Role of solvent in the compatibility of a vinylchloride–vinylacetate–maleic acid terpolymer and nitrocellulose blends

The compatibility of cast films of a vinylchloride–vinylacetate–maleic acid terpolymer (VMCH) and nitrocellulose (NC) blends is influenced by solvents. Transparent films of VMCH/NC blends are obtained when cast from solvents such as tetrahydrofuran or cyclohexanone, whereas hazy films are obtained when cast from solvents such as acetone or ethylacetate. Visible spectroscopy and phase morphology were used to analyse the compatibility–incompatibility of the blend. Differential scanning calorimetry (DSC) studies demonstrate that the transparent film is compatible, but the hazy film is incompatible. Fourier transform infra-red (FTIR) studies establish that a greater interaction is observed between the polymer pair in case of the compatible blend than in the case of the incompatible blend. A solvent dependency of blend compatibility is reflected in this study. The conformational state of the polymers in solution, which is responsible for the compatibility phenomena, may depend on the donor number and/or Taft-β value of the solvent. The greater the donor number and/or the Taft-β value, the higher may be the level of interaction between the solvent and the polymer molecules, which in turn may give a compatible blend after removal of the solvent.     

C–H· π Interaction and N·H–O Hydrogen Bonding in the Chair-like p-tert-Butylcalix[8]arene Complex Including Four Pyridine Molecules

Crystal structure analysis shows that the p-tert-butylcalix[8]arene host and its four pyridine guests sit around an inversion center in the P2₁/c crystal lattice. The monoclinic cell parameters and its volume are: a = 19.617(4), b = 9.912(2), c = 25.178(5) , = 101.03(3)°, V =4805.27(17) ³. For Z = 2 and Mw = 1614.18, the calculated density Dcalc = 1.116 g/cm³. A host calixarene molecule includes four pyridine guests in two different ways: by hydrogen bonding and by possible C–H· interaction between the molecules. The hydrogen bonding drives the host macrocycle into a chair-like conformation.     

Accurate electrical and spectroscopic properties ofX 1Σ+ BeO from coupled-cluster methods

Summary This paper reports a series of coupled-cluster (CC) calculations through CCSDT on the theoretically challenging ground state of the BeO molecule. Along with CC methods, quadratic configuration interaction (QCI) approximations to CC theory have been used (QCISD and QCISD(T)), which show several dramatic failings. Equilibrium electrical properties (, _xx , and _zz ) and basic spectroscopic properties (r _e, _e,D _e, and infrared intensity (I)) have been computed. Basis set and electron correlation effects are analyzed in order to arrive at accurate values of the dipole moment and polarizability, which are not known experimentally. For the dipole moment, we obtain a value of 6.25 D, with an uncertainty of about 0.1 D. For _xx and _zz , we suggest respective values of 32 and 36 atomic units (a.u.) and error bars of about 1 and 2 a.u. With extended basis sets, the spectroscopic propertiesr _e, _e, andD _e are reproduced to high accuracy, which is the first time this has been achieved for this species byab initio methods. At the highest calculation levels,I is predicted to be very small. AlthoughI has not been measured, some support for this prediction comes from a recent infrared study of BeO-rare gas complexes. The QCI methods are shown to be much more sensitive to basis set, and even with large basis sets yield values of _zz andI which differ from CC results by an order of magnitude and three orders of magnitude, respectively. These differences doubtless arise from the importance of single excitations (T ₁) for this molecule, as several terms involvingT ₁ are neglected in the QCISD approximation compared with CCSD. We also report CC calculations with Brueckner orbitals, which yield results similar to those obtained with restricted Hartree-Fock orbitals.     

The formation of cation-ligand complexes of tributylammonium cation with diethyl carbonate,ethylene carbonate,propylene carbonate, 4-butyrolactone,ethyl acetate,and cyclopentanone ino-dichlorobenzene at 25°C

The effects of adding millimolar quantities of a series of compounds containing the carbonyl function on the conductances of solutions (0.2 mM) of tri-n-butylammonium picrate ino-dichlorobenzene solvent at 25°C have been measured. Values of the complex formation constants K ₁ ⁺ for 1:1 cation-ligand complexes are derived from these data. The corresponding values of –G ₁ ⁰ at 25°C are (in kcal-mole ^–1 ): 4-butyrolactone, 4.29; propylene carbonate, 3.87; ethylene carbonate, 3.59; cyclopentanone, 3.42; ethyl acetate, 2.84; and diethyl carbonate, 2.78. These results together with earlier results from this laboratory are discussed in terms of the effects of structure on cation-ligand affinity.     

Visual recognition of melamine in milk via selective metallo-hydrogel formation

A novel protocol allowing convenient and highly selective visual recognition of melamine in raw milk via selective metallo-hydrogel formation at a concentration as low as 10 ppm without any tedious pretreatment has been developed.     

