基于离散网格的流形曲面构造综述

基于离散网格的流形曲面构造技术不仅能够生成具有高阶光滑性的曲面,并且该曲面可以是任意拓扑结构的.此外,在构造流形曲面时,无需进行额外的拼接操作,克服了传统曲面造型技术在进行面片之间的拼接时,计算量增大以及曲面光滑性难以保证的难题.本文介绍了流形曲面构造的流程以及构造过程中的难点,然后将目前已有的流形曲面构造技术分为三大类:传统意义上的流形构造方法;基于规范区域的流形构造方法;基于样条曲面推广的流形构造方法.并对每一类都进行详细地分类介绍.最后,对其作一个总结以及对未来的展望.     

稳健残差控制图的构建及在金融时序中的应用

对于呈现自相关和波动族聚性并存的受控过程,通常采用残差控制图对其进行监控。但异常点的存在会对自相关或波动族聚性模型的拟合产生重要影响,使得基于该模型的残差并非独立同分布导致常规残差控制图监控失效。为解决这类问题,本文提出稳健残差控制图。即建立稳健的ARMA模型解决自相关问题从而得到无自相关的残差序列,用稳健的GARCH模型来构建控制图的上下限。模拟和实证研究表明,本文提出的稳健残差控制图具有很好的抗异常点能力并能更好的对金融时间序列的异常现象进行监控。     

Phase II monitoring of changes in mean from high‐dimensional data

The generalized T² chart (GT‐chart), which is composed of the T² statistic based on a small number of principal components and the remaining components, is a popular alternative to the traditional Hotelling's T² control chart. However, the application of the GT‐chart to high‐dimensional data, which are now ubiquitous, encounters difficulties from high dimensionality similar to other multivariate procedures. The sample principal components and their eigenvalues do not consistently estimate the population values, and the GT‐chart relying on them is also inconsistent in estimating the control limits. In this paper, we investigate the effects of high dimensionality on the GT‐chart and then propose a corrected GT‐chart using the recent results of random matrix theory for the spiked covariance model. We numerically show that the corrected GT‐chart exhibits superior performance compared to the existing methods, including the GT‐chart and Hotelling's T² control chart, under various high‐dimensional cases. Finally, we apply the proposed corrected GT‐chart to monitor chemical processes introduced in the literature.     

岩体质量分级的风险分析方法

提出了基于RMR岩体质量分级系统的岩体质量研究风险分析方法。该方法分析步骤如下 :(1)通过岩芯样品的现场观测和实验室试验获得分类所需的变量 ;(2 )统计分析拟合得出各变量的分布函数及参数 ;(3)运用Monte Carlo模拟方法获得 2万个RMR值 ,并将结果绘成岩体质量描述图 ;(4)利用以上结果作出岩体质量风险分析评价。该方法用于润扬长江公路大桥岩体质量评价研究获得良好效果     

Bayesian statistical process control for Phase I count type data

Count data, most often modeled by a Poisson distribution, are common in statistical process control. They are traditionally monitored by frequentist c or u charts, by cumulative sum and by exponentially weighted moving average charts. These charts all assume that the in‐control true mean is known, a common fiction that is addressed by gathering a large Phase I sample and using it to estimate the mean. “Self‐starting” proposals that ameliorate the need for a large Phase I sample have also appeared. All these methods are frequentist, ie, they allow only retrospective inference during Phase I, and they have no coherent way to incorporate less‐than‐perfect prior information about the in‐control mean. In this paper, we introduce a Bayesian procedure that can incorporate prior information, allow online inference, and should be particularly attractive for short‐run settings where large Phase I calibration exercises are impossible or unreasonable.     

基于相似度和改进雷达图的概率犹豫模糊多属性决策方法

为了解决属性权重未知的概率犹豫模糊多属性决策问题,构建基于相似度和改进雷达图的多属性决策方法。首先基于概率犹豫模糊元的信息完全度构建概率犹豫模糊集的距离测度和灰色关联系数,然后基于灰色关联理想解法定义了概率犹豫模糊集的相似度,最后根据概率犹豫模糊集的相似度和改进雷达图构建多属性决策模型,并通过案例进行了验证分析。     

噪声模态单元预判的经验模态分解脉冲星信号消噪

为了改善脉冲星辐射脉冲信号的消噪效果, 提出了一种基于噪声模态单元预判的经验模态分解(EMD) 消噪声方法. 该方法首先利用EMD将含噪辐射脉冲信号分解为一组内蕴模态函数(IMF), 根据IMF系数的统计特性采用局部均方误差准则进行噪声模态单元预判, 并将噪声模态单元置零; 然后对噪声模态单元预判处理后的IMF以模态单元为基本单位进行最优比例萎缩消噪, 从而达到抑制噪声、保留信号的目的. 实验结果表明: 与Sure Shrink小波阈值法、Bayes Shrink小波阈值法和EMD模态单元比例萎缩法相比, 基于噪声模态单元预判的EMD消噪方法可以更有效地去除脉冲辐射信号中的噪声, 同时更好地保留信号突变处的细节信息特征, 在信噪比、 均方误差、峰值相对误差、峰位误差和相位误差等方面都有一定程度的改善. 关键词： 脉冲星信号消噪 经验模态分解 噪声模态单元预判 局部均方误差     

光电倍增管在磷酸液声致发光实验中的应用

对不同厚度液体进行光强测量,深入探索空化气泡的运动,研究发光机理很有意义。用超声激励法在磷酸液体中实现多泡声致发光,研究不同共振频率下发光的特点。利用光电倍增管多次测量发光强度相互比较,结果是在液体厚度10 cm、驱动频率f=21.061kHz和f=20.316kHz时,周期性较好为50μs,液体通过漩涡集中气泡可以使更多气泡发光;在液体厚度3 mm、驱动频率f=17.91kHz和f=19kHz时,周期性很好为25μs;且光信号都较强。结论是磷酸中声致发光强度、周期与液体厚度、驱动频率密切相关。本文以磷酸液多泡声致发光实验研究为基础,从内部和外部原理来出发,详细介绍了光电倍增管在多泡声致发光光强测量中的实用,为今后研究者提供了一些经验。根据实验过程中遇到的一些实际问题提出了建议和改善意见。     

有偏总体的极差控制图

根据加权标准差方法建立有偏总体的极差控制图,它基于有偏总体来计算对应于正态分布的控制图常数,根据样本数据的偏度来计算上下控制限,对于总体是对称分布,该控制图退化为标准的休哈特控制图.最后,用蒙特卡洛方法给出了改进的控制图常数.     

Design of an Athermalized Hybrid Single Lens in the 3-5μm Wavelength Band

With recent advances in technology, diffractive lenses can be used for a variety of applications. In this paper, the diffractive lenses are treated on an athermal chart which is developed for refractive lenses. An athermalized hybrid single lens designed with the chart, operating in the 3-5 μm wavelength band is presented.