ATR-FTIR study of Bacillus sp. and Escherichia coli settlements on the bare and Al2O3 coated ZnSe internal reflection element

FTIR-ATR has been used for understanding the interaction between bacteria and surfaces in the adsorption progress.     

Mg改性对Co/γ-Al2O3-TiO2催化燃烧丙烷性能影响

采用分步浸渍法制备了系列Mg改性的Co/γ-Al_2O_3-TiO_2催化剂,通过X射线衍射(XRD)、紫外可见漫反射光谱(DR-UV-vis)、N_2吸附-脱附(BET)、X射线光电子能谱(XPS)和H_2程序升温还原(H_2-TPR)等技术对催化剂进行表征,并考察了其对丙烷燃烧的催化性能。结果表明,Co在原始γ-Al_2O_3-TiO_2载体和Mg改性MgO/γ-Al_2O_3-TiO_2载体上均以Co_3O_4的形式存在;Mg掺入后与Al_2O_3作用形成MgAl_2O_4尖晶石,改善了载体的织构性质,提升了Co_3O_4在催化剂载体表面的暴露数量和分散程度。此外,MgAl_2O_4与Co_3O_4相互作用提升了Co_3O_4颗粒表面Co~(3+)/Co~(2+)和O_(ads)/O_(latt)的比例,并削弱了Co-O键键能,从而提升了其对丙烷的催化燃烧活性。当Mg负载量为15%(质量分数)时,在Co/MgO(15%)/γ-Al_2O_3-TiO_2催化剂上进行丙烷燃烧,丙烷90%转化率的温度比无Mg掺杂的Co/γ-Al_2O_3-TiO_2催化剂的降低了45℃,并且连续反应40 h其活性保持稳定。     

Internally contracted multiconfiguration-reference configuration interaction calculations for excited states

Summary The calculation of electronically excited states with the internally contracted multiconfiguration-reference configuration interaction (CMRCI) method is discussed. A straightforward method, in which contracted functions for all states are included in the basis, is shown to be very accurate and stable even in cases of narrow avoided crossings. However, the expense strongly increases with the number of states. A new method is proposed, which employs different contracted basis sets for each state, and in which eigensolutions of the Hamiltonian are found using an approximate projection operator technique. The computational effort for this method scales only linearly with the number of states. The two methods are compared for various applications.Dedicated in honor of Prof. Klaus Ruedenberg     

A hybrid approach combining energy density analysis with the interaction energy decomposition method

We propose a new analysis technique for characterizing molecular interactions that combines an energy decomposition scheme, such as the Kitaura-Morokuma decomposition method, with energy density analysis, which partitions the total energy of the system into atomic contributions. The combined scheme, termed Interaction-EDA, enables us to estimate the local contribution of interaction energy components, such as electrostatic, exchange, polarization, and charge transfer. The evaluation of the local interaction energy is rather important in large systems. For a numerical assessment, the Interaction-EDA method is applied to the process of CO adsorption on Si(100) - (2 x 1) surface.     

Dielectric studies of binary mixtures of n -propyl alcohol and ethylenediamine

Dielectric constant (ε’) and dielectric loss (ε") of n-propyl alcohol (PA), ethylenediamine (EDA) and their binary mixtures, for different mole fractions of ethylenediamine have been experimentally measured at 11.15 GHz microwave frequency. Values of density (ρ), viscosity (η) and square refractive index (n _D ² ) of binary mixtures as well as those of pure liquids are reported. Excess square refractive index, viscosity and activation energy of viscous flow have also been estimated. These parameters have been used to explain the formation of complexes in the system.     

Influence of SMA content on the electro-optical properties of polymer-dispersed liquid crystal prepared by monodisperse poly(MMA-co-SMA)/LC microcapsules

Monodisperse poly(methyl methacrylate) (PMMA) particles containing various concentrations of stearyl methacrylate (SMA) were prepared, and a liquid crystal (LC) was swollen into the particles using a solute co-diffusion method (SCM). Phase separation behaviors between the polymer and LC were monitored by utilizing an optical and a polarized microscope (OM/POM). The monodisperse LC microcapsules were then applied to a polymer-dispersed liquid crystal (PDLC), and the electro-optical properties were investigated. As a result, the threshold and driving voltages were improved when the SMA content increased. The long alkyl chains of SMA in the capsules should exist at the interface of the LC and polymer resulting in an enhancement of phase separation between the polymer and LC, which largely influences the electro-optical properties of PDLC.     

