Determination of cake thickness and porosity during cross-flow ultrafiltration on a plane ceramic membrane surface using an electrochemical method

The thickness and the porosity of a deposit during ultrafiltration experiments are determined using an electrochemical method. Twenty microelectrodes are mounted flush to a ceramic plane membrane and maps of deposit thickness are determined for three inlet/outlet distributors configurations. Combining an electrochemical method and a step transient method, the determination of the thickness and the porosity of a particles deposit is performed. These local thickness and porosity values are analyzed thanks to wall shear stress local measurements obtained in a previous work [Sep. Sci. Technol. 37 (10) (2002) 2251]. The results emphasize the heterogeneity of the deposit thickness, especially in zones of low wall shear stress. Furthermore, the porosity values of the deposit are ranged between 0.3 and 0.8 as a function of the location at the membrane surface.     

Physico-Chemistry of the Limestone Sulphation Process

Aspects of the mechanism of the overall reaction between CaCO₃/CaO and SO₂/SO₃ under oxidizing conditions are discussed. The limestone and lime sulphation processes were carried out in a thermobalance under conditions relevant to atmospheric fluidized bed combustion. Sulphated samples, prepared in the form of cross-section particles, were examined in a scanning electron microscope by energy-dispersive X-ray and back-scattered electron imaging. Photomicrographs are presented. The reaction proceeded from the outer surface of the particles and along the pores. Surface textural changes during the reaction were considered. The layer of products was identified as controlling both the rate and extent of limestone/lime sulphation. In the products, two sulphur-bearing solids (CaSO₄ and CaS) were identified. The presence of CaS, which may cause difficulties in practice, is attributed to CaSO₃ disproportionation. This revised version was published online in August 2006 with corrections to the Cover Date.     

Enhancement of the light-scattering ability of coatings by using hollow pigments

The light-scattering properties of coatings based on monodisperse polymeric spheres of two different diameters (ca 0.5 and 1 m) were evaluated from reflectance measurements as a function of the wavelength from 400 to 700 nm. Some of these plastic pigments were hollow and it was noted that these particles gave coatings with a greater light-scattering ability than coatings based on solid particles of a similar size. It was possible to estimate the contribution of the internal pores to the scattering ability of the coating layers by saturating the layers with an oil of a refractive index similar to that of the polymeric pigment particles. A simple model accounting for the scattering provided by the internal pores of the hollow particles is suggested. The agreement between the experimental results and the prediction of the model is fair. It was noted that the light scattering coefficient of the coatings increased when the external diameter of their constituent hollow particles increased from ca 0.5 to 1 m.     

Effect of Hydration–Dehydration Processes on the Structure and Porosity of Detemplated Silica Fibers

A study was carried out on the conditions of template removal (calcination or extraction by solvents) and hydration–dehydration processes on the hexagonal structure and porosity of detemplated fibers. The hydration–dehydration cycle leads to a decrease in fiber porosity, especially in fiber detemplation by extraction with surfactant solvents such as ethanol and acetic acid.     

高多孔度多孔硅自支撑膜的制备与表征

发光多孔硅由于在光电子学方面的应用前景而引起人们极大的关注[1]．最近多孔硅发光二极管的研究方面取得了重大进展[2]。但是，有关多孔硅的发光机制仍然存在着争论[1，3，4]，利由于消除了单晶硅衬底的影响，对脱离了硅衬底的多孔硅自支撑膜能够进行普通多孔硅所不能进行的一     

Degree of hydration in cement paste and C<Subscript>3</Subscript>A-sodium carbonate-water systems

This research provides a fundamental understanding of the early stage hydration of Portland cement paste, tricalcium aluminate (C₃A) paste at water to cement ratio of 0.5 and C₃A suspension at water to cement ratio of 5.0 modified by 2 or 4 mass% of sodium carbonate. A high conversion of unreacted clinker minerals to gel-like hydration products in the cement-Na₂CO₃ pastes takes place rapidly between 1^st to 24^th h. Contrary the Ca(OH)₂ formation within the same time interval is retarded in the excess of CO₃²⁻ ions due to intensive rise and growth of CaCO₃ crystals in hydrated cement. Later, the conversion of clinker minerals to the hydrate phase is reduced and higher contents of calcite and vaterite relative to that of Ca(OH)₂ in comparison with those found in the Portland cement paste are observed. As a consequence a decrease in strength and an increase in porosity between hardened Portland cement paste without sodium carbonate and those modified by Na₂CO₃ are observed. C₃A hydrates very quickly with sodium carbonate between 1^st and 24^th h forming hydration products rich in bound water and characterized also by complex salts of (x)C₃A·(y)CO₂·(zH₂O type, whereas C₃A-H₂O system offers C₃AH₆ as the main hydration product. Higher content of the formed calcium aluminate hydrates in C₃A-Na₂CO₃-H₂O system also contributes to early strength increase of Portland cement paste.     

考虑二次梯度项及动边界的双重介质低渗透油藏流动分析

在传统试井模型的非线性偏微分方程中根据弱可压缩流体的假设,忽略了二次梯度项,对于低渗透油藏这种方法是有疑问的.低渗透问题一个显著的特点就是流体的流动边界随着时间不断向外扩展.为了更好地研究双重介质低渗透油藏中流体的流动问题,考虑了二次梯度项及活动边界的影响,同时考虑了低渗透油藏的非达西渗流特征,建立了双重介质低渗透油藏流动模型.采用Douglas-Jones预估-校正差分方法获得了无限大地层定产量生产时模型的数值解,分别讨论了不同参数变化时压力的变化规律及活动边界随时间的传播规律,还分析了考虑和忽略二次梯度项影响时模型数值解之间的差异随时间的变化规律,做出了典型压力曲线图版,这些结果可用于实际试井分析.     

稠油油藏高温盐析调剖的孔渗表征方法研究

深层高温油藏在开采过程中,由于近井地带压力变化剧烈,地层水蒸发致使结晶盐析出,进而导致储层孔隙度、渗透率降低.为研究稠油油藏高温盐析调剖的孔渗变化规律,根据盐类溶解/沉淀原理及储层孔隙度渗透率关系和填砂管模型高温盐析实验结果,建立了考虑地层水蒸发、水中氯化钠析出和储层孔渗变化的综合盐析模型.研究结果表明:随着堵剂注入量...     

SiCp/Y112铝基复合材料制备工艺及性能

3种不同铸造工艺条件下铝基复合材料的微观组织,并对其硬度进行了测定.研究表明:与全液态铸造法和半固态铸造法相比,搅熔铸造制备的SiCp/Y112铝基复合材料,其增强相SiC颗粒分布均匀,气孔率较少.是一种较理想的金属基复合材料制备工艺.未增强的Y112基体铝合金的维氏硬度高于其半固态坯料的维氏硬度;而SiCp/Y112铝基复合材料的维氏硬度明显高于基体的维氏硬度,并随着SiC颗粒的体积分数的增加其复合材料的维氏硬度不断提高.