Analysis of selected ionic liquid cations by ion exchange chromatography and reversed-phase high performance liquid chromatography

The chromatographic behavior of 8 ionic liquids - 7 homologues of 1-alkyl-3-methylimidazolium and 4-methyl-N-butylpyridinium - has been investigated with a strong cation exchange adsorbent. In particular, the dependence of the retention properties of these solutes on mobile phase composition, pH, and buffer concentration was evaluated with the aim of optimizing and improving the selectivity and retention of solute separation. While using the SCX stationary phase, several interactions occurred with varying strengths, depending on the mobile phase composition. Cation exchange, nonspecific hydrophobic interactions, and adsorption chromatography behavior were observed. Reversed phase chromatography occurred at low concentrations of acetonitrile, electrostatic and adsorption interactions at higher organic modifier concentrations. Elevated buffer concentrations lowered the retention factors without affecting the selectivity of ionic liquids. Obtained results were further compared to the chromatographic behaviour of ionic liquids in the reversed phase system. All analyzed ionic liquids follow reversed-phase behavior while being separated. Much lower selectivity in the range of highly hydrophilic compounds is obtained. This suggests preferred use of ion chromatography for separation and analysis of compounds below 4 carbon atoms in the alkyl side chain.     

The crystal structure of CuSb2O3Br: Slabs from cubic Sb2O3 interspersed between puckered hexagonal CuBr-type layers

The new compound CuSb₂O₃Br crystallize in the monoclinic space group Cc. The unit cell parameters are , , , β=90°, Z=16. The crystal structure is solved from single crystal data, R=0.0490. The compound show a layered structure with slabs from cubic Sb₂O₃ interspersed in between puckered layers of CuBr. The Sb(III) atoms have tetrahedral [SbO₃E] coordination where E is the 5s² lone pair, these units build up Sb₄O₄E₆ cages. The CuBr layers resemble those in hexagonal CuBr but the Cu(I) ions have actually tetrahedral [CuBr₃O] coordination. The Cu-O bonds link the Sb₄O₆ cages with the CuBr layers.     

Elution of Cationic Species with/without Ion Pair Reagents from Polar Stationary Phases via SFC

Traditionally, the application of supercritical fluid chromatography has been limited to compounds of relatively low polarity. Thus, we report here that one secondary amine and two quaternary amine salts were successfully eluted from a Deltabond Cyano-bonded silica column with the addition of sodium alkylsulfonate to the methanol-modified, carbon dioxide-based mobile phase. A possible ion-pairing interaction between the positively charged analytes and the anionic part of the sulfonate additive has been proposed. In another set of experiments, the three amine salts readily eluted from both Ethyl-pyridine-bonded silica and Amino-bonded silica phases without the need of additive although the peak shapes were less than desirable. The addition of sulfonate salt to the mobile phase again sharpened the peaks. In the presence of a mixture of methanol and CO₂, we suggest that these stationary phases are positively charged. We describe here also for the first time the employment of a strong silica-based anion exchange (SAX) column for supercritical fluid separation of cationic species. Two elution mechanisms were proposed for the three amine salts depending upon whether the ionic additive was incorporated into the mobile phase. Separation as the ion-pair was proposed with an ionic additive in the mobile phase; whereas separation of the intact amine salt from the positively charged basic stationary phases was suggested to be operational without the ionic additive.     

Kinetics and mechanisms in carbocationic polymerization: The quest for true rate constants

This article is a critical analysis of kinetic dataavailable on carbocationic polymerizations. A survey of published propagation rate constant (k_p) data revealed several orders of magnitude differences. In this article, an explanation of this apparent discrepancy is offered with a case study involving the carbocationic polymerization of 2,4,6‐trimethylstyrene (TMS). With the polymerization mechanism originally proposed for this system, k_p = 1.35 × 10⁴ L mol^?1 s^?1 was extracted from experimental data with the Predici polyreaction package. The alternative mechanism yielded k_p = 1.01 × 10⁷ L mol^?1 s^?1, close to that predicted by Mayr's Linear Free Energy Relationship (LFER). We propose that true rate constants can only be obtained from direct competition experiments or from kinetic interpretation based on independently proven mechanisms. The second part of this review discusses critical analysis of the temperature and concentration dependence of various living IB systems. Comparison of the temperature dependence in systems initiated with 2‐ chloro‐2,4, 4‐ trimethylpentane (TMPCl)/TiCl₄ from various laboratories yielded of ΔH ～?25 and ?34.5 kJ/mol for high and low TMPCl/TiCl₄ ratios, respectively. Aromatic (cumyl‐type) initiators show ΔH ～ ?40 kJ/mol, whereas H₂O/TiCl₄ in the presence of the strong electron‐ pair donor dimethylacetamide gave ΔH = ?12 kJ/mol. The significant differences indicate different underlying mechanisms with complex elementary reactions. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5394–5413, 2005     

Conductometric study of Bu4NClO4 in propylene carbonate-acetonitrile and propylene carbonate-toluene mixtures at 25°C

Conductometric measurements of tetrabutylammonium perchlorate in propylene carbonate-acetonitrile and propylene carbonate-toluene mixtures at 25°C are reported. Limiting molar conductances, association constants and distance of closest approach of ions are calculated. The experimental data were analyzed by means of the Lee-Wheaton equation. The Gilkerson's solvent-solute interaction energy term was calculated from a plot of association constant logarithmvs. reciprocal dielectric constant.     