Microgels and ionic associations in solutions of cellulose diacetate

Solutions of cellulose diacetate (CDA) from two sources (cotton linters and wood pulp Floranier) were analysed in various solvents by size exclusion chromatography (SEC). Without special precautions, the SEC chromatograms presented three peaks — or prehumps — before the main polymer peak. The first prehump which could be eliminated by ultracentrifugation corresponded to microgels whose sugar composition was determined. These microgels were also investigated by electron microscopy, X-ray and electron diffraction analysis. They corresponded mainly to cellulose triacetate (CTA-II) in the case of CDA from cotton linters and a mixture of CTA-II and xylan diacetate (XDA) in the case of CDA from the wood pulp Floranier. The second and third prehumps could be attributed to ionic effects corresponding to the association of remaining sulfate groups on the CDA molecules with residual calcium. It was found that these ionic effects could be eliminated by the addition of LiBr or LiCl to the elution solvents. This led to chromatograms devoid of prehumps.Presented in part at the Cellulose '91 meeting in New Orleans.     

Dansyl-Modified γ-Cyclodextrin as a fluorescent sensor for molecular recognition

The crystal structure of thiamine iodide sesquihydrate has been determined by X-ray diffraction methods as a host-guest model for coenzyme-substrate interactions. The asymmetric unit contains two chemical units. Both the thiamine molecules A and B, which are crystallographically independent, assume the usualF conformation and have a disordered hydroxyethyl side chain. An iodide anion (or a water molecule) bridges the pyrimidine and thiazolium rings of molecule A (or B) by forming a hydrogen bond with the amino group and an electrostatic contact with the thiazolium ring to stabilize the molecular conformation. In the crystal the thiamine molecules self-associate to form a pipe-like polymeric structure, in which four thiamine hosts surround an iodide guest and hold it through C(2)-H...I hydrogen bonds and thiazolium...I electrostatic interactions. Crystal data: C₁₂H₁₇N₄OS⁺·I^– · 1.5 H₂O, monoclinic,P2₁/c, a=12.585(2), b=25.303(5), c=12.030(2) Å, =115.15(1)°,V=3468(1) ų,Z=8,D _c=1.606 g cm^–3,R=0.045 for 3328 observed reflections. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP. 82156 (13 pages).     

Synthesis of new titanatranes containing organic substituents in the atrane fragment

Titanatrane CpTi(OCH(CH₃)CH₂)₃N (3) was prepared by the reaction of CpTiCl₃ with N(CH₂CH(CH₃)OH)₃ in the presence of triethylamine. The reaction of CpTi(OMe)₃ (8) with N(CH₂CH₂OH)₂(CH₂CHPhOH), erythro-N(CH₂CH₂OH)₂(CHPhCHPhOH), and N(CH₂CH₂OH)₂(CH₂CPh₂OH) gave cyclopentadienyltitanatranes 12–14. Compound 8 reacts with threo-N(CH₂CH₂OH)₂(CHPhCHPhOH) to give a mixture of threo-CpTi(OCH₂CH₂)₂(OCHPhCHPh)N and threo-MeOTi(OCH₂CH₂)₂(OCHPhCHPh)N. Slow hydrolysis of the latter product gave threo-[Ti₃O(OMe){(OCH₂CH₂)₂₋ (OCHPhCHPh)N} ₃]₂, which was studied by X-ray diffraction analysis. The crystal structures of 3 and 12 were also determined by X-ray diffraction analysis. The titanium coordination polyhedron in these complexes is a distorted trigonal bipyramid in which the equatorial positions are occupied by three oxygen atoms and the axial positions contain the N atom and the Cp group. The titanium—nitrogen distances (2.313(2), 2.291(2) Å in two independent molecules of 3 and 2.271(2) Å in compound 12) confirm the presence of Ti←N transannular interaction. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2736–2744, December, 2005.     

Model dipeptides incorporating the trans cyclohexane analogues of phenylalanine: further evidence of the relationship between side-chain orientation and β-turn type

In order to study the influence of the side-chain orientation on the peptide backbone conformation we have synthesised the model dipeptides t-BuCO-l-Pro-(1S,2R)-c₆Phe-NHMe and t-BuCO-l-Pro-(1R,2S)-c₆Phe-NHMe, incorporating each enantiomer of the trans cyclohexane analogue of phenylalanine (trans-1-amino-2-phenylcyclohexanecarboxylic acid). The orientation of the aromatic side-chain determines the β-turn type accommodated by these peptides to the point that the (1S,2R)-c₆Phe derivative retains the type I β-turn in the crystalline state, in contrast to the behaviour exhibited by the natural counterpart t-BuCO-l-Pro-l-Phe-NHMe.