STM针尖诱导构筑-置换两步法制备Pt表面纳米结构

STM“Jump-to-contact”针尖诱导表面纳米构筑是目前水溶液中具有最高分辨率的一种表面纳米构筑技术.然而,一些金属因其具有较高的内聚能而难以发生针尖原子向表面的转移,限制了该技术的广泛应用.本文建立了以STM构筑-置换两步法获得不能直接利用“Jump-to-contact”原理进行构筑的金属表面纳米团簇阵列,利用STM针尖“Jump-to-contact”诱导在Au(111)表面构筑Cu纳米团簇阵列,然后通过Pt-Cu置换的方法,制备出Au(111)表面的Pt纳米团簇阵列.     

Barrier Dispersion-Based Coatings Containing Natural and Paraffin Waxes

Petroleum, synthetic, and natural waxes have been used as hydrophobic bases for dispersions intended for use as barrier coatings for packaging paper. Oil-in-water dispersions with alkaline pH were prepared by a two-step homogenization procedure containing paraffin wax, with various characteristics, the Fischer–Tropsch synthesis product or beeswax. The size of the dispersed particles determined by dynamic light scattering depended on the type of hydrophobic base used and was in the range of 350–440 nm. The ability of dispersion particles in aggregation driven by electrostatic attraction, evaluated by Zeta potential analysis by electrophoretic light scattering, was from −26 to −50 mV. Static multiply light scattering was used for 30 days of stability assessment and helped to select the dispersion with a Sarawax SX70 wax base as the most stable. Dispersions were further used for coating the backing of kraft paper by the Meyer rod method. Coated paper with an applied coating of 6 g/m² had very good hydrophobic properties (Cobb60 < 4 g/m²), sufficient strength properties, and air permeation, which enabled its application as a packaging material. The dispersions based on Sarawax SX70 wax were evaluated as the best coating for Mondi ProVantage Kraftliner 125 g/m² backing paper. Good hydrophobic properties and strength properties indicate the possibility of using the SX70-based wax dispersion coating as a replacement for PFAS coatings in some applications.     

Flow physics of normal and abnormal bioprosthetic aortic valves

Flow physics of transvalvular flows in the aorta with bioprosthetic valves are investigated using computational modelling. For the efficient simulations of flow-structure-interaction in transvalvular flows, a simplified, reduced degree of freedom valve model is employed with a sharp interface immersed boundary based incompressible flow solver. Simulations are performed for normal as well as abnormal valves with reduced leaflet motion that models the effect of early leaflet thrombosis. The structure of the aortic jet and the hemodynamic stresses on the aortic wall are analysed to understand the hemodynamic impacts and possible long-term clinical implications of sub-clinical, reduced leaflet motion. The simulation results have shown that the reduced leaflet motion tilts the direction of aortic jet and generates stronger flow separation and re-attachment on the aortic wall downstream from the reduced motion leaflets. The modified flow pattern increases the wall pressure fluctuation and average wall shear stress on the downstream aortic wall, and results in the asymmetric oscillatory shear index distributions, which may have long-term clinical implications such as aortic wall damage and remodelling.     

Crystal Structure of Crotin Ⅱ at 2.5  Resolution

1INTRODUCTIONTheplanttoxin,CrotinIisoneoftheribosomeinactivatingproteins(RIPs)[l3.AccordingtothemolecularmechanismofactiontheRIPscanbedividedintotwokinds[2:.OnebelongstoRNAN-glycosidasewhichisclassifiedastwotypes.TypeIconsistsofasinglepolypeptidechain,forexample,trichosanthinandsaporin-Typellconsistsoftwochains,suchasricinandabrin'ThiskindofRIPshydrolysesasingleN-glycosidicbondbetweenanadenineandriboseatspecificnu-cleotide(A4324)of28SrRNAintheribosomes[3i.ThesecondkindofRIPsbel…     

气固相同晶取代法制备Ti-ZSM-5及其催化性能的研究

以Ｂ－ＺＳＭ－５沸石为母体,经过盐酸洗涤脱硼后,采用气固相同晶取代法制备了Ｔｉ－ＺＳＭ－５沸石．考察了制备条件如反应温度、反应时间和载气流速等对产品沸石中钛物种的配位状态和含量的影响．发现进入Ｔｉ－ＺＳＭ－５骨架中的钛含量存在一个极限值．ＦＴ－ＩＲ、ＵＶ－Ｖｉｓ表征技术和丙烯环氧化反应结果表明：不同气固相反应条件下制备的Ｔｉ－ＺＳＭ－５沸石具有不同的物化性质．骨架钛含量高而非骨架钛含量低的钛沸石具有较高的丙烯环氧化催化活性．     