The effect of pressure on the dissociation constant of hydrofluoric acid and the association constant of the NaF ion pair at 25°C

The effect of pressure on the dissociation constant of hydrofluoric acid was determined by using the indicator technique at 25°C at an ionic strength of 0.1m over a pressure range of 1 to 2000 atm. A value of 3.14 for pK _a ^* at I =0 was obtained by extrapolation to zero ionic strength at 1 atm. The pressure dependence yielded a partial molar volume change of –9.6 cm³-mol^–1 and a compressibility change of — 35×10^–3 cm³-mol^–1 –atm^–1 for the dissociation. The dependence of ionic strength on the association constant K _A ^* of NaF was studied at 25°C and 1 atm. Extrapolation to I=0 yielded a pK _A ^* of –0.78. The pressure dependence of K _A ^* gave a change of volume of 3.26 cm³-mol^–1 and a change in compressibility of 6×10^–3 cm³-mol^–1-atm^–1 for the formation of the ion pair.     

Ketoconazol‐Triiodide Ion Pair Complex as a Suitable Carrier in an Iodide Selective Membrane Electrode

A novel membrane sensor for selective monitoring of iodide, consisting of a triiodide‐ketoconazole ion pair complex dispersed in a PVC matrix, plasticized with a mixture of 2‐nitrophenyl octyl ether and dioctylphtalate with unique selectivity toward iodide ions, is described. The influence of membrane composition, pH of test solution and foreign ions on the electrode performance were investigated. The optimized membrane demonstrates a near‐Nernstian response for iodide ions over a wide linear range from 1.0 × 10^?2 to 1.0 × 10^?5 M, at 25 ± 1 °C. The electrode could be used over a wide pH range 3–10 and has the advantages of high selectivity, fast response time and good lifetime (over 4 months). It was successfully used as indicator electrode in potentiometric titrations and direct potentiometric assay of iodide ions.     

Molecular modeling on recognition of sheared and normal DNA by novel metal complex Λ- and Δ-[Co(phen)2hpip]

Recognition of sheared and normal DNA by a novel metal complex [Co(phen)₂hpip]³⁺ (phen=1,10-phenanthroline, HPIP=2-(2-hydroxyphenyl)imidazole[4,5-f][1,10]phenanethroline) is studied by molecular modeling. Calculating results indicate that, this complex can specifically recognize DNA segment of sequence –MMNNMM– (M means mismatch base pairs and N means normal base pairs). Intercalating from minor groove between the middle normal duplex into the sheared DNA with the depth of 1.2 nm is of preference and enantioselectivity is observed. Comparison on the two DNA structures of optimal conformation and analysis on the interaction between DNA and the two tail ligands of the complex show that, the effect of the two neighboring mismatch duplexes on the structure of the middle normal base pairs and the steric interaction between the mismatch duplexes and the two tail ligands of the complex are the essential reason to the segment specificity. Investigation on the detailed energy terms indicate that, in effecting enantioselectivity, the electrostatic distribution of the complex is in the majority and steric interaction is at the next place. But, steric interaction is surely the only factor determining the intercalating from minor groove.     

The Oxidation of Heterogeneous Tl/Ni/P‐Alloys — Preparation and Crystal Structures of the Thallium Nickel Phosphates TlNi4(PO4)3, Tl4Ni7(PO4)6, and Tl2Ni4(P2O7)(PO4)2

Single crystals of the first anhydrous thallium nickel phosphates were prepared by reaction of heterogeneous Tl/Ni/P alloys with oxygen. TlNi₄(PO₄)₃ (pale‐yellow, orthorhombic, space group Cmc2₁, a = 6.441(2)Å, b = 16.410(4)Å, c = 9.624(2)Å, Z = 4) crystallizes with a structure closely related to that of NaNi₄(PO₄)₃. Tl₄Ni₇(PO₄)₆ (yellow‐brown, monoclinic, space group Cm, a = 10.711(1)Å, b = 14.275(2)Å, c = 6.688(2)Å, β = 103.50(2)°, Z = 8) is isotypic with Na₄Ni₇(PO₄)₆, and Tl₂Ni₄(P₂O₇)(PO₄)₂ (brown, monoclinic, space group C2/c, a = 10.389(2)Å, b = 13.888(16)Å, c = 18.198(3)Å, β = 103.1(2)°, Z = 8) adopts the K₂Ni₄(P₂O₇)(PO₄)₂ structure. Tl₂Ni₄(P₂O₇)(PO₄)₂ could also be prepared in nearly single phase form by reaction of Tl₂CO₃, NiO, and (NH₄)₂HPO₄.     

Photoreduction of o-benzoquinones in the presence of p-bromo-N,N-dimethylaniline

Photoreduction of o-benzoquinones in the presence of p-bromo-N,N-dimethylaniline under irradiation ( > 500 nm) affords the corresponding pyrocatechols and hydroxyphenyl ethers. The latter are unstable and, in turn, decompose in the dark reaction to pyrocatechols. The ratio between pyrocatechol and hydroxyphenyl ether formed upon the photoreaction is determined by the structure of o-quinone, namely, the presence and bulk of substituents in positions 3 and 6 of the ring. The yield of pyrocatechol is maximal (60—65%) if the substituents are the same (H and H, Bu^t and Bu^t) or insignificantly differ (Prⁱ and Bu^t), regardless of its bulk.