JD树脂刻蚀及涂层的XPS研究

ＪＤ光学树脂表面刻蚀过程的ＸＰＳ研究表明，引进树脂遥ＣＯＨ，Ｃ＝Ｏ，Ｃ－ＳＯ３Ｈ，ＣＯＯＨ等基因随刻蚀温度的提高或时间的延长而增加，对其相对含量进行了计算，固化后的耐磨涂层具有ＳｉＯ２结构，ＪＤ板材的最佳刻蚀条件为２０℃，２０ｍｉｎ。     

Sorption of water vapor on cation-substituted vermiculite

Deformations of Na, Ca, and Ba vermiculites upon sorption of water vapor have been determined by a dilatometric method. Sequential stages in the hydration of interlayer exchange cations have been identified. The experimental results have been compared with data obtained in studies using adsorptive, calorimetric, and x-ray methods.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Institute of Colloid Chemistry and the Chemistry of Water, Academy of Sciences of the Ukraine, Kiev. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 34–39, January, 1992.     

苯并三氮唑及其羧酸酯衍生物对铜缓蚀机理的分子动力学模拟研究

用分子动力学(MD)方法, 模拟计算了5种铜缓蚀剂[苯并三氮唑(BTA)、苯并三氮唑-5-羧酸甲酯(MBTC)、苯并三氮唑-5-羧酸丁酯(BBTC)、苯并三氮唑-5-羧酸己酯(HBTC)、苯并三氮唑-5-羧酸辛酯(OBTC)]与Cu₂O晶体的相互作用. 结果发现, 中性条件下缓蚀剂分子与Cu₂O晶体的结合能均大于酸性条件下的数值, 但两种条件下结合能的大小排序均为OBTC＞HBTC＞BBTC＞MBTC＞BTA. 对体系各种相互作用以及对关联函数g(r)的分析表明, 体系结合能主要由库仑作用提供, Cu₂O晶体中的Cu原子与缓蚀剂分子中的N原子之间形成了配位键. 在与Cu₂O(001)晶面结合过程中, BTA及其衍生物分子发生了扭曲变形, 但形变能远小于体系的非键相互作用能.     

Enhancement of the light-scattering ability of coatings by using hollow pigments

The light-scattering properties of coatings based on monodisperse polymeric spheres of two different diameters (ca 0.5 and 1 m) were evaluated from reflectance measurements as a function of the wavelength from 400 to 700 nm. Some of these plastic pigments were hollow and it was noted that these particles gave coatings with a greater light-scattering ability than coatings based on solid particles of a similar size. It was possible to estimate the contribution of the internal pores to the scattering ability of the coating layers by saturating the layers with an oil of a refractive index similar to that of the polymeric pigment particles. A simple model accounting for the scattering provided by the internal pores of the hollow particles is suggested. The agreement between the experimental results and the prediction of the model is fair. It was noted that the light scattering coefficient of the coatings increased when the external diameter of their constituent hollow particles increased from ca 0.5 to 1 m.     

Deformation calorimetry of polyurethane block-copolymers

A thermodynamic analysis of the uniaxial stretching of polyurethanes of various compositions and mechanical histories was carried out by using deformation calorimetry. The initial small strain deformations were found to result from the volume elasticity of the hard phase. The intramolecular energy contributions of the soft blocks were estimated. The hard block contributions were shown to depend on their content and on the degree of sample stretching. The predominant role of the soft component is proved to be manifested only in softened samples with a hard block content not exceeding 30%. The thermodynamics of the softening and hysteresis phenomena were studied. The dependence of the deformation mechanism on the hard block content and mechanical history is discussed.The authors express their thanks to Dr. A. R. Korigodsky and Dr. M. P. Letunovsky for the PU samples.     

超高效合相色谱法快速检测塑料食品接触材料中13种紫外吸收剂

建立了一种同时检测塑料食品接触材料中13种紫外吸收剂的超高效合相色谱法。以甲醇为溶剂对塑料食品接触材料样品进行超声提取，经C18固相萃取柱净化，过0.22 μm有机滤膜，采用超高效合相色谱仪分析。选择ACQUTY UPC² HSS C18 SB色谱柱（150 mm×3.0 mm，1.8 μm），以超临界二氧化碳为流动相，异丙醇为改性剂进行梯度洗脱，在最优色谱条件下，13种紫外吸收剂能够在4 min内实现有效分离。结果表明，在各自线性范围内，13种紫外吸收剂的线性关系良好，标准曲线相关系数不低于0.9985，检出限（S/N=3）为0.05~0.15 mg/kg，加标回收率为86.8%~115.7%，相对标准偏差为0.73%~5.61%。该方法快速简便，准确可靠，同时大大减少了有机溶剂的消耗，可用于塑料食品接触材料中13种紫外吸收剂的快速检测。     

Electron density distribution in potassium bis -(carbonato)cuprate(II)

The electron density distribution in potassiumbis-(carbonato)cuprate(II) has been analyzed using x-ray diffraction data from an earlier structure determination. While the copper-ligand geometry is close to square planar the deformation density near the metal is strongly asymmetric. There are local maxima near the copper atom along the line of the Cu-K vectors. These resemble features found in corresponding regions in normal length metal-metal bonds. The observation is consistent with the long range nature of the Coulomb potential associated with the potassium ion.     

Plastic deformation and performance of engineering polymer materials

The plastic deformation mechanism operating in polymer glasses is analyzed. The whole process consists of two main stages: nucleation of special shear defects, called PSTs (plastic shear transformations), and their disappearance. The important feature of plastic deformation of glasses is the storage of a large amount of internal energy ΔU_def upon straining. Such energy storage is the critical issue for mechanical performance of polymeric material: if the amount of stored energy is high, the appearance of macroscopic failure is very probable while glassy materials collecting a small amount of stored deformation energy are quite ductile. It is proposed that the rate of disappearance of PSTs is a key factor in dissipation of stored deformation energy. A parameter describing the dissipation ability of material upon deformation is introduced.     

RESEARCH ANNOUNCEMENTS ON “DPK: DEEP NEURAL NETWORK APPROXIMATION OF THE FIRST PIOLA-KIRCHHOFF STRESS”

1 Introduction and Main Results Consider the first Piola-Kirchhoff stress P defined as[1]P(F)=?W(F)/?F,(1.1)where F and W refer to the deformation tensor and strain energy density.Due to the principle of material frame-indifference and the material symmetry,two important constraints should be satisfied by these relations[1].     

Adsorption studies of organosubstituted laminated silicates

The hysteresis of sorptive deformation of sorbents has been studied for the first time. Based on the results obtained, it is assumed that the deformation of sorbents could be the universal reason for the sorptive hysteresis.For Part 1, see Ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1477–1479, August, 1995.