三维多孔核壳结构PdNi@Au催化剂的制备及对甲酸的电催化氧化

以K₂PdCl₄/K₂Ni(CN)₄为前驱体制备了具有凝胶特性的氰胶(Cyanogels), 利用硼氢化钠还原氰胶得到三维多孔珊瑚状PdNi合金前驱体, 在此基础上通过原位Galvanic置换反应, 制备得到内核为PdNi合金、 表面具有不同厚度Au层的三维多孔PdNi@Au催化剂. X射线衍射(XRD)分析和透射电子显微镜(TEM)观测结果显示, 该三维网状结构由粒径约7 nm的纳米颗粒相互连接形成; 能量分散光谱(EDX)线性扫描和元素分布(Mapping)分析显示该催化剂具有典型的核壳结构. 电化学测试结果表明, 表面Au层的厚度影响PdNi@Au催化剂的性能, 当Au的含量(摩尔分数)为5.6%时, 催化剂显示出对甲酸最佳的电催化活性, 对甲酸电催化氧化的峰电流密度达到商业化铂黑催化剂的7.2倍.     

Electrocatalytic activity of porous nanostructured Fe/Pt-Fe electrode for methanol electrooxidation in alkaline media

An electrochemical approach to fabricate a nanostructured Fe/Pt-Fe catalyst through electrodepo-sition followed by galvanic replacement is presented. An Fe/Pt-Fe nanostructured electrode was prepared by deposition of Fe-Zn onto a Fe electrode surface, followed by replacement of the Zn by Pt at open-circuit potential in a Pt-containing alkaline solution. Scanning electron microscopy and energy-dispersive X-ray techniques reveal that the Fe/Pt-Fe electrode is porous and contains Pt. The electrocatalytic activity of the Fe/Pt-Fe electrode for oxidation of methanol was examined by cyclic voltammetry and chronoamperometry. The electrooxidation current on the Fe/Pt-Fe catalyst is much higher than that on flat Pt and smooth Fe catalysts. The onset potential and peak potential on the Fe/Pt-Fe catalyst are more negative than those on flat Pt and smooth Fe electrodes for methanol electrooxidation. All results show that this nanostructured Fe/Pt-Fe electrode is very attractive for integrated fuel cell applications in alkaline media.     

单层分散型Pd/Ni双金属催化剂的制备及其催化加氢性能

通过置换反应制备了Pd/Ni双金属催化剂,利用X射线衍射、CO化学吸附和吸附H2的程序升温脱附对其进行了表征,并测定了该催化剂对环己烯、苯乙烯和丙酮气相加氢反应的催化性能.结果发现,在这种催化剂中Pd原子单层分散在金属Ni的表面,因而该催化剂表现出比浸渍法制备的相同Pd含量的Pd/Ni-im和Pd/-γAl2O3催化剂更高的催化加氢活性.     

双金属(Sn/Ni)掺杂多孔硅微球的液相合成与电化学储锂性能

使用廉价的硅铝合金前驱体,通过简单的化学沉积方法制备了新型双金属(Sn/Ni)掺杂多孔硅微球(pSi@SnNi)。pSi@SnNi复合材料的三维多孔结构可以缓冲硅在锂化过程中的巨大体积膨胀,增加储锂活性位点。双金属(Sn/Ni)的掺杂可以提高硅的电子导电性,改进pSi的结构稳定性。由于其独特的组成和微观结构,具有适当Sn/Ni含量的pSi@SnNi复合材料显示了较大的可逆储锂容量(0.1 A·g^-1下为2 651.7 mAh·g^-1)、较高的电化学循环稳定性(1 A·g^-1下400次循环后为1 139 mAh·g^-1)和优异的倍率性能(2.5 A·g^-1下为1 235.8 mAh·g^-1)。     

Ag3PO4的可见光光催化性能及机理分析

采用沉淀置换法制备了可见光光催化剂Ag3PO4,利用XRD、UV-Vis及XPS等对其进行了结构特性分析,以水中微污染有机物的降解评价了Ag3PO4的光催化活性,并通过活性物种及能带结构的分析对催化剂的光催化机理进行了推测。结果表明,Ag3PO4的带隙能约为1.9 eV、催化剂表面存在的Ag+可捕获光生e-、催化剂的价带电位较低,这有利于Ag3PO4在可见光照射下产生的e--h+的分离及活性物种.OH的形成。经60 min可见光光催化反应,15 mg.L-1的甲基橙和腐殖酸的降解率分别达97%和82%,比同等条件下TiO2-P25的降解率还高40%和25%,光催化剂Ag3PO4的用量为0.6 g.L-1。