Multicriteria decision making under uncertainty

Formalization for problems of multicriteria decision making under uncertainty is constructed in terms of guaranteed and weak estimates. A relevant definition of the vector maximinimax value is given. Parameterization and approximation of maximum, minimax, and maximinimax values based on the inverse logical convolution are suggested. An application for multicommodity networks is considered. Received: December 13, 2000 / Accepted: August 21, 2001?Published online May 8, 2002     

Chemical reaction dynamics of PeCB and TCDD decomposition: A tight‐binding quantum chemical molecular dynamics study with first‐principles parameterization

The decomposition reaction dynamics of 2,3,4,4′,5‐penta‐chlorinated biphenyl (2,3,4,4′,5‐PeCB), 3,3′,4,4′,5‐penta‐chlorinated biphenyl (3,3′,4,4′,5‐PeCB), and 2,3,7,8‐tetra‐chlorinated dibenzo‐p‐dioxin (2,3,7,8‐TCDD) was clarified for the first time at atomic and electronic levels, using our novel tight‐binding quantum chemical molecular dynamics method with first‐principles parameterization. The calculation speed of our new method is over 5000 times faster than that of the conventional first‐principles molecular dynamics method. We confirmed that the structure, energy, and electronic states of the above molecules calculated by our new method are quantitatively consistent with those by first‐principles calculations. After the confirmation of our methodology, we investigated the decomposition reaction dynamics of the above molecules and the calculated dynamic behaviors indicate that the oxidation of the 2,3,4,4′,5‐PeCB, 3,3′,4,4′,5‐PeCB, and 2,3,7,8‐TCDD proceeds through an epoxide intermediate, which is in good agreement with the previous experimental reports and consistent with our static density functional theory calculations. These results proved that our new tight‐binding quantum chemical molecular dynamics method with first‐principles parameterization is an effective tool to clarify the chemical reaction dynamics at reaction temperatures. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Rapid parameterization of small molecules using the force field toolkit

The inability to rapidly generate accurate and robust parameters for novel chemical matter continues to severely limit the application of molecular dynamics simulations to many biological systems of interest, especially in fields such as drug discovery. Although the release of generalized versions of common classical force fields, for example, General Amber Force Field and CHARMM General Force Field, have posited guidelines for parameterization of small molecules, many technical challenges remain that have hampered their wide‐scale extension. The Force Field Toolkit (ffTK), described herein, minimizes common barriers to ligand parameterization through algorithm and method development, automation of tedious and error‐prone tasks, and graphical user interface design. Distributed as a VMD plugin, ffTK facilitates the traversal of a clear and organized workflow resulting in a complete set of CHARMM‐compatible parameters. A variety of tools are provided to generate quantum mechanical target data, setup multidimensional optimization routines, and analyze parameter performance. Parameters developed for a small test set of molecules using ffTK were comparable to existing CGenFF parameters in their ability to reproduce experimentally measured values for pure‐solvent properties (<15% error from experiment) and free energy of solvation (±0.5 kcal/mol from experiment). © 2013 Wiley Periodicals, Inc.     

Automatic kinetic model generation and selection based on concentration versus time curves

The goal of the paper is to automatize the construction and parameterization of kinetic reaction mechanisms that can describe a set of experimentally measured concentration versus time curves. Using the framework and theorems of formal reaction kinetics, first, we build a set of possible mechanisms with a given number of measured and unmeasured (real or fictitious) species and reaction steps that fulfill some chemically reasonable requirements. Then we fit all the corresponding mass-action kinetic models and offer the best one to the chemist to help explain the underlying chemical phenomenon or to use it for predictions. We demonstrate the use of the method via two simple examples: on an artificial, simulated set of data and on a small real-life data set. The method can also be used to do a kind of lumping to generate a model that can reproduce the simulation results of a detailed mechanism with less species and thereby can largely accelerate spatially inhomogeneous simulations.     

