION Benzimidazole is an interesting heterocyclic compound because it is found in various naturally occurring drugs, such as omeprazole, astemizole and emedastine difumarate[1]. The efficacy of sub- stituted benzimidazoles in the treatment of parasitic infections is well known[2～4]. Substituted benzimid- azole moieties are established pharmacophores in parasitic chemotherapy. Bis(2-benzimidazole) and some substituted bis(benzimidazol-2-yl)alkanes have attracted much interest …     

Preparation of novel,high‐modulus,swollen‐ or jungle‐gym‐type polyimide gels end‐crosslinked with 1,3,5‐tris(4‐aminophenyl)benzene

A novel preparation approach for high‐performance polyimide gels that are swollen or have a jungle‐gym‐type structure is proposed. A new rigid and symmetric trifunctional amine, 1,3,5‐tris(4‐aminophenyl)benzene (TAPB), was synthesized as a crosslinker. Three different kinds of amic acid oligomers derived from pyromellitic dianhydride (PMDA), 4,4′‐oxydiphthalic anhydride (ODPA), p‐phenylenediamine (PDA), and 4,4′‐oxydianiline (ODA) were end‐crosslinked with TAPB at a high temperature to make polyimide networks with different structures. Transparent polyimide gels were obtained from the ODPA–ODA/TAPB series with high compression moduli of about 1 MPa at their equilibrium swollen states in N‐methylpyrrolidone. Microscopic phase separation occurred during the gelation–imidization process when polyimide networks were generated from PMDA–PDA/TAPB and PMDA–ODA/TAPB. After these opaque polyimide networks were dried, a jungle‐gym‐like structure was obtained for the PMDA–PDA/TAPB and PMDA–ODA/TAPB series; that is, there was a high void content inside the networks (up to 70%) and little volume shrinkage. These polyimide networks did not expand but absorbed the solvent and showed moduli as high as those of solids. Therefore, using the highly rigid crosslinker TAPB combined with the flexible monomers ODPA and ODA and the rigid monomers PMDA and PDA, we prepared swollen, high‐performance polyimide gels and jungle‐gym‐type polyimide networks, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2501–2512, 2002     

Production and energetic use of biogas from energy crops and wastes in Germany

The production of biogas for reducing fossil CO₂ emissions is one of the key strategic issues of the German government and has resulted in the development of new process techniques and new technologies for the energetic use of biogas. Progress has been made in cultivating energy crops for biogas production, in using new reactor systems for anaerobic digestion, and in applying more efficient technologies for combined heat and power production. Recently, integration of fuel cells within the anaerobic digestion process was started, and new technologies for biogas upgrading and conversion to hydrogen were tested. This article describes the trends in Germany for achieving more efficient energy production.     

Impulsive generalized function synchronization of complex dynamical networks

This Letter investigates generalized function synchronization of continuous and discrete complex networks by impulsive control. By constructing the reasonable corresponding impulsively controlled response networks, some criteria and corollaries are derived for the generalized function synchronization between the impulsively controlled complex networks, continuous and discrete networks are both included. Furthermore, the generalized linear synchronization and nonlinear synchronization are respectively illustrated by several examples. All the numerical simulations demonstrate the correctness of the theoretical results.     

Esters flash point prediction using artificial neural networks

In this article, an artificial neural network to predict the flash point of 95 esters was implemented. Four variables were used for its development. A neural network with 4‐5‐8‐5‐1 topology was encountered to gain the best agreement of the experimental results with those predicted (square correlation coefficient (R²) and root mean square error were 0.99 and 5.46 K for the training phase and 0.96 and 13.02 K for the testing set). © 2012 Wiley Periodicals, Inc.     

On clique relaxation models in network analysis

Increasing interest in studying community structures, or clusters in complex networks arising in various applications has led to a large and diverse body of literature introducing numerous graph-theoretic models relaxing certain characteristics of the classical clique concept. This paper analyzes the elementary clique-defining properties implicitly exploited in the available clique relaxation models and proposes a taxonomic framework that not only allows to classify the existing models in a systematic fashion, but also yields new clique relaxations of potential practical interest. Some basic structural properties of several of the considered models are identified that may facilitate the choice of methods for solving the corresponding optimization problems. In addition, bounds describing the cohesiveness properties of different clique relaxation structures are established, and practical implications of choosing one model over another are discussed.     

Influence of cell and LC parameters on the dynamics of STN liquid crystal displays

The dynamics of super-twisted nematic (STN) liquid crystal displays have rarely been studied. In this article, the dynamic response of STN is analysed in detail. The evolution of director configuration with time was obtained by solving Ericksen–Leslie hydrodynamic equations. The time varying midlayer tilt angle is presented as a measure of dynamic response. The influence on STN dynamics of cell parameters including pretilt angle, twist angle, cell thickness, and of material parameters including d/p, K ₂₂, K ₃₃, were studied.