含dppm桥的双核过渡金属配合物中金属─金属间的相互作用

应用ＥＨＭＯ法研究了一系列含ｄｐｐｍ双二苯基膦甲烷桥的双核过渡金属配合物［ＰｄＢｒ（ｄｐｐｍ）］_２，Ｍ_２Ｃｌ_２（μ－ＣＯ）（ｄｐｐｍ）_２（Ｍ＝Ｐｄ，Ｒｈ），［ＲｈＣｌ（ＣＯ）（ｄｐｐｍ）］_２，Ｍ_２－（μ－Ｃｌ）_２Ｃｌ_４（ｄｐｐｍ）_２（Ｍ＝Ｎｂ、Ｔａ、Ｒｅ、Ｒｕ）的电子结构。根据配合物的成键特征，对其金属－金属的相互作用进行了分析。计算结果可以作为解释这类配合物的某些物理化学性质的理论依据。     

COMPUTER SIMULATION OF A SINGLE POLYMER CHAIN IN DIFFERENT SOLVENTS

In the present paper, the behavior of a single polymer chain under various solvent conditions was modeled by self-avoiding walks (SAW) with nearest neighbors attraction Δε on a simple cubic lattice. Determination of the θ-condition wasbased on the numerical results of the mean square radius of gyration and end-to-end distance. It was found that at the θtemperatue Δε/kT equals -0.27. The exponents a in the Mark-Houwink equation with different interaction parameters areconsistent with the results of experiments: under θ-condition, a = 0.5, and for a good solvent α= 0.74-0.84, respectively.     

N-(2-羧基苯)-N’-(3-氨丙基)草酰胺桥联异双核配合物的合成、电化学性质和磁性

合成了 4种不对称草酰胺桥联异双核配合物 [Cu( oxca) M( phen) 2 ]Cl O4· 2 H2 O[oxca表示 N -( 2 -羧基苯 ) -N -( 3-氨丙基 )草酰胺三价阴离子 ,phen代表邻菲啉 ,M=Mn、Co、Ni、Zn].用元素分析、红外光谱、电子光谱、热分析及室温磁矩等对所合成配合物进行了表征 .在 DMSO溶剂中采用循环伏安法研究了配合物的电化学性质 .在 4～ 30 0 K范围测量了 Cu( ) -Mn( )和 Cu( ) -Ni( )的变温磁化率 ,经拟合分别得磁参数 J=-1 0 .5 6 cm- 1 和 J=-1 7.0 8cm- 1 ,表明在异双核配合物中金属离子间有较弱的反铁磁性自旋交换作用 .     

金属－助剂相互作用对SiO_2载铑催化剂化学吸附的影响──Ⅱ．Rh－V／SiO_2催化剂

由ＲｈＣｌ_３·ｘＨ_２Ｏ制备了不同Ｒｈ含量的Ｒｈ／ＳｉＯ_２和Ｒｈ－Ｖ／ＳｉＯ_２催化剂，采用化学吸附和原位ＴＰＤ－ＩＲ方法考察钒助剂对Ｒｈ／ＳｉＯ_２催化剂在常温和高温的Ｈ_２和ＣＯ化学吸附的影响。结果再次表明：１）不同Ｒｈ中心对Ｈ_２和ＣＯ的化学吸附性能不同，钒助剂对不同Ｒｈ中心的Ｈ_２和ＣＯ吸附的影响也不同。Ｈ_２主要吸附在Ｒｈ~Ⅱ和Ｒｈ~Ⅲ中心上，而在Ｒｈ~Ⅰ中心上的吸附弱。２）Ｒｈ－钒助剂的强相互作用主要是Ｒｈ~Ⅱ和Ｒｈ~Ⅲ与钒助剂之间的相互作用，Ｈ_２吸附受到比ＣＯ吸附更强烈的抑制。钒助剂对Ｒｈ／ＳｉＯ_２的Ｈ_２和ＣＯ吸附性能的影响可用覆盖模型解释。     

用计算模拟方法研究Al_3P_4O_(16)~(3-)计量比的二维层状磷酸铝中的有机胺模板能力

将快速 Monte Carlo方法与分子动力学方法相结合 ,研究了不同种类有机分子在 Al3P4 O3- 1 6 计量比的二维层状磷酸铝形成中的模板能力 .依据主 -客体之间非键相互作用能 (包括范德华能、氢键能和库仑能 ) ,可合理地解释已知实验现象 ,并能有效地预测出适于形成某一特定无机层结构的有机胺模板剂 .通过选择理论预测的有机胺分子作为模板剂 ,成功地合成了二维层状磷酸铝化合物 Al3P4 O1 6 · 1 .5 H3NC6 H1 0 NH3.