半导体脉冲功率开关的最新进展

简述了脉冲功率开关的发展及国内外脉冲功率晶闸管产品的现状,并详细介绍了国内的脉冲功率开关产品及其特点。阐述了脉冲功率晶闸管组件产品的设计与应用,以及半导体脉冲功率开关的测试试验平台。简要介绍了脉冲功率晶闸管及其组件在工程应用中的同步驱动、感应取能和串联均压等关键技术,并简述了脉冲功率晶闸管组件的工程应用实际效果。阐述了半导体脉冲功率开关及其测试试验平台的发展方向。     

紧凑型P波段相对论返波振荡器的粒子模拟

设计了一种紧凑型P波段相对论返波振荡器,其电动力学结构是由同轴慢波结构和同轴引出结构组成的。同轴慢波结构缩小了器件的径向尺寸;同轴引出结构缩短了器件的轴向长度,且提高了束波作用效率。通过粒子模拟研究了器件内束波作用的物理过程,模拟结果表明：器件具有结构紧凑、束波作用效率高的特点。在二极管电压700 kV,电流7 kA,导引磁场1.5 T时,器件在频率833 MHz处获得较高的微波输出,饱和后输出微波的平均功率达1.58 GW,效率约为32%,器件电磁结构尺寸仅为108 mm×856 mm。     

高功率准连续激光二极管抽运的Nd：YVO4激光器

对高功率准连续激光二极管端面抽运的Nd:YVO4固体激光器进行了实验研究。研究了抽运功率、温度、重复率及输出镜的透过率对激光器输出功率的影响。当激光二极管重复率达到720Hz、抽动功率33.2W时,激光输出最大平均功率为11W。     

火力发电厂废水中悬浮物处理的影响因素探讨

对火力发电厂废水中悬浮物处理的影响因素如pH值、水温、接触介质、进水水质、混凝剂加入量等进行分析，对主要影响因素水温和混凝剂加入量进行了试验分析，制定出废水悬浮物处理的合理方案。     

Evolution of molecular weight distributions in the catalytic chain transfer polymerization of methyl methacrylate up to high monomer conversions

The evolution of molecular weight distributions (MWDs) with monomer conversion in the catalytic chain transfer (CCT) polymerization of methyl methacrylate at 60 °C is investigated by simulation (via the program package PREDICI®) and experiment. A Co(III)‐based complex is used as the precursor for the CCT agent, which is formed in situ by initiator‐derived (2,2′‐azobisisobutyronitrile) radicals to yield the catalytically active Co(II) species. The small shifts seen in the MWD toward lower molecular weights with increasing monomer conversion are shown to be of the same order of magnitude as the associated changes in the MWD in non‐CCT controlled free‐radical polymerization, indicating that no significant change in the MWD with monomer conversion is associated with the CCT process. These results are compared to the evolution of MWDs in conventional chain transfer polymerizations with thiols as transfer agents. A clear shift toward higher molecular weights is seen with increasing monomer conversion, indicating disparate rates of thiol and monomer consumption. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3303–3312, 2000     

A comparative study of CE-SDS,SDS-PAGE,and Simple Western: Influences of sample preparation on molecular weight determination of proteins

The development of capillary electrophoresis, especially CE-SDS devices, has led CE-SDS to become an established tool in a wide range of applications in the analysis of biopharmaceuticals and is increasingly replacing its method of origin, SDS-PAGE. The goal of this study was to evaluate the comparability of molecular weight (MW) determination especially by CE-SDS and SDS-PAGE. For ensuring comparability, model proteins that have little or no posttranslational modifications and an IgG antibody were used. Only a minor influence of sample preparation conditions, including sample buffer, temperature conditions, and different reducing agents on the MW determination were found. In contrast, the selection of the MW marker plays a decisive role in determining the accurate apparent MW of a protein. When using different MW markers, the deviation in MW determination can exceed 10%. Interestingly, CE-SDS and 10% SDS-PAGE hardly differ in their trueness of MW determination. The trueness in relation to the reference MW for each protein was calculated. Although the trueness values for the model proteins considered range between 1.00 and 1.11 using CE-SDS, they range between 0.93 and 1.03 on SDS-PAGE, depending on the experimental conditions chosen.     

Towards advanced circuit board materials: adhesion of copper foil to ultra‐high molecular weight polyethylene composite

Polyethylene based composites are attractive materials for advanced circuit board applications because of their unique combination of properties: low dielectric constant and loss factor, light weight, high flexural modulus and low thermal expansion coefficient controlled in all spatial directions. This investigation describes a process to consolidate chopped fibers of ultra‐high molecular weight polyethylene concurrently with its bonding to a copper foil. Bonding is affected by a thin sheet of low‐density polyethylene, incorporating a crosslinking agent with a concentration gradient across the sheets thickness. In this single step process, the composite material is formed and bonded to the metal foil, achieving good adhesion without the use of extraneous glue. Copyright © 2002 John Wiley & Sons, Ltd.     

Controlled ring-opening polymerization of cyclic carbonates and lactones by an activated monomer mechanism

This article reviews recent topics in the controlled synthesis of polycarbonates and polylactones with small polydispersity indices by activated monomer cationic ring-opening polymerizations, especially with new initiator systems, such as alcohol/protonic acid and boron alkoxide/protonic acid. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2190–2198, 2002     

New PVC materials for medical applications—the release profile of PVC/polycaprolactone–polycarbonate aged in aqueous environments

Medical grade PVC plasticised with polycaprolactone–polycarbonate (PCL–PC) was subjected to aqueous environments at different temperatures. The release profile during ageing was determined by solid phase microextraction (SPME) and GC–MS. At the same time changes in the surface composition due to, for example, migration of PCL–PC from the blend were followed by FTIR. Almost no changes in the material or its surface composition were observed during 98 days at 37 °C in water or phosphate buffer. Only trace amount of 6-hydroxyhexanoic acid the final hydrolysis product of PCL–PC was detected in the GC–MS chromatograms and the weight loss was negligible. Even when the ageing temperature was raised to 70 °C only minor increase in the amount of 6-hydroxyhexanoic acid was observed and the weight loss after 98 days was under 1%. Changes in the FTIR spectra indicating migration of PCL–PC towards the surface of the PVC/PCL–PC tubing were observed first after 70 days at 70 °C. Large increase in the hydrolysis rate of PCL–PC and almost complete depletion of PCL–PC from the blend was observed when the ageing temperature was raised to 100 °C.     

Inhibition of CTAB on the Corrosion of Mild Steel in Hydrochloric Acid

The inhibition effect of cetyl trimethyl ammonium bromide (CTAB) on the corrosion of mild steel in 1.0 mol L^?1 hydrochloric acid (HCl) has been studied at different temperatures (25–60°C) by weight loss and potentiodynamic polarization methods. The results reveal that CTAB behaves as an effective inhibitor in 1.0 mol L^?1 HCl, and the inhibition efficiency increases with the inhibitor concentration. Polarization curves show that CTAB is a mixed-type inhibitor in hydrochloric acid. The results obtained from weight loss and polarizations are in good agreement. The effect of immersion time on corrosion inhibition has also been examined and is discussed. The adsorption of inhibitor on mild steel surface obeys the Langmuir adsorption isotherm equation. Thermodynamic parameters have been obtained by adsorption theory. The inhibition effect is satisfactorily explained by the parameters.