Influence of drawing and heat treatment on surface free energies of polyethylene terephthalate fibers

The surface free energies of polyethylene terepthalate fibers with different draw ratios were experimentally determined by contact angle measurements inn-alkane/water systems. The dispersive component of the surface free energy increased with increasing draw ratio, whereas the nondispersive one remained almost constant. After heat treatment, the dispersive surface free energy increased, but was reduced above 140°C. The nondispersive component increased by heat treatment at 190°C. The increases in the density and birefringence of the fibres due to the drawing and heat treatment suggested that the increase in the dispersive surface free energy was caused by the increase in the atomic density at the fiber surface due to drawing and heat treatment. ESCA results indicated that the increment in the nondispersive surface free energy due to heat treatment was caused by the addition of functional groups to the fiber surface due to heat treatment.     

Determination of dispersive and nondispersive components of the surface free energy of glass fibers

The dispersive component _s ^d of the surface free energy of glass fibers and its interaction energy with alkanes, benzene, 1-nitropropane, ethyleneglycol, glycerol, formamide, and water were quantitatively determined by the tensiometric method within two liquids. The values of nondispersive interaction energy I _SL ^p were found to be a linear function of the square root of the nondispersive component of the surface free energy of liquids. This suggests that the nondispersive interaction energy may be represented by the geometric mean of the nondispersive component of the surface free energy of a solid and a liquid. The slope gave the nondispersive component _s ^p of the surface free energy. The _s ^p values are 33 and 14 mJ/m² for the untreated and aminosilane-treated fibers, respectively, suggesting that organophilic character has developed on the surface after aminosilane treatment. The _s ^p value was almost similar after the treatment, probably because of the polar characteristics of amino groups.     

A sequence and structural study of transmembrane helices

A comparison is made between the distribution of residue preferences, three dimensional nearest neighbour contacts, preferred rotamers, helix-helix crossover angles and peptide bond angles in three sets of proteins: a non-redundant set of accurately determined globular protein structures, a set of four-helix bundle structures and a set of membrane protein structures. Residue preferences for the latter two sets may reflect overall helix stabilising propensities but may also highlight differences arising out of the contrasting nature of the solvent environments in these two cases. The results bear out the expectation that there may be differences between residue type preferences in membrane proteins and in water soluble globular proteins. For example, the -branched residue types valine and isoleucine are considerably more frequently encountered in membrane helices. Likewise, glycine and proline, residue types normally associated with `helix-breaking' propensity are found to be relatively more common in membrane helices. Three dimensional nearest neighbour contacts along the helix, preferred rotamers, and peptide bond angles are very similar in the three sets of proteins as far as can be ascertained within the limits of the relatively low resolution of the membrane proteins dataset. Crossing angles for helices in the membrane protein set resemble the four helix bundle set more than the general non-redundant set, but in contrast to both sets they have smaller crossing angles consistent with the dual requirements for the helices to form a compact structure while having to span the membrane. In addition to the pairwise packing of helices we investigate their global packing and consider the question of helix supercoiling in helix bundle proteins.     

Theoretical study on the structure and property relationship of the cationic conjugated polyelectrolytes

A theoretical study using density functional theory was performed to understand the structure/property relationship of the cationic conjugated polyelectrolytes, poly[9,9-bis-(6′-N,N,N-trimethylammonium) hexyl] fluorene-alt-4,7-(2,1,3-benzothiadiazole)] (PFBT-X, where X = Br). The torsion angle between the fluorene and benzothiadiazole units in the PFBT monomer was found to substantially affect the structural and electronic properties of the cationic PFBT monomer. The changes of geometrical parameter, HOMO and LUMO energy levels, and band gap, as well as the absorption maximum are discussed in terms of the torsion in the PFBT monomer structure. For comparison, its neutral analogue, the monomer of poly(9,9-di-n-octylfluorene-alt-benzothiadiazole) (F8BT) was also studied. The length of conjugation backbone was also examined.     