2013年“菲特”台风暴雨数值模拟中微物理方案的对比试验

利用TRMM（热带测雨雷达）搭载的TMI（微波成像仪）反演廓线资料,分析“菲特”台风登陆前、后云团内部水凝物的分布种类,依此选择WRF区域中尺度模式下符合条件的6个云微物理过程参数化方案（Lin,WSM6,Godgce,WDM6,Morrison以及Thompson方案）,模拟2013年10月6~8日的台风过程.从降水落区、强度,水凝物及风场垂直分布,台风路径及强度等方面对预报性能进行对比,结果表明,选用的6个云微物理方案都较好地模拟了浙江暴雨的范围和强度.结合Ts评分,降水量级越大,模拟效果对云微物理方案选择越敏感,其中,Lin方案效果最佳,尤其对极端降水的模拟,其次为WSM6、WDM6及Thompson方案,Morrison和Godgce方案相对较差.结合水凝物平均值廓线分布发现,除WDM6方案外,其他方案对暖雨过程的模拟基本一致,而对冰相过程的模拟6个方案差别较大;同时,各方案对风分量的模拟结果较水凝物廓线差别小,说明对于动力因素模拟不敏感.另外,6个方案对于台风强度的模拟整体偏弱,相较之下,Lin方案较好地模拟了强度变化趋势.     

Improved semiempirical heats of formation through the use of bond and group equivalents

Deficiencies in energetics obtained using the common semiempirical methods, AM1, PM3, and MNDO, may partly be traced to the use of pseudoatomic equivalents for conversion of molecular energies to heats of formation at 298 K. We present an alternative scheme based on the use of bond and group equivalents. Values for the 61 bond and group equivalents necessary for treatment of molecules containing the common organic elements, hydrogen, carbon, nitrogen, and oxygen have been derived. For a set of 583 neutral, closed-shell molecules mean absolute errors in AM1, PM3, and MNDO heats of formation are reduced from 6.6, 4.2, and 8.2 kcal/mol to 2.3, 2.2, and 3.0 kcal/mol, respectively. Several systematic problems are overcome in the present scheme including relative stabilities of branched hydrocarbons, energetics of conjugated systems, heats of formation of long chain hydrocarbons, and enthalpies of molecules containing multiple heteroatoms. Although the approach is restricted to molecules with well-defined functional groups, the equivalents are easy to incorporate and are chemically relevant. This revised procedure allows semiempirical methods to be used for far more reliable evaluations of heats of reactions. Estimates are made of the errors inherent in these semiempirical formalisms, arising from integral approximations and the neglect of explicit treatment of electron correlation effects, while excluding those from inadequate parameterization.     

基于新型分子距边矢量ν与多元统计方法对于烷烃13C NMR化学位移和(CSS)估计与预测的深入研究

基于本实验室提出一种新型以势能形式表达的分子距边矢量, 深入地系统研究了核磁共振碳-13谱化学位移和(CSS)规律以及分子拓扑指数矢量在定量结构波谱关系(QSSR)中的应用. 借助多种计量化学方法包括多元线性回归、逐步多元回归、主成分回归、主筛选回归等进行分子拟模和定量相关研究, 发现烷烃¹³C NMR 化学位移和(CSS)与其分子距边矢量及路径长度指数有良好线性相关性, 回归方程及其统计参数为:CSS=bν+cp₃=∑_^mj=0b_jν_j+b₁₁p₃=b₀ν+b₁ν₁+b₂ν₂+b₃ν₃+b₄ν₄+b₅ν₅+b₆ν₆+b₇ν₇+b₈ν₈+b₉ν₉+b₁₀ν₁₀+b₁₁p₃=-13.576+22.179ν₁+28.407ν₂+25 .950ν₃+26.690ν₄+14.498ν₅+5.726ν₆-5.379ν₇-3.214ν₈-15.021ν₉ -25.710ν₁₀+12.278p₃ n=63, R=0.997, EV=99.68%, RMS=3.7348, SD=4.1 18, F= 773.116, U=144228.844, Q=864.938; CV: R²_CV=0.980, EV=98.83%, RMS=7.126 1, SD_CV=7.634, F_CV=221.720, U_CV=142121.891, Q_CV=2971 .896.结果良好.     

Tight Distance-Regular Graphs

We consider a distance-regular graph with diameter d 3 and eigenvalues k = ₀ > ₁ > ... > _d . We show the intersection numbers a ₁, b ₁ satisfy