Temperature Effects on Attenuation Due to Rain for Millimeter and Centimeter Waves

Radio wave operating in millimetrewave and microwave frequency bands are adversely affected due to rain. Particularly the attenuation is of immense significance for sensitive remote measurements by satellites using frequencies greater than 10 GHz. Maintenance of an uninterrupted communication link requires a precise knowledge of the attenuation effect due to rain for commissioning right kind of transmitting sources for various purposes required in present day situation. Precise measurement of attenuation at various frequencies will enable us to choose the right frequency, polarization, incident angle and power of the source for different purposes. In this paper we have compared the results of earlier works using aR^b Olsen et al, (1) and the formulation by Moupfouma, (2) on the basis of theoretical analysis for explaining the observed results. Effect of temperature, considered in detail in this communication, has contributed the necessary correction factor of the rain attenuation for explaining the observed results. Theoretical analyses to measure the attenuation of the propagating wave due to temperature variation in the rain path have been presented. Correction factor due to temperature profile (temperature from the ground to the rain height within which the radio wave traces its path) has been incorporated in two models by using the concept of dipole energy changes. The effect of this temperature is noted to be quite significant and incorporates an error to the extent of 7–8%.     

动态随机最短路径算法研究

静态最短路径问题已经得到很好解决, 然而现实中的网络大多具有动态性和随机性. 网络弧和节点的状态及耗费不仅具有不确定性且相互关联, 弧和节点的耗费都服从一定的概率分布, 因此把最短路径问题看作是一个动态随机优化问题更具有一般性. 文中分析了网络弧和节点的动态随机特性及其相互关系, 定义了动态随机最短路径; 给出了动态随机最短路径优化数学模型, 提出了一种动态随机最短路径遗传算法; 针对网络的拓扑特性设计了高效合理的遗传算子. 实验结果表明, 文中提出的模型和算法能有效地解决动态随机最短路径问题, 可以运用到交通、通信等网络的网络流随机优化问题中.     

非线性耗散对亚稳态系统量子衰变速率的影响

发展了一种快速傅里叶变换路径积分方法，研究非线性耗散系统的量子衰变速率，得到了Bounce轨道的作用量S_B，即衰变速率的指数因子.在系统与环境存在非线性耦合f(x)=tanh［λ(x-x_b)］的情形下，发现其对衰变速率具有抑制作用.指数因子随温度T的关系不再满足S_B=a［1-b(T/T_c)²］法则；与通常的线性耗散情形相比，跨越温度T_c回升，即系统更早地进入穿透区域. 关键词： 量子衰变 非线性耦合 路径积分 快速傅里叶变换     

变厚度多边形蜂窝结构的超声C扫描检测方法

为了解决变厚度多边形蜂窝结构超声波检测难和检测效率低的问题,采用了灵敏度补偿和多边形扫查路径规划相结合的超声C扫描方法进行检测。在扫查检测过程中,一是根据构件厚度变化进行灵敏度补偿,消除因厚度变化而引起的超声信号衰减对检测结果的影响;二是根据构件几何形状对此类构件进行多边形扫查路径规划,减少探头的空扫描范围,提高检测效率。试验结果表明:该检测方法能准确、高效地检出变厚度多边形蜂窝结构中的缺陷。     

基于无信息变量消除法与岭极限学习机的新型变量选择方法：以CO气体浓度反演为例

变量选择是光谱分析领域一个重要的组成部分。为了克服传统区间选择法的缺点与不足,基于无信息变量消除法和岭极限学习机提出一种新型的变量选择与评价方法。首先,利用无信息变量消除法剔除整个光谱区间中无信息的波长点;其次,为了解决传统建模方法(偏最小二乘法、BP神经网络等)存在的共线性问题,采用岭极限学习机方法建立回归模型;最后,最佳的特征光谱波长点组合利用特征选择路径图和稀疏度-误差折中曲线进行确定。CO气体的浓度反演实验结果表明：(1)利用无信息变量消除法可以有效筛选出最能表征CO气体透过光谱的特征波长点;(2)岭极限学习机方法具有快速建模、避免共线性和高精度等优点(CO气体浓度反演模型的决定系数可达0.995);(3)特征选择路径图和稀疏度-误差折中曲线可以直观地帮助用户寻找出最佳的特征波长点组合。     

