Applications of the Poincaré sphere in polarization metrology

The Poincaré sphere representation of polarization states is used to derive two auxiliary equations for phase retardance measurements. These equations, in addition to another two previously derived equations, allow for extending the range of validity of a model for calibrating phase plates in pairs. In another application, the sphere is used to explain a new method for identifying the principal axes of two birefringent phase plates during their calibration.     

The spectral method and numerical continuation algorithm for the von Kármán problem with postbuckling behaviour of solutions

In this paper a spectral method and a numerical continuation algorithm for solving eigenvalue problems for the rectangular von Kármán plate with different boundary conditions (simply supported, partially or totally clamped) and physical parameters are introduced. The solution of these problems has a postbuckling behaviour. The spectral method is based on a variational principle (Galerkin’s approach) with a choice of global basis functions which are combinations of trigonometric functions. Convergence results of this method are proved and the rate of convergence is estimated. The discretized nonlinear model is treated by Newton’s iterative scheme and numerical continuation. Branches of eigenfunctions found by the algorithm are traced. Numerical results of solving the problems for polygonal and ferroconcrete plates are presented. Communicated by A. Zhou.     

用功的互等定理求解矩形薄板的自然频率

从虚功原理出发，证明了薄板小挠度弯曲问题的功的互等定理，并由此推出了求解矩形薄板自然频率的公式．算例表明，该公式计算简便，精度较高．     

Bending Solutions for Inhomogeneous and Laminated Elastic Plates

A procedure has been developed in previous papers for constructing exact solutions of the equations of linear elasticity in a thick plate of inhomogeneous isotropic linearly elastic material in which the elastic moduli depend in any specified manner on a coordinate normal to the plane of the plate. The essential idea is that any solution of the classical thin plate or classical laminate theory equations (which are two-dimensional theories) generates, by straightforward substitutions, a solution of the three-dimensional elasticity equations for the homogeneous material. Recently this theory has been formulated in terms of functions of a complex variable. It was shown that the displacement and stress fields in the inhomogeneous material could be expressed in terms of four complex potentials that are analytic functions of the complex variable ζ = x + iy in the mid-plane of the plate. However, the analysis performed so far applies only to the case of a plate with traction-free upper and lower faces. The present paper extends these solutions to the case where the plate is bent by a pressure distribution applied to a face.     

A coupled zigzag theory for the dynamics of piezoelectric hybrid cross-ply plates

A recently developed coupled third-order zigzag theory for the statics of piezoelectric hybrid cross-ply plates is extended to dynamics. The theory combines a third-order zigzag approximation for the in-plane displacements and a sub-layerwise linear approximation for the electric potential, considering all components of the electric field. The nonuniform variation of the transverse displacement due to the piezoelectric field is accounted for. The conditions for the absence of shear traction at the top and bottom surfaces and continuity of transverse shear stresses in the presence of electromechanical loading are satisfied exactly, thereby reducing the number of displacement variables to five, which is the same as in a first- or third-order equivalent single-layer theory. The governing equations of motion are derived from the extended Hamilton's principle. The theory is assessed by comparing the Navier solutions for the free and forced harmonic vibration response of simply supported plates with the exact three-dimensional piezoelasticity solutions. Comparisons for hybrid test, composite and sandwich plates establish that the present theory is quite accurate for the dynamic response of moderately thick plates.     

Mixed Formulations of Bending Problems for Homogeneous Elastic Plates and Beams

Mixed formulations of bending problems for homogeneous plates (beams) are proposed, whose essence is that the deformation of a plate (beam) near its fixed boundary is described by the threedimensional elasticity equations, and the remaining part by the conventional equations of plate (beam) bending. At the interface between these regions, the solutions of these equations are joined. The mixed formulation allows one to describe the threedimensional stress state in the neighborhood of the fixed boundaries of plates (beams) and take into account the complex nature of the fixing conditions. Finiteelement implementation is more efficient for the mixed formulations of plate (beam) bending problems than for the wellknown threedimensional formulations.     

考虑剪切变形的复合材料多层板壳加权残数解

本文在文献[1]的基础上,将加权残数法用于复合材料多层板壳分析,并推导出相应的关系式。文中给出了算例,并与解析解进行了比较,结果表明,本文方法精度较高,用于复合材料多层板壳分析是有效的。     

Direct modeling of flow of FENE fluids

Direct simulations of macromolecular fluids are carried out for flows between parallel plates and in expanding and contracting channels. The macromolecules are modeled as FENE dumbbells with soft disks or Lennard-Jones dumbbell-dumbbell interactions. The results are presented in terms of profiles and contour plots of velocity, pressure, temperature, density, and flow fields. In addition the data for potential energy, shear stress, and the normal components of the stress tensor are collected. In general, an excellent agreement is found between the simulated profiles and the well-known flow structures, such as flow separation and formation of viscous eddies, indicating that micro-hydrodynamics is a viable tool in linking macroscopic phenomena with the underlying physical mechanisms. The simulations are performed in the Newtonian regime, for medium-size systems comprising up to 3888 dumbbells. This number is sufficiently large to control boundary and particle number effects. The flow is induced by gravity. The traditional stochastic (thermal) and periodic boundary conditions are employed. Also, diffusive boundary conditions, which could include a stagnant fluid layer and repulsive potential walls, are developed. The scaling problems, which are related to the application of a large external force in a microscopic system (of the size of the order 100 Å), result in extreme pressure and temperature gradients. In addition, the viscosity and thermal conductivity coefficients obtained from velocity and temperature profiles of the channel flow are presented. These results are confirmed independently from modeling of Couette flow by the SLLOD equations of motion and from the Evans algorithm for thermal conductivity.     

Different approaches of impregnation for resolution of enantiomers of atenolol,propranolol and salbutamol using Cu(II)-l-amino acid complexes for ligand exchange on commercial thin layer chromatographic plates

Atenolol and propranolol (the β-blocking agents) and salbutamol (broncho- and vasodilator) were resolved into their enantiomers by adopting different modes of loading/impregnating the Cu(II) complexes of l-proline (l-Pro), l-phenylalanine (l-Phe), l-histidine (l-His), N,N-dimethyl-l-phenylalanine (N,N-Me₂-l-Phe), and l-tryptophan (l-Trp) on commercial precoated normal phase plates. The three different approaches were (A) using the Cu(II)-l-amino acid complex as chiral mobile phase additive, (B) ascending development of plain commercial plates in the solutions of Cu complex, and (C) using a solution of Cu(II) acetate as mobile phase additive for the commercial TLC plates impregnated with ascending development of plates in the solutions of amino acid. Spots were located using iodine vapour. The results obtained for the three methods have been compared for their efficiency and the issue of involvement of the Cu(II) cation for the best performance of the three methods has been discussed with respect to the same mobile phase. The detection limit is 0.18 μg for each enantiomer.