The use of glass capillary columns for the analysis of polar natural products

Two published procedures for glass capillary column production are applied to produce capillaries for chromatography of polar natural compounds. Soda lime glass capillaries, after leaching with aqueous HCL, are either treated with colloidal silicic acid or with barium carbonate and coated with either Silar 7CP or SE 52. A test mixture as well as polar carbohydrate and peptide mixtures are chromatographed on the different columns and their chromatographic properties are evaluated. Combined capillary gas chromatography-electron impact and chemical ionization mass spectrometry are used for identification of the peptide sequence.     

苯、甲苯、一氯代苯对含水卵磷脂液晶结构影响的SAXS研究

苯及其衍生物甲苯,一氯代苯都是重要的有机试剂和化工原料,也是对人体有害的有机物。为了了解这些有机试剂对处于生物液晶态的生物膜毒害的机理,我们以含水卵磷脂组成的液晶体系作为人工模型用小角X射线散射(SAXS)方法探讨这些有机试剂对它们结构的影响。关于苯或其它非极性有机介质与含水卵磷脂形成液晶体系及其结构模型前人有一些报导。     

Superoxes,high temperature universal phases in (GC)2

Most of the common classes of organic compounds chromatograph normally on Superoxes. There is no tailing or adverse effect from excessively different activity different activity coefficients. Superoxes are therefore universal phases for gas chromatography. This is also expressed by a wide useful temperature range from ～50° to ～300°. High MW Superox-4 has a MAOT about 20° higher than the lower MW Superox-0.1. Several applications illustrating the versatility of Superox phases in (GC)² are presented.     

Upper bound of Kähler angles on the β-symplectic critical surfaces

Let (M,g) be a Kähler surface and \mathrm{\Sigma } be a \beta-symplectic critical surface in M. If L_q\left(\mathrm{\Sigma }\right) is bounded for some q>3, then we give a uniform upper bound for the Kähler angle on \mathrm{\Sigma }. This bound only depends on M,q,\beta and the L_q functional of \mathrm{\Sigma }. For q>4, this estimate is known and we extend the scope of q.     

Distinguished extensions of a lattice-ordered group

Any lattice-ordered group (l-group for short) is essentially extended by its lexicographic product with a totally ordered group. That is, anl-homomorphism (i.e., a group and lattice homomorphism) on the extension which is injective on thel-group must be injective on the extension as well. Thus nol-group has a maximal essential extension in the categoryIGp ofl-groups withl-homomorphisms. However, anl-group is a distributive lattice, and so has a maximal essential extension in the categoryD of distributive lattices with lattice homomorphisms. Adistinguished extension of onel-group by another is one which is essential inD. We characterize such extensions, and show that everyl-groupG has a maximal distinguished extensionE(G) which is unique up to anl-isomorphism overG.E(G) contains most other known completions in whichG is order dense, and has mostl-group completeness properties as a result. Finally, we show that ifG is projectable then E(G) is the -completion of the projectable hull ofG.Presented by M. Henriksen.     

Novel fluorinated block copolymer architectures fuelled by atom transfer radical polymerization

Block copolymers based on poly(pentafluorostyrene), PFS, in various numbers and of different lengths, and polystyrene are prepared by atom transfer radical polymerization (ATRP). Di- and triblock copolymers with varying amounts of PFS were synthesized employing either 1-phenylethylbromide or 1,4-dibromoxylene as initiators for ATRP. Diverse bromo(ester) (macro)initiators were also devised and involved in the formulation of fluorinated pentablock as well as amphiphilic triblock copolymers with a central polyether segment. Amphiphilic star-shaped fluoropolymers, hydrophobic fluorinated nanoparticles, or segmented fluorinated star-shaped block copolymers are further designed by use of different multifunctional initiators. The composition of the novel materials with PFS is determined by combination of SEC and ¹H NMR. Glass transition temperatures and thermal stabilities of the hydrophobic star-shaped PFSs on a six arm dipentaerythritol core are investigated in a wide range of molecular masses and further discussed.