具有平行平均曲率向量场的H稳定子流形

本文讨论局部对称共形平坦Riemann流形N中的紧致H稳定子流形M,若M具于平行平均曲率向量场,则对M的截面曲率或Ricci曲率加上适当的限制条件后,我们证明了M是N中某全脐点子流形N~(N+1)的全脐点超曲面。     

一种基于分块的遥感影像并行处理机制

高性能计算的基础是集群体系下的大规模并行计算.遥感图像处理效率的提高,依赖于并行计算技术的运用.在分析了已有网格计算环境下分布式任务分配方法的基础上,针对远海遥感影像目标物数量相对较少的特点,从软件角度利用四叉树结构对目标区域进行划分,同时采用动态负载均衡的任务分配策略与并行计算的思想,提出了对影像进行并行处理的集群体系任务分配算法模型,实验表明该集群体系下任务分配模型能有效提高图像并行处理的速度.     

Temporal Aberration of the Focused Inhomogeneous Wave from a Misalignment Parallel Grating Pair Compressor

ＴｅｍｐｏｒａｌＡｂｅｒａｔｉｏｎｏｆｔｈｅＦｏｃｕｓｅｄＩｎｈｏｍｏｇｅｎｅｏｕｓＷａｖｅｆｒｏｍａＭｉｓａｌｉｇｎｍｅｎｔＰａｒａｌｅｌＧｒａｔｉｎｇＰａｉｒＣｏｍｐｒｅｓｏｒＸＵＳｈｉｘｉａｎｇＺＨＡＮＧＨｕａＦＡＮＤｉａｎｙｕａｎ（Ｓｈａｎｇ...     

基于改进图划分的异构并行计算模型设计

为了实现大规模计算机集群上的高效分布式并行计算,设计了一种基于改进图划分和量子遗传算法的异构节点并行计算模型;首先,介绍了传统图划分模型并分析了其不足,然后从图的有向性、通信开销计算和负载均衡度等方面对传统的图划分模型进行了改进,从而得到一个改进的图划分模型;最后,以最小化通信开销和优化资源负载均衡为目标,通过设计编码方案,在改进的图划分模型上提出了采用量子遗传算法获取最优任务划分方案的最优解;仿真实验表明:文中方法能有效实现任务的并行计算,与其它方法相比,具有较小的通信开销和较好的负载均衡度,具有很强的可行性。     

Computational performance of Free Mesh Method applied to continuum mechanics problems

The free mesh method (FMM) is a kind of the meshless methods intended for particle-like finite element analysis of problems that are difficult to handle using global mesh generation, or a node-based finite element method that employs a local mesh generation technique and a node-by-node algorithm. The aim of the present paper is to review some unique numerical solutions of fluid and solid mechanics by employing FMM as well as the Enriched Free Mesh Method (EFMM), which is a new version of FMM, including compressible flow and sounding mechanism in air-reed instruments as applications to fluid mechanics, and automatic remeshing for slow crack growth, dynamic behavior of solid as well as large-scale Eigen-frequency of engine block as applications to solid mechanics.     

Use of thermo‐Raman spectroscopy and chemometric analysis to identify dehydration steps of hydrated inorganic samples—application to copper sulfate pentahydrate

In situ thermo‐Raman spectroscopy (TRS) measurements were performed in order to investigate solid‐phase transformation of the copper sulfate pentahydrate from room temperature up to 300 °C. Band‐target entropy minimization (BTEM), a blind‐source separation algorithm, was employed in order to identify and reconstruct the pure component spectra of the species involved in the dehydration process. In spite of low signal‐to‐noise ratio and elevated baseline spectral data, BTEM was successfully utilized to identify and reconstruct four pure component spectra of copper sulfate pentahydrate, trihydrate, monohydrate, and anhydrate, which were formed during this thermally induced process. Subsequent mapping of these four pure component spectral estimates back onto the preprocessed spectra yielded the relative concentrations of each individual species. Finally, the transition temperatures of each dehydration step could be unambiguously deduced from the obtained concentration profile. The current study shows that combined thermo‐Raman spectroscopy and chemometric analysis provides an effective tool to determine the dehydration temperatures as well as to identify the structures of each individual species involved in a solid‐phase dehydration process. Copyright © 2009 John Wiley & Sons, Ltd.     

Performance analysis of an integrated scheme in optical burst switching high-speed networks

A new integrated scheme based on resource-reservation and adaptive network flow routing to alleviate contention in optical burst switching networks is proposed. The objective of the proposed scheme is to reduce the overall burst loss in the network and at the same time to avoid the packet out-of-sequence arrival problem. Simulations are carried out to assess the feasibility of the proposed scheme. Its performance is compared with that of contention resolution schemes based on conventional routing. Through extensive simulations, it is shown that the proposed scheme not only provides significantly better burst loss performance than the basic equal proportion and hop-length based traffic routing algorithms, but also is void of any packet re-orderings.     

图形处理器并行计算用于离子发动机粒子模拟

 为了研究离子发动机羽流对航天器的影响,采用质点网格-蒙特卡罗碰撞方法对离子发动机羽流中的交换电荷离子进行了模拟。利用计算设备统一架构技术,开发出一套基于图形处理器的并行粒子模拟程序。随机数生成采用并行MT19937伪随机数生成器算法,电场方程使用完全近似存储格式的代数多重网格法求解。r-z轴对称坐标系中,在z=0 m处获得的电流密度均值为4.5×10^-5 A/m²,图形处理器所得结果与中央处理器模拟结果吻合。在16核心的NVIDIA GeForce 9400 GT图形显示卡上,取得相对于Intel Core 2 E6300中央处理器4.5~10.0倍的加速比。     

可压缩颗粒圆孔射流并行直接数值模拟算法研究

对空间模式发展的气固两相圆孔射流中颗粒与流体双相耦合作用进行了并行环境下的直接数值模拟算法研究。气相流场采用可压缩的N-S方程直接求解。计算颗粒场时,采用Lagrangian方法跟踪实际的颗粒运动。利用并行求解算法,实现了颗粒穿越边界面的模拟。为了模拟颗粒对流体的作用,考虑了颗粒和流体的双相耦合。在本文的计算条件下,颗粒的直径远小于网格的间距,平均的Kolmogorov尺度和网格的间距在一个量级,保证了DNS的要求。气相和颗粒相的应力与实验的对比研究表明,本文的颗粒并行程序是可信的。     

Some analytical results for congestion in subscriber line modules

In modern telephone exchanges, subscriber lines are usually connected to the so-called subscriber line modules. These modules serve both incoming and outgoing traffic. An important difference between these two types of calls lies in the fact that in the case of blocking due to all channels busy in the module, outgoing calls can be queued whereas incoming calls get busy signal and must be re-initiated in order to establish the required connection. The corresponding queueing model was discussed recently by Lederman, but only the model with losses has been studied analytically. In the present contribution, we study the model which takes into account subscriber retrials and investigate some of its properties such as existence of stationary regime, derive explicit formulas for the system characteristics, limit theorems for systems under high repetition intensity of blocked calls and limit theorems for systems under heavy traffic.