金属纳米颗粒的热导率

本文使用统计模拟方法对金属纳米颗粒的电子平均自由程进行了计算,并考察了纳米颗粒的晶格比热和声子平均群速度,最后应用动力学理论对纳米颗粒的电子热导率和声子热导率分别进行了求解.研究结果表明:具有相同特征尺寸的方形、球形纳米颗粒的无量纲电子(或声子)平均自由程比较接近.金属纳米颗粒的电子热导率远大于声子热导率;电子、声子热导率随着直径减小呈现降低趋势,而电子热导率的颗粒尺度依赖性比声子热导率更为明显;随着颗粒直径进一步减小,声子热导率与电子热导率趋于同一数量级.当纳米颗粒特征尺寸大于4倍块材电子(或声子)平均自由程,其电子(或声子)热导率的颗粒尺度依赖性将减弱.     

面向传递路径分析方法研究的试验系统设计*

在传递路径分析理论研究中,经典传递路径分析要求在传递函数测量时拆卸激励源,为了减少工作量,设计一套面向传递路径分析方法研究的实验系统。以简化发动机模型作为激励源,真实汽车发动机悬置作为传递路径,简化车身内的响应为目标响应,建立一套完整的传递路径分析模型。在保留主要激励特征情况下简化发动机机体结构,将NI Compact RIO作为控制核心,激振器作为激励施加装置,以缸压信号和机体振动信号为激励信号对机体加载,实现发动机激励特征的模拟。最终验证该实验系统可模拟出发动机的结构噪声,采集信号中阶次成分明显,主要噪声频段基本吻合,可从阶次信号中提取对应转速信息。整个实验系统结构简单,可作为载体用于传递路径分析方法的研究。     

Real‐Time Monitoring of Transport of Chlorinated Hydrocarbons from Industrial Areas Using Open‐Path FTIR Spectrometry with COL1SB

Abstract

Open‐path Fourier transform infrared (FTIR) spectrometry was used to continuously monitor 11 chlorinated hydrocarbon species in the region connecting two different industrial complexes for 24 hr. The single‐beam spectra obtained from open‐path FTIR were analyzed by newly developed software named COL1SB, which generates site‐specific background spectra as well as path‐averaged water vapor concentrations in addition to performing regression analyses. The path‐averaged water vapor concentrations calculated by the COL1SB agreed very well with those measured by a thermo‐hygrometer. In addition, site‐specific background spectra were generated by accounting for chemical absorption of 50 chemical species. The accurate estimation of path‐averaged water vapor concentrations, as well as the usage of site‐specific background spectra, enables chlorinated hydrocarbons to be measured by open‐path FTIR spectrometry at the ppb level. Among 11 chlorinated hydrocarbons considered here, trichlorofluoromethane, carbon tetrachloride, trichloroethylene, and tetrachloroethylene were identified as major chlorinated hydrocarbons having concentrations above 1 ppb. Wind affected the temporal variations of these chlorinated hydrocarbons, indicating the importance of local transport. However, the effect of wind differed from one species to another because of different source characteristics.     

开放光程扬尘颗粒物浓度测量方法及系统

利用单波长激光通过扬尘空间发生散射消光衰减的特性,设计了开放光程的颗粒物浓度检测方法及系统。该方法利用双峰正态分布模型模拟颗粒物粒径分布,实时计算一定空间范围内的扬尘颗粒物浓度,具有响应速度快、测量动态范围宽的优点,适合浓度高、变化快、空间范围大的扬尘颗粒物浓度测量。通过水溶胶模拟实验与烟尘实验验证了该方法的可行性。实验数据表明,系统量程可达0~400mg/m3,分辨率为0.05mg/m3,响应时间小于1s。